Overclocked Phenom X6 1055t

Status
Not open for further replies.

saurabh_1e

teh tech saviour!
I have Overclocked My Phenom X6 1055t to 3.5 ghz

Temp
load 50 c
idle 30 c


before overclocking

load 44 c
idle 28 c


Room Temp :
with a/c 25 c
without a/c 30 c


Are these Temp normal or i should bring back my procy to stock speed.
 

pulsar_swift

Youngling
those temps are fine. Dont worry.

WHat settings did you change to reach 3.5Ghz ? Stock is 2.8Ghz
 
Last edited:
OP
saurabh_1e

saurabh_1e

teh tech saviour!
hw monitor

here tmpin0 goes to 65 c when overclocked
and tmpin2 to 50 c

these are temp of heatsink on the mobo na.
 
Last edited:
OP
saurabh_1e

saurabh_1e

teh tech saviour!
isn't 95 c just too much for phenom x6

and temp after underclocking at2.66ghz
idle
 
Last edited:

rahul.007

bORn To RIse....
Hey guys, seeing so many people tweaking their cpus :), i am thinking of overclocking my 1 month old proccy and gpu(msi-790gx).... but the problem is i dont have an oem hsf and nor do i have the required VITAMINE-M to get a good one like cooler master hyper n520(i recently brought nokia 5230 with whatever bucks i had)....

i am pressurizing on oem hsf cauz my proccy runs at 42'C-44"C(idle) and shoots upto 52"C at full load.... my room temp is around 35'C and i dont have an AC in my room....

so guys, pour in some suggestions for me....

how far can i take my proccy at default stock voltage in the present scenario????

//offtopic//

fu)k these summers <
 

Jripper

Pro/An---tagonist xD
T___T

You are buying a phenom X6 and you are overclocking it...
Damn this world isn't fair. :p

BTW nice overclock mate. :D
 

pulsar_swift

Youngling
Ok its my turn to post the CPU ID hardware monitor values. :p ROOM TEMP = 32 degrees C

See my CPU fan speed. and compare it with stock HSF values posted by RAHUL
 

coderunknown

Retired Forum Mod
Buddy, tell me how to underclock. I want to underclock my 955BE to 2.8GHz and see if there are any drop in temps :wink:

best way to drop temperature is to simply lover the core voltage. your X4 should work fine at 1.25V. or maybe even less. or on other hand, OC it at stock voltage. should reach 3.7-3.8Ghz.

oc'd my cpu to 3.52 GHz at stock voltages and stock cooler :)....

take a look....

I have Overclocked My Phenom X6 1055t to 3.5 ghz

Temp
load 50 c
idle 30 c


before overclocking

load 44 c
idle 28 c


Room Temp :
with a/c 25 c
without a/c 30 c


Are these Temp normal or i should bring back my procy to stock speed.

some sort of OC challenge going on here? :grin:
 

rahul.007

bORn To RIse....
some sort of OC challenge going on here?

hehe :-D me n saurabh are first time oc'rs.... showing some enthusiasm you see.... :)

now, i have oc'd mine to 3.6ghz at stock voltages.... have a look:-
 

coderunknown

Retired Forum Mod
hehe :-D me n saurabh are first time oc'rs.... showing some enthusiasm you see.... :)

now, i have oc'd mine to 3.6ghz at stock voltages.... have a look:-

nice. just keep a check on temperature. posted a couple of tips in the thread you started. do have a look.
 

rahul.007

bORn To RIse....
final results after system stability test(25 mins)-

cpu frequency-3.6 ghz
max temp reached-62'C
min temp-44'C

system is stable.... :)
 

pulsar_swift

Youngling
i should also join the Ocing race ??

---------- Post added at 08:09 AM ---------- Previous post was at 08:07 AM ----------

best way to drop temperature is to simply lover the core voltage. your X4 should work fine at 1.25V. or maybe even less. or on other hand, OC it at stock voltage. should reach 3.7-3.8Ghz.
some sort of OC challenge going on here? :grin:

Bro,

You know the AMD CnQ runs the CPU at 1.025V and multiplier @ 4X at almost all the time.
Yesterday i reduced the multiplier to 14. That makes it 2.8Ghz. But i didn't observe any temperature drop
 

rajan1311

Padawan
all those things make a very small difference in terms of temperature....I have undervolted my QX9650 so much that it runs at a lower voltage at load than at idle !
 

pulsar_swift

Youngling
Ok tell me, my proccy idles at 39, when room temp is 30. How can i bring it down ?
Stock clock speed is 3.2Ghz. I am willing to come down to 2.8Ghz
 
Last edited:
Status
Not open for further replies.
Top Bottom