Overheating problems

[topgear]

@ topgear

I am from Siliguri...next week I have to go Kolkata due to some work..so can u give me the shop's ph number & direction from Sealdah?Also what is the full name of the shop?

M.D. Computer
16/1 Ganesh Chandra Avenue,
Kolkata - 700013 (Near Exide Showroom)
Ph: 2234-6274
2253-7133
9830243212
Contact persons: Mr.Pankaj & Pradeep

From Sealdah - Hire a taxi. Tell Him you want to go to C.R. Avenue - Yogayog Bhavan or Airlines Building. Get Down There & Follow The instructions on the Image. Hope this helps.

*www.harepix.com/images/687739411.jpg

Hi All,

Last Night i removed one of the old 80mm fans which i had attached to my Elite 332 Cabinet, this fan was directly blowing (intake) to the Graphics Card, from few days it etarted making a hell lot of noise when my pc is running. After removing the Fan i could see the idle graphics card temperature be 50C, after Playing Prince of Persia i saw its temperature as 62C, when the fan was there idle temp used to be 43-45 and after playing Games it used to be 55-56. Is this temperature of Graphics Card fine after removing the fan.

The temparature is just fine & is in the safe limit.

Though it's better if the temp stays even lower. Why don't you a attach a new fan.

 

[tkin]

Hi All,

Last Night i removed one of the old 80mm fans which i had attached to my Elite 332 Cabinet, this fan was directly blowing (intake) to the Graphics Card, from few days it etarted making a hell lot of noise when my pc is running. After removing the Fan i could see the idle graphics card temperature be 50C, after Playing Prince of Persia i saw its temperature as 62C, when the fan was there idle temp used to be 43-45 and after playing Games it used to be 55-56. Is this temperature of Graphics Card fine after removing the fan.

Its well within safety limit, but lower is better, a 80mm fan costs 40/-, get a new one.

 

[channabasanna]

Its well within safety limit, but lower is better, a 80mm fan costs 40/-, get a new one.

The one is removed is a old one which had cost me Rs50/- I have a other 80mm fan which i had removed from my old Mercury Kobian cabinet, will try using that. Do we get any Vibration dampener to attach to the fan, so that to avoid the vibrations, i will connect it to the grill which is present to the side of the cabinet, i mean the grill below the chimney of the side panel.

 

[tkin]

The one is removed is a old one which had cost me Rs50/- I have a other 80mm fan which i had removed from my old Mercury Kobian cabinet, will try using that. Do we get any Vibration dampener to attach to the fan, so that to avoid the vibrations, i will connect it to the grill which is present to the side of the cabinet, i mean the grill below the chimney of the side panel.

I don't think something like that exists, if the fan vibrates too much you can buy a new one or try attatching rubber washers.

 

[channabasanna]

While going through eBay i found one of this, *cgi.ebay.in/Vantec-Fan-Vibration-D...3286.c0.m14&_trkparms=66:1|65:1|39:1|240:1318 . I need to know is this available in most of the stores. If so i dont wanna spend 250 Rs for just that rubber kit.

 

[TheLetterD]

Hey how hot can A ZOTAC 9500GT,4850HD GO?

 

[ayuboy]

Hey I am suffering from Serous Overheat Issues. on my Storage PC
My PC P4[515]-90nm 2.93Ghz
My Core Temp reaches 70C at normal workload OMG
Where as My other Component have Temp of 35C~40C like HDD and GPU.
I don't Use this PC to work , just use it for storage. But the fan Noise is irritating.
and After reaching 70C There is am major slowdown in performance.
Where as my other PC with C2D has a Core temp of 40C max- I play games and do all the stuff in this PC and even after 4 Days of Continuous work the Temp never Reaches above 45C.
Does this Indicate any problem with My storage PC?
Do I need to Change the Fans? cause they seem to work fine at 4k+RPM
I have a 80mm Fan at the Exhaust and a large CPU fan which Runs at very high RPm[Forgot Speed].
Please Suggest What do i do.

Thanks

 

[janitha]

Hey I am suffering from Serous Overheat Issues. on my Storage PC
My PC P4[515]-90nm 2.93Ghz
My Core Temp reaches 70C at normal workload OMG
Where as My other Component have Temp of 35C~40C like HDD and GPU.
I don't Use this PC to work , just use it for storage. But the fan Noise is irritating.
and After reaching 70C There is am major slowdown in performance.
Where as my other PC with C2D has a Core temp of 40C max- I play games and do all the stuff in this PC and even after 4 Days of Continuous work the Temp never Reaches above 45C.
Does this Indicate any problem with My storage PC?
Do I need to Change the Fans? cause they seem to work fine at 4k+RPM
I have a 80mm Fan at the Exhaust and a large CPU fan which Runs at very high RPm[Forgot Speed].
Please Suggest What do i do.

Thanks

How do you measure the temperatures?
Remove HSF, clean its contact surface and also processor surface with Isopropyl Alcohol. Apply grain size of MX-2 or AS5 thermal paste on the centre of processor and properly reinstall HSF. Ensure that the cabinet is well ventilated with at least one inlet and two more outlet fans.

 

[ayuboy]

I measure my core Temp and RPM of my Fans from Speedfan Software
Thanks, I'll Try that.

 

[ayuboy]

Yes I fixed everything and now it works fine.
No more noise and CPU temp is 42C normal load and 50C high load.

 

[RMN]

hey guys how is this reading for a Q6600(everything at stock) @idle
room temp was 29-30C
*img4.imageshack.us/img4/3781/78380707zb9.th.jpg

 

[topgear]

Idle temp seems to be OK.

 

[sourishzzz1234]

i have CORE2QUAD q6600 with abit IP35 E my idle temps r around 55C and load temps are 60C what should i do??....can you tell me the cost and procedure of applyin a thermal paste

 

[topgear]

Your idle CPU temp is very high. It should be around 40-45C but load temp is OK.

Get thermal Paste like Arctic Silver 5 or MX. If you don't find them then get Coolermaster Nano.

Here's the instruction :
*www.arcticsilver.com/arctic_silver_instructions.htm

 

[racevthme]

my graphic card idle temp is around 47-48 C {palit ATI RADEON HD 4850 1 GB GDDR3}
is it ok...... my load temperature on running POP-SOT is around 50-52 C ....
Here the room temp is around 25-28 C

I am planning to take this system to pilani{where summer temps exceeds 50 C} ... ne suggestions???

 

[niraj trehan]

well Your must need there will b Air Conditioner in ur room ...for yourself n for our PC

 

[racevthme]

well... ac there is practically not possible...ne other suggestion...room temp will not be 50 ...it will be around 35-38 ...

 

[niraj trehan]

then go for Real big cabinet...ASUS provides u vid them....but at hefty prices if u need real gud 1....Go for 3 Fans....Front,back n one side....apply thermal paste n thats it....u r ready to rock

 

[racevthme]

wats this thermal paste n where to apply it ( )

how much does this thermal paste cost???
is this a safe practice???

 

[topgear]

my graphic card idle temp is around 47-48 C {palit ATI RADEON HD 4850 1 GB GDDR3}
is it ok...... my load temperature on running POP-SOT is around 50-52 C ....
Here the room temp is around 25-28 C

I am planning to take this system to pilani{where summer temps exceeds 50 C} ... ne suggestions???

You gfx card temp is just fine. In summer time your gfx temp will rise upto 55 @ idle & 65-68C under load which is still some good temp.

You don't have to woory about temps......