That's about the time a XFX card lasts, in case of two of my friends both had XFX 8800GT and their card lasted about 1.8 yrs or so, after that massive load temps followed by crash in game, get it rma'd and never buy XFX again, their Quality check on GPU is done by playing tetris and pacman and loading windows 98about 1 year 9 month![]()
Look here: *www.thinkdigit.com/forum/hardware-q/96218-latest-prices-83.html#post1273130Do think i will get the card replaced??4th octobar 2010 my warranty will be over.Rashi should agree that it is overheated they will receive or not??Guys do u know about rashi kolkata.Earlier my friend gets xfx gt9400 512 mb ddr2 instead of 8600 gt.
The fans broken, it'll continue to degrade over time, try the rma before time runs out.@tkin and topgear-- after opening the cabinet i have noticed that the fan of XFX 8600 gt is not working after touching the fan its start working and magically the temperature also start decreasing and now the idle temperature is 60 degree and on load 72 degree Celsius.So what should i do now?They will not accept if no problem was found ??
can somebody suggest a good cpu temperature monitor. real temp doesn't support my processor.
can somebody suggest a good cpu temperature monitor. real temp doesn't support my processor.
The fan controller diodes are more relevant to control the fan speeds according to differences in temperatures than to get an accurate reading. There is always a difference in actual temperatures and those recorded by the diodes since you can't place them physically in contact with the heat sources. Moreover, this difference gets larger with rise in temperature. So you still need software to read the inbuilt temperature probes from the hardware for an accurate reading.if its an issue, just get some fan controllers with temp diodes.
can somebody suggest a good cpu temperature monitor. real temp doesn't support my processor.
CoreTEMP and/or Everest Lavalys.
try Everest or HWMonitor Pro - using it currently and it's very good and showing all temps accurately
coretemp is also good but sometime it's just not able to display all cores temp.
coretemp works fine for me
though i personally like HWMonitor
The fan controller diodes are more relevant to control the fan speeds according to differences in temperatures than to get an accurate reading. There is always a difference in actual temperatures and those recorded by the diodes since you can't place them physically in contact with the heat sources. Moreover, this difference gets larger with rise in temperature. So you still need software to read the inbuilt temperature probes from the hardware for an accurate reading.