My 3 Lakh Rig [Low Bandwidth Warning]

[xtremevicky]

EPIC.

Brilliant ! Awesome !

*Closes the tab and Goes back to work *

 

[d6bmg]

I installed my H100 this sunday.. GUYS results are awesome.....

Tell us something about the idle & heavy load temperature that you are getting.

 

[S_V]

EPIC.

Brilliant ! Awesome !

*Closes the tab and Goes back to work *

Thank you......

Tell us something about the idle & heavy load temperature that you are getting.

yepp... I am posting every details and Temps in Overclock...

For Now I updated my Thread with Onkyo HT-S3400 Review, Shots and Settings Video...

Please post your comments and Questions( if any)...

Thank you Guys...

 

[Skud]

How much did the Onkyo cost? And from where did you get it? I hope I haven't missed it.

Edit: OK, got my answer from other post. Really awesome looking. But I am also more treble loving than bass, so this might not suit me too. BTW, I am bit naive about this so asking, can this thing be connected with PC or it works as standalone Home Theatre?

 

[S_V]

I am sorry for not being clear with connections. I am using this unit only wih PC and its very good...
This unit can be used as standalone or with any other source.. this thing got many inputs to be used

 

[S_V]

Due to Limitation of Images in a Message, I can't able to post in the first Page.....

***** MODS .. Any solution please? Atleast Can u please Move this post to 2nd Post, Just right After 1st POST?

Meanwhile,, Please Check here for Corsair H100



Corsair H100 Hydro Series

Rating: 8/10

Previously I gave 7.5 and after testing I must say I should give 8 for this Masterpiece... Remember in my View any product above 6.5 is considered to be a Very Good Product..


Corsair became quite famous in cooling solutions with Hydro Series. These are zero maintenance cooling kit unlike Custom Water cooling where you need to take some extra Care regardless the advantages. I used H70 from Hydro Series for more than a year and I am must say the products are pretty solid and never had any issues. The performance from H70 is outstanding and never disappointed me in going for heavy overclock. Lets see the gallery of H100 which Contains unboxing, Preparing and Installation in PC...

UnBoxing:

As usual Solid Boxing from Corsair... Total eye Candy.
*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/1.jpg

Professional Packing and safe for any kind of Transportation
*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/2.jpg

Two 120mm Corsair Fans... Specs says around 65 CFM at 38dba
*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/3.jpg

Out of the Box
*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/4.jpg

Total Kit of H100
*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/5.jpg

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/6.jpg

H100 Pump as well as Fan controller
*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/7.jpg

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/8.jpg

Thermal Grease pre-applied, Probable Shintsu Paste
*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/11.jpg



240mm Rad cooling fins
*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/9.jpg

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/10.jpg



Preparations

As usual we need to Remove previous Cooling solution.. I sold my H70 on the day I purchased H100 and due to lack of time to install H100 I had to use stock cooling meanwhile. So here it is...

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/1-1.jpg

Seriously Intel Stock cooling for SB is worst solution ever given by Intel with their processors... It easily goes to 70c + for just serious gaming or Multi-Tasking. Anyhow we need to clean that Paste came with Stock and us usual my two little boys will come into play....

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/2-1.jpg


See Told you... they does the Job very well.. Just pour couple of drops from 1 Solution and wipe it for after 30 seconds using soft cloth and good Tissue paper then use Second Solution for another 30 secs and wipe it. Remember left out thermal paste will mix with new Thermal Grease resulting ODD results.

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/3-1.jpg


As usual Preparing Rad with 120mm Fans... I want you Guys to check the Different Pictures of RAD with Four Fans...so please view the other shots too...

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/4-1.jpg

Side View..

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/5-1.jpg

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/6-1.jpg

It's not so Bulky when compared to Custom cooling Rads...

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/7-1.jpg

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/8-1.jpg

*img.photobucket.com/albums/v358/sunil_9/Corsair%20H100%20Unboxing/Watermark/9-1.jpg


Installation:

lets put motherboard in the cabinet first... I cleaned my PC also... (It took almost full daytime for me to put things back after Cleaning......

*img.photobucket.com/albums/v358/sunil_9/CorsairH100assembling/WaterMark/10.jpg

Place the Back Plate and align them with 1155 socket size and this side use the screws came with H100 to Hold the Back Plate..
*img.photobucket.com/albums/v358/sunil_9/CorsairH100assembling/WaterMark/11.jpg

Installed the H100 Rad on Top...
*img.photobucket.com/albums/v358/sunil_9/CorsairH100assembling/WaterMark/12.jpg

The space between My Mobo and Rad is so much that I don't have to worry about Cable Management. Thanks to Corsair 800D...

*img.photobucket.com/albums/v358/sunil_9/CorsairH100assembling/WaterMark/13.jpg


Just place the Pump on the screws shown in second Picture and Tight Them in the sequence of 1,3 and 2,4 corners for good contact between Processor and Pump.

*img.photobucket.com/albums/v358/sunil_9/CorsairH100assembling/WaterMark/14.jpg


Finally Done and Ready to Test........
*img.photobucket.com/albums/v358/sunil_9/CorsairH100assembling/WaterMark/15.jpg

*img.photobucket.com/albums/v358/sunil_9/CorsairH100assembling/WaterMark/Untitled-1.jpg


Temp's Roundup:

*******Uploading Videos and Shots.... Thank you.....

After installing H100, I overclocked my i7 to 4.5 and 4.8GHZ and Both Overclocking Results are Awesome and Quite Happy with Temps. Especially with 4.8GHZ and I waned to check H100 performance so I did use little Over Volts than necessary for 4.8 GHZ. For 4.5 Overclock the results are piece of cake for H100... Please go through the videos for now and this evening I am going to post screenshots. Ignore my worst commentary in Videos...

For normal usage and especially for Heavy Gaming , the Temps never crossed 58c at 4.8GHZ @ 1.44v. so it's look like 4.8 for Normal usage is a piece of cake for H100...

1. Overclock Temps with 4.5GHZ

Ran stress softwares for 1 hour to check the Stability and the Room temp is 25c. Running LinX for Second Time and Corsair H100 is in Medium Fan settings.. Corsair is Very calm in Low fan setting and Ok in medium and Loud in High Mode.. In LinX I am using Problem size of 25000 and allowed the test to run for 5 Times...

[YOUTUBE]Ijlfejk37Ro[/YOUTUBE]


2. Overclock Temps with 4.8GHZ

To run my Chip at 4.8GHZ 1.38-1.40 is enough to pass all Stress Softwares But I want to check my H100 performance. so I used 1.44 with PLL over voltage enabled. Trust me Guys Volts like this will make your Chip to emit more than normal and H100 did cope up very well.

[YOUTUBE]Wci1osbQC6k[/YOUTUBE]


3.CineBench 11.5 Benchmark Temps with 4.8GHZ @ 1.445 Vcore..

The score is very impressive. Please anyone who are using i7 above 4.5 GHZ OC, Please do tell me the difference in score.
Remember Cinebench 11.5 makes your Processor to run very hard and Bends it's knee if it is not stable...

[YOUTUBE]cdIYUEP3zuE[/YOUTUBE]

 

[Skud]

Your pics are awesome as always.

OT: you haven't answered my PM yet.

 

[S_V]

Thanks Skud...

PM? Please let me check now

 

[ajayritik]

Bhaiyya yeh rig dekhne ke liye kuch ticket lagao ge kya?

 

[techbulb]

This rig is awesome man ,it can kill any game thrown at it . congrats

Nice rig... Congrats man....

And India is still a poor country...

Thank god that you can afford all this...

hey man india is a poor country but its people are not poor and this 3lac rig is the proof.

 

[d6bmg]

@S_V: nice & clean review of H100.
P.S. what is the street price of that ArctiClean Thermal Material Remover & Surface Purifier??
At e-bay it's listed as 550/-

 

[Jaskanwar Singh]

just AWESOME. Congrats S_V

 

[avichandana20000]

PHATAPHATI.(bengali) words are incapable to describe my feelings. Simply proud to be a digitian and my eyes are blessed . Bhai, if i ever be in hyderabad would u pls pls allow me to see this in my naked eye. just want to touch the rig and my birth as a human will be justified.

 

[S_V]

**** Updated Videos of Overlock TEMPS with H100... Please check back my Corsair H100 Post or Click here

This rig is awesome man ,it can kill any game thrown at it . congrats

hey man india is a poor country but its people are not poor and this 3lac rig is the proof.

Thanks Techbulb....

I am not Rich man .. It's just I am crazy enough to Buy every Month from Salary to fulfill my check list.

@S_V: nice & clean review of H100.
P.S. what is the street price of that ArctiClean Thermal Material Remover & Surface Purifier??
At e-bay it's listed as 550/-

Thanks d6bmg... I purchased from ebay for 250/- with Coupon of 100 at that time. so it's 360 at that time...

just AWESOME. Congrats S_V

Thank you Jaskanwar..

PHATAPHATI.(bengali) words are incapable to describe my feelings. Simply proud to be a digitian and my eyes are blessed . Bhai, if i ever be in hyderabad would u pls pls allow me to see this in my naked eye. just want to touch the rig and my birth as a human will be justified.

You are welcome mate.. Just PM me if you really Visit Hyderabad....
Thanks so much for your Cool comment...


========================================================================
Finally I am able to Post Full Configured Rig in Main Page... with these Images....

Soon will post all the Gallery....

*img.photobucket.com/albums/v358/sunil_9/1-7.jpg
*img.photobucket.com/albums/v358/sunil_9/2-6.jpg
*img.photobucket.com/albums/v358/sunil_9/3-4.jpg​

 

[d3p]

Apart from the other stuffs like SLI, H100 or even the Cabinet, the main thing that drives me crazy is the Cable Management.

I can understand, the time you would have spend to get it right.

Awesome work, buddy.....Just Awesome.

 

[MyGeekTips]

 

[Skud]

One thing i want to ask is ..... this PSU HX850 ... is it a Modular PSU .. ???
Also I have to admit, the cabinet is super cool ....

It's modular.

 

[S_V]

One thing i want to ask is ..... this PSU HX850 ... is it a Modular PSU .. ???
Also I have to admit, the cabinet is super cool ....

Yes, it is Modular PSU...

Thanks too....

Apart from the other stuffs like SLI, H100 or even the Cabinet, the main thing that drives me crazy is the Cable Management.

I can understand, the time you would have spend to get it right.

Awesome work, buddy.....Just Awesome.

Thanks mate... Behind the Scene....

*img.photobucket.com/albums/v358/sunil_9/4-2.jpg

 

[d3p]

One thing i want to ask is ..... this PSU HX850 ... is it a Modular PSU .. ???
Also I have to admit, the cabinet is super cool ....

Corsair HX850 is not a Fully modular PSU unlike AX850. Rather than calling HX850 a Modular PSU, i would call a Semi Modular PSU.

Refer the below Pics.

*www.corsair.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/h/x/hx850_angled_1.png

*www.corsair.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/a/x/ax850-angled_1.png

In HX850 the 24 Pin ATX Power Connector is permanent, whereas AX850 can be detached.

 

[S_V]

yeah... Precisely you are Right but 24pin and 6pin will be anyhow used for Mobo and Vid card.

EDIT: It's 8 pin CPU not 6pin of Vid card.. I was thinking something else while typing...