** Post all your BSNL Broadband Related Queries Here **

yrana2002

Ambassador of Buzz
Re: **Post all your BSNL Dataone Related Queries Here**

Well, i've done that.. we'll have to see how well it works, but what is the logic behind that thing?
 

skghosh44

dig_boy_dig,dig !
Re: **Post all your BSNL Dataone Related Queries Here**

DUF (Dataone Usage Finder)
*duf.sourceforge.net/
Is this software safe to install in pc to see the Data One usage.
 

direfulsky

Broken In
Re: **Post all your BSNL Dataone Related Queries Here**

IS data one is down there?I am from lucknow and around 1 pm i got disconnected...till now its no connectivity. my adsl link is ok.. but there is no activity on data link led.did checked the modem configration page and found not connected..
do update me please..
thanks
 

ravi_9793

TechTin.com
Re: **Post all your BSNL Dataone Related Queries Here**

direfulsky said:
IS data one is down there?I am from lucknow and around 1 pm i got disconnected...till now its no connectivity. my adsl link is ok.. but there is no activity on data link led.did checked the modem configration page and found not connected..
do update me please..
thanks
are you using USB or LAN for connectivity??
 

ravi_9793

TechTin.com
Re: **Post all your BSNL Dataone Related Queries Here**

direfulsky said:
i am using lan connectivity and my lan link is up and running
start-->>run-->>type cmd and press enter
Command prompt will open.
type
ping 192.168.1.1


and post the result.
 

direfulsky

Broken In
Re: **Post all your BSNL Dataone Related Queries Here**

here is the ping result
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\amresh>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128

Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms

and here is my modem settings:
Internet(WAN) Configuration:
VPI / VCI 0 / 38
Service Category UBR Without PCR
Connection Type PPPoE LLC/SNAP, Always On
PPPOE AC Not Configured
NAT On
WAN IP Address Automatically Assigned
Default Route On

Configure Connection Type


Select the protocol and encapsulation type with the ATM PVC that your ISP has instructed you to use.
Protocol: PPP over ATM (PPPoA)
PPP over Ethernet (PPPoE)
RFC1483(Routed)
Bridging
Encapsulation Type: LLC/SNAP
 
Last edited:
Re: **Post all your BSNL Dataone Related Queries Here**

direfulsky said:
here is the ping result
Microsoft Windows XP [Version 5.1.2600]

and here is my modem settings:
Internet(WAN) Configuration:
VPI / VCI 0 / 38
Service Category UBR Without PCR
Connection Type PPPoE LLC/SNAP, Always On
PPPOE AC Not Configured
NAT On
WAN IP Address Automatically Assigned
Default Route On

Seems like the modem has lost the settings but you can confirm that by doing a ping to www.google.com and see if it times out. Could you please mention the model of the modem so that we can troubleshoot further.
 
Re: **Post all your BSNL Dataone Related Queries Here**

direfulsky said:
Siemens C2110...

did you try ping www.google.com ? What is the reply? timing out or are you getting replies?

If the answer is timing out, then please do a "tracert www.google.com" instead of ping without the commas and paste it here.
 

ravi_9793

TechTin.com
Re: **Post all your BSNL Dataone Related Queries Here**

direfulsky said:
here is the ping result
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\amresh>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128

Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms

and here is my modem settings:
Internet(WAN) Configuration:
VPI / VCI 0 / 38
Service Category UBR Without PCR
Connection Type PPPoE LLC/SNAP, Always On
PPPOE AC Not Configured
NAT On
WAN IP Address Automatically Assigned
Default Route On

Configure Connection Type


Select the protocol and encapsulation type with the ATM PVC that your ISP has instructed you to use.
Protocol: PPP over ATM (PPPoA)
PPP over Ethernet (PPPoE)
RFC1483(Routed)
Bridging
Encapsulation Type: LLC/SNAP
open IE
enter address 192.168.1.1
You will be aksed user name and password...
user name-->> admin
password-->> admin

There click on WAN.
see..wht is the status in WAN page.
 

direfulsky

Broken In
Re: **Post all your BSNL Dataone Related Queries Here**

my modem failed to get assigned an WAN IP address..as i said in my preveous post my ADSL and LAN link is up and stable..

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\amresh>ping www.google.com
Ping request could not find host www.google.com. Please check the name and try a
gain.

C:\Documents and Settings\amresh>ping www.google.com
Ping request could not find host www.google.com. Please check the name and try a
gain.

C:\Documents and Settings\amresh>
 
Last edited:

ravi_9793

TechTin.com
Re: **Post all your BSNL Dataone Related Queries Here**

direfulsky said:
my modem failed to get assigned an WAN IP address..as i said in my preveous post my ADSL and LAN link is up and stable..

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\amresh>ping www.google.com
Ping request could not find host www.google.com. Please check the name and try a
gain.

C:\Documents and Settings\amresh>ping www.google.com
Ping request could not find host www.google.com. Please check the name and try a
gain.

C:\Documents and Settings\amresh>
just give me a print page of WAN
 
Re: **Post all your BSNL Dataone Related Queries Here**

direfulsky said:
my modem failed to get assigned an WAN IP address..as i said in my preveous post my ADSL and LAN link is up and stable..

C:\Documents and Settings\amresh>

Go into the WAN configuration and just try recreating the account by putting in your broadband username and password. Rest of the settings seems to be fine. If it still doesn't work, you will need to contact your BSNL office to report the problem
 

gary4gar

GaurishSharma.com
Re: **Post all your BSNL Dataone Related Queries Here**

direfulsky said:
and here is my modem settings:
Internet(WAN) Configuration:
VPI / VCI 0 / 38
y


use 35 instead of 38 For VCI
 
Last edited:
Re: **Post all your BSNL Dataone Related Queries Here**

^^ Yes, you are right, didn't notice that. I'm still working with 0,38 in the UK, so overlooked that.. sorry..

But like I mentioned before, seems like the entire modem has been reset unless you are not telling us that you pressed the reset button:D So, you'll need to reconfigure it.
 

brainstar

Right off the assembly line
Re: **Post all your BSNL Dataone Related Queries Here**

hi dis is brainstar
this problem is common if ur using dareglobal DB108 modem even i've seen a few cases like these ur link will be proper and also u'll get authentication failure in ur router ..........
complaint to bsnl about it in ur nearest exchange and ask them for change in modem..........:p

hi ppl iam a bsnl bangalore customer iam having really huge problems with my account usage. As we all know bsnl won't provide bandwidth usage seperately for night unlimited and normal usage separately. I downloaded shareplu bandwidthmeter 2.7 and also dataone usage finder but the problem is dat i can't see my account details in any one of dat cos it shows account login failed even though i've tried for several times with correct username and password also i've used datafox-mozilla extension for the same problem. The problem have not been solved even though i try with different urls.......plz give me a proper solution for this problem........
i regularly see my account usage in *10.0.0.16:8080
 
Last edited:

utsav

damn busy...
Re: **Post all your BSNL Dataone Related Queries Here**

hey i don't hav bsnl landline.so what will be d initial cost of getting the landline and home 500 plan with a type 1 modem.type 1 modem is for Rs 1200 . and how much i have to pay for getting d connection and landline.

i don't want to use bsnl landline .do i hav 2 pay its monthly rental also
 

src2206

In the zone
Re: **Post all your BSNL Dataone Related Queries Here**

Hi

I use the Black Huawei modem. I do not need the wireless connectivity to be enabled. So how can I exactly disable the wireless connectivity option?

Thanks.
 
Top Bottom