** Post all your BSNL Broadband Related Queries Here **

mAYHEM

Journeyman
Re: **Post all your BSNL Dataone Related Queries Here**

plank123 said:
I've got this peculiar problem with my Huawei MT-841 modem. When I switch on the modem, the Power LED and the LAN1 LED starts glowing immediately. However, the ADSL LINK LED starts glowing only after 3-4 minutes. Is this glowing of ADSL LINK LED after a delay normal?

If abnormal, what could be the problem?
Thats abnormal my adsl link led starts glowing in less than 15 sec.

Anybody plz help me,i am not able to connect to dataone.Dialup says"phone line busy"(bridged mode) or it disconnects after few miins.Haning no problem with the ADSL link.
 

gary4gar

GaurishSharma.com
Re: **Post all your BSNL Dataone Related Queries Here**

mAYHEM said:
i can only connect 2 or 3 hours a day.Most of the times it says phone line busy or it disconnects automatically after few mins.
use the follwing values

I.p address:192.168.1.2
subnet mask:225.225.225.0
default gate way:192.168.1.1

dns servers
61.1.96.69
61.1.96.71

turn off DHCP


also what error do u get. pls give the error no.
 

gary4gar

GaurishSharma.com
Re: **Post all your BSNL Dataone Related Queries Here**

@chirag
well when we keep DHCP on then we don't have to give the ip adress, subnet and all those values.but somethimes DHCP cause problems so we can keep it off
 

mAYHEM

Journeyman
Re: **Post all your BSNL Dataone Related Queries Here**

gary4gar said:
@chirag
well when we keep DHCP on then we don't have to give the ip adress, subnet and all those values.but somethimes DHCP cause problems so we can keep it off
From where to turn dhcp off.
 

Chirag

Cyborg Agent
Re: **Post all your BSNL Dataone Related Queries Here**

Sometimes my connection gets d/c and starts again automatically and then no site opens. I have to take out power cable and put it again. I m not using main phone line frm pole. So the prob is coz that phone like or something else?
Any idea?
 

plank123

Right off the assembly line
Re: **Post all your BSNL Dataone Related Queries Here**

For users of Type -III or Type IV (Huawei MT841) ....

How many of u have upgraded to the latest firmware of the MT841 modem? Have you noticed any difference?

(NEW FIRMWARE version - MT841_V100R001C01B021SP03 of 23rd December 2005 )

Thanx.
 
Last edited:

gary4gar

GaurishSharma.com
Re: **Post all your BSNL Dataone Related Queries Here**

mAYHEM said:
From where to turn dhcp off.
well check in lan group one!
its in this screenshot *img241.imageshack.us/img241/4825/lanlh7.th.png
also pls check other ways to turn off DHCP b'cos i cannot see whats ur menu layout & it is completly diff from menu of my router.
__________
Chirag said:
Sometimes my connection gets d/c and starts again automatically and then no site opens. I have to take out power cable and put it again. I m not using main phone line frm pole. So the prob is coz that phone like or something else?
Any idea?
when it discounts does the ADSNL link go off??
when yes there is some problem in ur line like earthing if no then some lose connection in ur lan or some settings.
 
Last edited:

mAYHEM

Journeyman
Re: **Post all your BSNL Dataone Related Queries Here**

@gary4gar
The main problem was usb drivers,they were really buggy.Now i am using with my ethernet card.The bridged mode and dialup work fine,but the always on or PPPoE connection isnt still working

My System Log
--------------------------------------------------------------------
Valid Configuration Tree
stat successfull for /etc/resolv.conf.
Resolver Polling Timer Started succesfully.
NTP Polling Timer for DHCP Started succesfully.
DSL Polling Timer Started succesfully.
Firewall NAT service started
del_iptable_rules : ppp_name not intact
Bridge Created: br0
updateall_servers : No children found for conn:
Bridge Created: br1
Bridge Interface Added: eth0
Bridge Interface Added: usb0
DSL Carrier is down
del_iptable_rules : ppp_name not intact
DSL Carrier is up
auto_vcc_default oamPing(0.35)result(2)
auto_vcc_default oamPing(0.32)result(2)
auto_vcc_default oamPing(0.40)result(2)
auto_vcc_default oamPing(0.36)result(2)
auto_vcc_default oamPing(0.3)result(2)
auto_vcc_default oamPing(0.96)result(2)
auto_vcc_search oamPing(0.35)result(2)
auto_vcc_search oamPing(8.35)result(2)
auto_vcc_search oamPing(0.43)result(2)
auto_vcc_search oamPing(0.51)result(2)
auto_vcc_search oamPing(0.59)result(2)
auto_vcc_search oamPing(8.43)result(2)
auto_vcc_search oamPing(8.51)result(2)
auto_vcc_search oamPing(8.59)result(2)
Conn Delay Timer started for 50 sec
pppd 2.4.1 started by root, uid 0
TimerEvent: PPPoE not in a state to handle it; currState

I got these Primary and Secondary values from a bsnl site.Primary DNS as (61.1.96.69 – East, 218.248.255.145- South, 218.248.255.193- North, 218.248.255.177- West region) and Secondary DNS as (61.1.96.71 – West, 218.248.255.145- North, 218.248.255.193- South, 218.248.255.177- East Region) are these values right.

Is the cat5e cable given with dlink router a crossover cable so that i can use to connect laptop and computer
 

gary4gar

GaurishSharma.com
Re: **Post all your BSNL Dataone Related Queries Here**

*img167.imageshack.us/my.php?image=newconnyn1.png

refer to this & set max alive as "9999999"= input maximum possible time.

also go to the status tab & tell me whats the connection status
 

mAYHEM

Journeyman
Re: **Post all your BSNL Dataone Related Queries Here**

gary4gar said:
*img167.imageshack.us/my.php?image=newconnyn1.png

refer to this & set max alive as "9999999"= input maximum possible time.

also go to the status tab & tell me whats the connection status
Conection Status Says
State->Disconnected
Disconnect Reason-> NA

System Log says something like cant create PPPoE connection.Whats the default username and password when using with telnet,tried combinations of admin and root.
 

abdulmuqsith

Right off the assembly line
Home 900UL Plus - first bill

Hi

I am new to this thread.

I am planning to take BSNL's Home 900 UL Plus plan. I don't have a phone connection. Can anybody help me out what could the first bill look like .. bcz have heard lot of discripencies in the billing?

How much I 've to pay them initially? ( i will buy ADSL modem and splitter from outside).

If anyone got the first bill .. plz paste the contents .. tht could be helpful to me.

thnx
 

crownabhisek

Broken In
Re: **Post all your BSNL Dataone Related Queries Here**

I'm using Home Plan-500
I've a fantastic and a bit comic problem. U just can't believe, when it rains, i cannot connect. And if some magic happens and it gets connected, then another problem arise i.e. not a single site opens. My sent and recieved bytes becomes as low as 1000 bytes.
I don't think it has any solution. Thanks...

__________
Its actually *10.240.112.195/webLogin.jsp Try this.
 
Last edited:

choudang

Padawan
Re: **Post all your BSNL Dataone Related Queries Here**

I have configured my dataOne connection in Ubuntu and its running very fine.

suddenly, when i switched back to windows and trying to get connected, it says that "the remote computer does not respond". Yesterday, i thought that might be DataOne is somehow goes down. but today, when i started my PC it shows same msg. most imp'ly, it was working fine in windows till day before yesterday.

i noticed that the lights are indicating like "Always On" mode [in linux]. Then i switched back to linux and its working.

What should i do? Because i use my connection in both OS
 

mAYHEM

Journeyman
Re: **Post all your BSNL Dataone Related Queries Here**

gary4gar said:
did u input user id & pass of dataone right??
yup, it connected once the day they activated my account that 2 for just 5 mins.I think there is a problem with my account.
 

gary4gar

GaurishSharma.com
Re: **Post all your BSNL Dataone Related Queries Here**

if the dial up account works fine for u u can add it to system startup so no need of connecting it again & again
 

priyanr

Right off the assembly line
Re: **Post all your BSNL Dataone Related Queries Here**

Configure in bridge mode

Enter vpi: 0
Enter vci: 35
Then apply

Now in WIndows xp->Net work connection-> New-> Broard Band COnnection -->Needs Password->Enter ur username & password

Now connect the newly created connection

You will surely get the INTERNET


You can also configure in pppoe in the sameway (Enter username & password in the router) then you don't have to confugure connection in computer )


mAYHEM said:
Here r the Screenshots
*img145.imageshack.us/img145/8538/nmainfx9.th.png

*img167.imageshack.us/img167/3835/newconnyn1.th.png

*img80.imageshack.us/img80/2213/bridgesd6.th.png

*img214.imageshack.us/img214/6238/advbj3.th.png
 
Re: **Post all your BSNL Dataone Related Queries Here**

Check this trick guys

Go to BSNL Dataone Portal.

Click on gamepackage1 and activate it. Speed increases by 256 kbps

Means UL900 and 500 plans speed increses to 512 kbps

And its confirmed FREE for UL900 plans

+rep guys
 
Top Bottom