My first post from Ubuntu

Status
Not open for further replies.

FilledVoid

Who stole my Alpaca!
Joined
Jan 4, 2005
Messages
1,826
BTW,for 64-bit u need nspluginwrapper for running these 32-bit plugins.do u have that?
If I recall correctly I dont think I do cause everyone on ubuntuforums.org says that there is a working application for every 32 bt counterpart =x. But I will check that. I installed the driver fromt he restricted driver manager on boot or so at least I think cause I got the little baloon popup asking me to use it. I have an onboard 6150 on my Asus M2N MX SE.
 

Desmond

Destroy Erase Improve
Staff member
Admin
Joined
Apr 9, 2005
Messages
9,643
Welcome to Ubuntu,

Can you help me connect my LG C2500 using Airtel GPRS the same way?
 
OP
din

din

Tribal Boy
Joined
Jun 30, 2004
Messages
1,686
DeSmOnD dAvId said:
Welcome to Ubuntu,

Can you help me connect my LG C2500 using Airtel GPRS the same way?

I followed the instructions from here

With small modifications, it worked perfectly for me. Please give a try and post details.

Also, if you are on Ubuntu, use sudo instead (as you already know that)
 
Last edited:

praka123

left this forum longback
Joined
Sep 7, 2005
Messages
7,473
u can verify 3D working by running: Press alt+f2 for run dialogue and enter "glxgears" and make sure gears are rotating smooth.else check in terminal
"glxinfo |grep render"
^it shud say yes.
 

FilledVoid

Who stole my Alpaca!
Joined
Jan 4, 2005
Messages
1,826
praka123 said:
u can verify 3D working by running: Press alt+f2 for run dialogue and enter "glxgears" and make sure gears are rotating smooth.else check in terminal
"glxinfo |grep render"
^it shud say yes.

Yay ! My gears are running smooth :)
 

ray|raven

Think Zen.
Joined
Dec 11, 2005
Messages
1,482
Sometimes gears run smooth even if direct rendering is disabled.
Use
Code:
glxinfo | grep direct
to see if direct rendering is enabled.
Also run glxgears in terminal to see the fps.
Running from Alt+F2 doesnt show that.
Alternatively u can open xorg.conf and see if module "dri" is loaded.
You should find it @ /etc/X11/

Regards,
ray
 

praka123

left this forum longback
Joined
Sep 7, 2005
Messages
7,473
^yes.my glxinfo |grep render command too is for looking for direct render=yes or no :p
i think he got an on-board nvidia which needs nvidia-restricted manager to install proprietory drivers.anyway "nv" driver may be running for him."dri" shud not be loaded for nvidia 3D drivers.nvidia-glx-new is needed.in /etc/X11/xorg.conf @exx look for section device driver for "nvidia".
 

FilledVoid

Who stole my Alpaca!
Joined
Jan 4, 2005
Messages
1,826
glxinfo | grep direct This command gives me direct rendering = Yes .

Code:
Section "Device"
	Identifier	"Generic Video Card"
	Driver		"nvidia"
	Busid		"PCI:0:13:0"
	Option		"AddARGBVisuals"	"True"
	Option		"AddARGBGLXVisuals"	"True"
	Option		"NoLogo"	"True"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	Horizsync	30-70
	Vertrefresh	50-160
EndSection

I have this in my xorg.conf . Is that a Good Thing or a Bad Thing
 

praka123

left this forum longback
Joined
Sep 7, 2005
Messages
7,473
^gr8,u got nvidia drivers installed and configured.
BTW,are u able to browse sites such as *ibnlive.com which extensively uses Flash in ur ubuntu?
 

FilledVoid

Who stole my Alpaca!
Joined
Jan 4, 2005
Messages
1,826
Yes I can open *ibnlive.com/ and I believe everything is displayed. Theres a little media player too but due to my dial up connection Im not going to even try opening it :D.
 

gary4gar

GaurishSharma.com
Joined
May 21, 2005
Messages
4,073
hmmm...you guys are lucky
i am still stuck with unichrome chipset
it can't even play movies nicely:(
lets see if supports improves in it:-?
so if there any chance of a better driver??
 

ray|raven

Think Zen.
Joined
Dec 11, 2005
Messages
1,482
Hmm,Unichrome.
I remember a friend having a chipset with it and he had Mandriva on it.
It ran quite well AFAICR.
He was even quite impressed about Mandriva(Was his first linux install ;))
Maybe u should try Mandriva and see.

Regards,
ray
 

praka123

left this forum longback
Joined
Sep 7, 2005
Messages
7,473
gary4gar said:
hmmm...you guys are lucky
i am still stuck with unichrome chipset
it can't even play movies nicely:(
lets see if supports improves in it:-?
so if there any chance of a better driver??
Are baba:eek:,leave that !#@$% onboard and get a nvidia card.i have got more bald when i used via mobo :cry: ofcourse openchrome guys are trying even some cards got DRI(3D) support too via openchrome.but...i think its a waste waiting for via to support fully.even i heard their win xp drivers sucks.
 

gary4gar

GaurishSharma.com
Joined
May 21, 2005
Messages
4,073
praka123 said:
Are baba:eek:,leave that !#@$% onboard and get a nvidia card.i have got more bald when i used via mobo :cry: ofcourse openchrome guys are trying even some cards got DRI(3D) support too via openchrome.but...i think its a waste waiting for via to support fully.even i heard their win xp drivers sucks.
well for that i need a overhaul
atpresent i have
Amd athlon 64 3000+
Msi-k8mm-v
1gb DDr ram 400mhz
and the most interesting part
300w mercury power supply:D
do you think a it can handle a gfx card:p
 

gary4gar

GaurishSharma.com
Joined
May 21, 2005
Messages
4,073
QwertyManiac said:
A new 400W SMPS won't cost you much. :)
Dont read if you are busy
[offtopic]well i am really short of money these days, damm college, i give almost all of pocket money goes into mobile,petrol & misc stuff( now please don't ask about misc stuff:p)[/offtopic]
:arrow:Read this
Ontopic
how much a 400w watt psu will cost?
also availability in my city
 

sivarap

In the zone
Joined
Mar 7, 2007
Messages
343
Windows vista sucks.....see this post
*www.thinkdigit.com/forum/showthread.php?t=73121
also...my explorer hangs for no reason....many games don't work......
I am so dejected....I am going in for UBUNTU.....
can someone post a link for startup?
 

QwertyManiac

Commander in Chief
Joined
Jul 17, 2005
Messages
6,575
Ubuntu Help is the place to be.

Start with HOWTO-Install:
*help.ubuntu.com/community/Installation

And then read stuff on Help:
*help.ubuntu.com/community/
 
Status
Not open for further replies.
Top