jumper

  1. stellar

    Primary Hard Disk Not Detected

    I have ESC 945 GCT-M2/1333 Motherboard. I have 80 GB PATA HDD and I added another 500 GB SATD HDD. The Jumper setting on PATA HDD was on primary but I changed it into secondary and made the SATA jumper Primary and installed Windows 8 in it. (PATA HDD Windows 7 Installed) But windows 8 didn't...
  2. gurujee

    Replacing HDD in laptop : Problem

    My 5 year old hard disc almost died some days ago. Thats why i bought a new one Segate Momentus 500 gb from flipkart which has sata3 port where as my laptop config says old hd was sata1. I had inquired about it in net and found out that sata3 is backward compatible. I am a noob. I havent...
  3. N

    HD Not working

    I recently purchased Western Digital WD10EARX 1TB Hard Drive. My Mobo is pretty old (Intel DG31PR) but after making sure that a SATA 3 Drive would work on it, I made the purchase. Now according to the instructions mentioned on WD's site I used a jumper pin to slow down its speed as well. The...
  4. C

    Did I blow my hard disk?

    So I read about the hard drive speed limiting jumpers and immediately removed it from my 4 year old segate (or whatever) 7200.11 drive, hoping it'll be able to run @ 3gbps. But since then, my of doesn't boot. The fans are on, the drive is spinning, but there's no display, even when I put the...
  5. quan chi

    How to enable another HDD.please help.

    Guys i have a 80gb IDE HDD. I got another 250gb SATA hdd.Now after adding the sata when i booted windows 7 detected the HDD and gave message successfully installed the new device.But i cannot find it or it is not being shown in the hdd list.I only see those old partition of 37 and 38 gb.:(...
  6. C

    Mid Gaming Pc (Any suggestions to make it better)

    AMD Phenom II X4 955 3.2 Ghz Black Edition Gigabyte 880GM-USB3 Usb3/D3 Thermaltake Contac21 / Coolermaster Hyper TX3 AeroCool RS-9 Devil Red Seagate Barracuda Sata3 500Gb HDD Zotac Gtx 550 Ti AMP! (1GB Factory OC'd DDR5) / HIS 6790 Fan 1GB GDDR5 Samsung Syncmaster S19A300B 18.5" Wide...
  7. ajayritik

    Need help setting up internal HDD in external HDD box

    I have bought an external HDD enclosure so that I can use my old IDE HDD as external HDD. However when I connected everything I don't find the HDD being detected. Can someone please help me on this. Also in the manual it's mentioned that the HDD Should be set up as Master. Do I do this using...
  8. Z

    9500GT - No Display

    Recently i installed a 9500GT nvidia GFX card into my rig :- AMD 7750 BE @2.7ghz Jetway PA74M5 mobo 3 Gb ram 320 Gb hard disk 9500GT Before i could use my new 9500Gt for my Games , i disabled internal graphics option in bios. Then my pc would not display anything on the screen I then...
  9. sanoob.tv

    no signal on monitor

    i was installin windows 7 on my freinds machine,it asked for some drivers in order to continue installation,i went to get my mobo cd,when i returned it was all gone,(blank screen) i restarted the system,and the monitor displayed "no signal", in the cpu all the fans are spinning,can hear the...
  10. Techn0crat

    PC is running but there is no display

    First here is config CPU-Intel C2D 2.33GHz (E 6550) MoBo-Intel DG33FB RAM-Transcend 2 GB 667MHz HDD-WD 250 GB Display-Viewsonic 19" Widescreen LCD Now my problem is whenever I start my PC everything is running but there is no display.I thought it might be thermal paste so I checked and spread a...
  11. D

    How to configure SATA and ATA HDD in a single system

    Hi to all, My name is Babu. I've computer system and two Hard disks. One HDD is SATA(160 GB) and another one is ATA(80 GB) HDD. Currently I'm using SATA HDD. I'm looking to attach ATA HDD as Master and SATA HDD as Slave. I'm not getting how to fix both of that HDDs in a single system. Is it...
  12. A

    Flashing my BIOS

    I have a ASUS M2N SLI Dx Motherboard. Today, when starting my comp, after the POST I was presented with a blank screen, and nothing was happening. There was no light from the HDD LED too. Thinking that Windows had crashed once again I tried booting from my Windows Boot CD. However the BooT CD...
  13. mad1231moody

    Where do I find ???

    Friends certainly I am asking for one of the tiniest components of the computer. Yes, I am in need of a jumper for a SATA-II HDD. Asked the local computer assembler. Went roaming around in Lamington. Even went to the seagate office in Bombay Central. They all have no idea. Now I am really in...
  14. S

    How to Install 2 Hard Disks?

    I want to recover the data of a corrupted hard disk. When I connected the HDD to a good computer it does not boot at all.When I use only one HDD it boots normally.I have used the jumper settings of the corrupted HDD as slave . What other things to be considered before installing the 2nd HDD.
  15. R

    Should I remove Sata 2 jumper???

    Config in my signature , all my drives are sata 2 & they have a jumper, will removing them increase the transfer speed? I read somewhere that jumper is meant to make it sata1, removing it will make it sata 2.Before doing it I just want to confirm. I checked that my mobo supports sata 2 with...
  16. Ishan

    change in Ghz

    few days back, my friend bought a new PC, intel P4 of 2.06 Ghz when he went home he saw in BIOS and found to be written as 1 GHz Now he took his PC again to the shop, and that person told that it is due to some jumper problems...so he took out one jumperpin from his mobo and inserted it...
  17. techtronic

    IDE vs SATA Jumper Settings

    In IDE, we use the jumper settings to distinguish Primary or Secondary Master and Slave Drives But in SATA, there is no jumper setting. If we connect two SATA HDDs simultaneously to the motherboard, with each having its own OPERATING SYSTEM installed in it, then which one of the OS would...
  18. I

    Problem installing SATA HDD

    Hi guys. I bought a brand new Seagate barracuda 120 gb SATA drive yesterday. I have a A7N8X-E Deluxe mobo. I installed the drive using the given connectors for the motherboard and the power supply. I checked the jumper settings to see if SATA is enabled. I connected it to SATA RAID1. However the...
  19. rajat22

    Bios Unleashed

    Bios Unleashed well actually ppl here may knw this but agin i wish to share this As you can see there are various ways on bypassing/changing BIOS passwords. I have successfully used all of the options below on various computers many years ago. These methods will work on...
  20. R

    Compaq refusing 40GB Harddisk..!!!

    Hi, :D I got compaq Dekpro 2000 series pc. The old hard disk of 2Gb was not working. So i put a new 40GB / 7000 rpm Samsung Harddisk. But the pc is not detecting the harddisk :!: . I have allready tried all the jumper settings in hard disk. Is there any jumper setting in mother board? Ram...
Top Bottom