** Post all your BSNL Broadband Related Queries Here **
chimera201
Wise Old Owl
So at the end of the month Steam is showing 3.3Mbps as average speed(for last 7 days) for BSNL. Most users aren't getting the speed I guess.
*s19.postimg.org/o7m83cpib/Capture.png
*s19.postimg.org/o7m83cpib/Capture.png
chimera201
Wise Old Owl
Nothing on Railwire from Steam ? Jio and BSNL are equal ?
"Shown below are the average download rates for Steam clients on the most popular Internet Service Providers for India, sorted by the number of bytes delivered to that network."
lovedonator
Ambassador of Buzz
No FUP for this month too.
Sent from my XT1562 using Tapatalk
Sent from my XT1562 using Tapatalk
chimera201
Wise Old Owl
I don't know what you mean by that question. My previous reply was for why no railwire.
THeExcelsior
Broken In
I too received the Happy browsing offer just now. I don't know how but I seem to have crossed more than 10GB today. I barely used the internet today as I had some other work, how could it be possible that I crossed 10gigs today? I didn't even download anything today.
BSNL should just drop the concept of FUP, bring out plans that are tiered on the basis of bandwidth and not fup cap. BSNL can't keep on giving this Happy browsing offer or stop providing 10Mbps either. I'm sure most of who are getting more than 8 Mbps also agree with this. We don't want to go back to previous arrangement, we're spoilt.
sling-shot
Wise Old Owl
The concept of FUP is not bad per se. What is bad is not having proper unlimited plans.
There should be both limited and unlimited plans so that customers may choose according to their needs.
There should be both limited and unlimited plans so that customers may choose according to their needs.
kg11sgbg
Indian Railways - The Vibrant and Moving INDIA
A bit of disagreement,my,Friend.
F.U.P is the most sh!t of all.
Even a network with 8Mbps bandwith without F.U.P will not only attract a large no. of customers,but that would be a jovial experience to use the internet.
sling-shot
Wise Old Owl
Rather than a fixed number, it should be a percentage of maximum attainable volume without FUP. Say 10%.
THeExcelsior
Broken In
By maximum attainable volume without FUP, do you mean the volume of data consumed if theoretically one kept maximizing the utilization non stop for 30 days?
If so, assuming that one opts for an 8Mbps connection and gets 1MB/s downstream bandwidth. Then in one day 84.375Gigs and in a month that would amount to 2.472TB of data. 10% of that might be too little for heavy users.
Having Happy Browsing Offer has spoiled my Dad and I who aren't satisfied with anything less than 1080p on Youtube and 1MB/s in download bandwidth while downloading stuff off the internet. FUP makes no sense in this day and age of Steam, Netflix, Amazon Prime, Soundcloud, Hotstar, huge updates to basically everything from app updates to driver updates and not to mention Windows updates.
sling-shot
Wise Old Owl
That is what I mean. There should be a no-FUP plan for people like you and there should be a reasonable FUP plan for people like me.
(I am happy watching content at 360p/480p on my mobile even with this 10 Mbps connection.)
(I am happy watching content at 360p/480p on my mobile even with this 10 Mbps connection.)
pkkumarcool
Game & anime Lover
So what speed Bsnl users getting after fup nowdays
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
lovedonator
Ambassador of Buzz
Post FUP speed is 2Mbps in most plans but for now there is no FUP, 8/10 Mbps unlimited.
Sent from my XT1562 using Tapatalk
meganin
Right off the assembly line
hi all these forums have finally helped to uncap my downstream from 3.1mbps to 8mbps thanks,but cant reach above 5.6mbps and in idm nothing above 720 kbps,here is my adsl values,please go thru this and guide me what can be done,thanks friends
Mode:ADSL2+ Line Coding:Trellis On Status:No Defect Link Power State:L0 DownstreamUpstreamSNR Margin (dB):22.6 26.7 Attenuation (dB):31.0 18.1 Output Power (dBm):12.3 18.6 Attainable Rate (Kbps):16505 1177 Rate (Kbps):7996 496 MSGc (number of bytes in overhead channel message):61 14 B (number of bytes in Mux Data Frame):110 46 M (number of Mux Data Frames in FEC Data Frame):1 1 T (Mux Data Frames over sync bytes):2 1 R (number of check bytes in FEC Data Frame):16 14 S (ratio of FEC over PMD Data Frame length):0.4783 3.2105 L (number of bits in PMD Data Frame):2124 152 D (interleaver depth):64 8 Delay (msec):7 6 Super Frames:375111 371562 Super Frame Errors:0 269272 RS Words:50264966 3106563 RS Correctable Errors:12617 7602661 RS Uncorrectable Errors:0 N/A HEC Errors:0 1047309 OCD Errors:0 0 LCD Errors:0 0 Total Cells:113343992 2422865018 Data Cells:37207632 2446108395 Bit Errors:0 101599218 Total ES:0 25124865 Total SES:0 25056769 Total UAS:15 24993503
Mode:ADSL2+ Line Coding:Trellis On Status:No Defect Link Power State:L0 DownstreamUpstreamSNR Margin (dB):22.6 26.7 Attenuation (dB):31.0 18.1 Output Power (dBm):12.3 18.6 Attainable Rate (Kbps):16505 1177 Rate (Kbps):7996 496 MSGc (number of bytes in overhead channel message):61 14 B (number of bytes in Mux Data Frame):110 46 M (number of Mux Data Frames in FEC Data Frame):1 1 T (Mux Data Frames over sync bytes):2 1 R (number of check bytes in FEC Data Frame):16 14 S (ratio of FEC over PMD Data Frame length):0.4783 3.2105 L (number of bits in PMD Data Frame):2124 152 D (interleaver depth):64 8 Delay (msec):7 6 Super Frames:375111 371562 Super Frame Errors:0 269272 RS Words:50264966 3106563 RS Correctable Errors:12617 7602661 RS Uncorrectable Errors:0 N/A HEC Errors:0 1047309 OCD Errors:0 0 LCD Errors:0 0 Total Cells:113343992 2422865018 Data Cells:37207632 2446108395 Bit Errors:0 101599218 Total ES:0 25124865 Total SES:0 25056769 Total UAS:15 24993503
sling-shot
Wise Old Owl
Please put that inside CODE /CODE tags to make it readable.
meganin
Right off the assembly line
sory i din get you,how to make tat readable, here i wil put some most asked values,pls see them..
Rate (Kbps):7996 SNR Margin (dB):22.6 26.7 Attenuation (dB):31.0 18.1 Rate (Kbps):7996 496