2 beeps from motherboard when switched on

[omega44-xt]

2 Problems

Today when i tried to switch on my PC, it started smoothly with no display but i could here fan's rotation sound.
Usually when my PC starts 2 beep sounds come from my motherboard with a time interval of 2 sec between them. But i heard only one beep. Then when i pressed the reset button , the same problem . Then i pressed the switch on button (not for 5 sec just pressed it 7 removed my hand) & my PC turned off. Then i switched off my UPS & removed it from power source. After sometime i switched on my PC & it started without any problem.

Why earlier the problem occured ?

Yesterday while playing Just Cause 2 (in max settings) for continuously 1 hour, my PC's screen turned black & this screen appeared....

And then my PC restarted automatically. It also happened earlier while playing GTA 4. What could be the reason for this problem ?

 

[omega44-xt]

2 Problems !!

Today when i tried to switch on my PC, it started smoothly with no display but i could here fan's rotation sound.
Usually when my PC starts 2 beep sounds come from my motherboard with a time interval of 2 sec between them. But i heard only one beep. Then when i pressed the reset button , the same problem . Then i pressed the switch on button (not for 5 sec just pressed it & removed my hand) & my PC turned off. Then i switched off my UPS & removed it from power source. After sometime i switched on my PC & it started without any problem.

Why earlier the problem occured ?

Yesterday while playing Just Cause 2 (in max settings) for continuously 1 hour, my PC's screen turned black & this screen appeared....

And then my PC restarted automatically. It also happened earlier while playing GTA 4. What could be the reason for this problem ?

 

[d3p]

Re: 2 Problems !!

Check the HDD for any badsectors !....

probably thats the reason. Can you post the error image in image shack or photo bucket, its not accessible.

 

[omega44-xt]

Re: 2 Problems !!

I've nvr used imageshack

 

[asingh]

Re: 2 Problems !!

You would get some dump files. Post last three on a file share server, give us the link.

 

[omega44-xt]

Re: 2 Problems !!

^^
Where 2 get that ?

 

[motobuntu]

Re: 2 Problems !!

This error may occur when some device driver tries to access wrong memory address. It may be due to bad RAM or corrupt drivers.
Check your RAM using some memory diagnostic utility like memtest86+ and update your drivers from the manufacturer's website.

I hope this will help.

 

[asingh]

Re: 2 Problems !!

Error dumps:
C:\windows\memory dumps

 

[Zangetsu]

Re: 2 Problems !!

@anupam_pb : cud be a RAM problem.

 

[abhidev]

Re: 2 Problems !!

remove RAM, clean them and place them back....i had faced the same problem...and this solved the issue...

 

[omega44-xt]

Re: 2 Problems !!

The blue screen thing again happened while playing just cause 2. But this time 1 minute before d blue screen came, a dialog box came giving me warning that i'm goin low of memory & asking me 2 close just cause 2.

For memory dump files : (only 4 in my PC so uploaded all)
Free File Hosting Made Simple - MediaFire

Any solution 2 PC's starting problem ? It happenend to me 2 months ago also....

 

[Piyush]

Re: 2 Problems !!

did u do anything in BIOS settings?

 

[omega44-xt]

Re: 2 Problems !!

Nvr touched BIOS bt i overclocked my GPU bt after returning it to factory settings also d problem existed

 

[Piyush]

Re: 2 Problems !!

ur monitor is alright ...right?
i mean r u sure its not the problem of ur monitor?

meanwhile just try to reset ur jumper pins on the motherboard
might solve the problem

 

[omega44-xt]

Re: 2 Problems !!

^^which jumpers ?
I'm sure its not monitor's fault

 

[asingh]

Re: 2 Problems !!

^^
Basically reset the CMOS. Just google it out.

Will look at your dumps once I get free from office. Tkin...?

 

[Piyush]

Re: 2 Problems !!

actually thee are 3 small pins connected on each other on the mobo
they are usually placed at the corners or borders

Answers.com - Where is the bios reset jumper

just google for the location of jumper pins

 

[Faun]

Re: 2 Problems !!

Or remove the mobo battery and replace it to reset CMOS.

 

[d3p]

Re: 2 Problems !!

Refer this product guide for more details about CMOS reset or jumper reset.

http://downloadmirror.intel.com/18505/eng/DH55TC_ProductGuide01_English.pdf

 

[ajai5777]

Re: 2 Problems !!

I have seen this msgs when I tried to overclock my proccy.This issue might be of the momory.Use cpu z and ensure that the rams are running in proper frequency and timings.