Basic Guide Purchase a New System

Status
Not open for further replies.

keith_j_snyder2

Rising ApocalypsE
but E2160 performs better or is at par with X2 400+.both procies also cost almost the same (X2 4000+ -> 2.6k & E2160 -> 2.7k).
also E2160 oc's better than X2 4000+.
so ithink its better to buy the E2160 instead of X2 4000+.

So true!
Besides this, i have seen people overclocked their E2160 @ 3.0 GHz on stock cooling.
 

gxsaurav

You gave been GXified
Intel DG33TL motherboard is good, however have a look at DG31PR motherboard just cos it is cheap & provides adequate enough features.

What DG33TL has over DG31PR

1) Support for 8 GB RAM instead of 4 GB. Do u need 8 GB? 4 RAM slots instead of 2

2) 7.1 Channel Audio instead of 5.1 Channel, again do u need it?

3) Support for HDMI & HDCP, but this is irrelevant unless you don't plan to buy a graphics card.

DG31PR seems like a better & balanced buy to me.
 

Pathik

Google Bot
Yep they have started becoming available but are very costly.. If u just want portable storage, get the WD Passport or the Seagate FreeAgent.
 
P

priyadarshi

Guest
hi all!
plz suggest me proc and ram for my intel dg965ry. this board supports upto 2.66ghz E6700 processor.
*processormatch.intel.com/CompDB/SearchResult.aspx?Boardname=dg965ry
and 8gb of ram at DDR2 667 or DDR2 533 and 4gb at DDR2 800
*www.intel.com/support/motherboards/desktop/dg965ry/sb/CS-026602.htm
which one will perform better. 8gb with 667mhz or 4gb with 800mhz.

anyone help me out plz....
 
ab mera kam ka kya hua ?

m2a 692 gdg looks good as a mobo
4000+ looks bad as a proccy
xfx 630i luks bad as a mobo
2140/2160 luks gud as proccy

what to do gentlemen ?
 

nish_higher

Wise Old Owl
BTW whats the price of DG31PR and TL, gx?

DG31PR = 3500
DG33TL=6550


ab mera kam ka kya hua ?

m2a 692 gdg looks good as a mobo
4000+ looks bad as a proccy
xfx 630i luks bad as a mobo
2140/2160 luks gud as proccy
what to do gentlemen ?

*www2.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=I-N73HD&fMTYPE=LGA775

If ur budget can be extended a little get this board.cost=4100 it can be overclocked much better
 
Last edited:
Try to use both the good things if you can!:rolleyes:

(don't misunderstand. just joking)
world is always full of compromises:(
DG31PR = 3500
DG33TL=6550




*www2.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=I-N73HD&fMTYPE=LGA775

If ur budget can be extended a little get this board.cost=4100 it can be overclocked much better
dual channel is not present in it.

and its for a friend, not myself. He is determined to have Dual channel. And if this turns out to be good, I myself might concider buying one. We both have the same current config, thats P4, Intel 915GLVG mobo, and ddr ram. Our mobos have no AGP or PCIe slots, so we both want to upgrade to something that can last till nehalem arrives. I have the patience to keep my current rig and wait, but he wants to go for something that can help him play crysis before marriage :lol:. My patience too is wearing out, so I am also concidering an upgrade. We both want a solution thats as cheap as possible but still works fine. I don't mind OverClocking, and intend to do it to the maximum level that touches the boderline of safety(343.15 Kelvin). And my friend doesn't mind OCing if its done by someone ecept himself, who knows what to do.
 

gxsaurav

You gave been GXified
Cost is always high in lucknow which we have to reduce it by bargaining.

Anyway, I am buying the computer today or tomorrow. Should I go ahead or change something?
 
Status
Not open for further replies.
Top Bottom