coderunknown
Retired Forum Mod
I'll install void delta after I return home. Yesterday removed almost all of lg crapwares. But mobile became quite slow & buggy. Tried download nessyrom but download failed almost everytiime.
@androidfan
which rom u using?
The problem u mentioned happens in GB rom...else it cud be due to the partitioning like sam said. Relax...dont wrry.also if u using a cover make sure...the proximity sensor is not covered.
Now do try this
firstly backup all ur data, reboot into recovery and partition and wipe everything, flash void #echo. run ur phone for a week or so and see if the problem occurs again...if it does only then get ur phone back to factory setting and original rom and go to lg service,else nothing to worry abt... lifes good![]()
Using void for a couple hours now. Smooth & bugfree. But till now market hanged once & thats it. But void came with all the default language packs. unnecessary wastage of memory.
@androidfan, just bench it. But most important have you overclocked the phone?
Yes, I have overclocked the phone.
I am setting the clock frequency back to 600 MHz and testing using SD Tools... Is there a better app that I might use?
Using SD Tools and Clock Speed 600 Mhz
Write Speed: 5.5 MB/s
Read Speed: 23 MB/s
What is the SD card problem everyone on the forum is talking about? Is that what might have caused my phone to "sort-of" shut down and not start until I removed the battery?
I have forgotten the app name. I'll test my card also tonight. Btw what modules are you using? Cause the answer to the problem may lie within these.
from my experience its either the overclock or you shifted cache to memory card also. run mobile on stock speed for 3-4 days. I'll run my mobile on stock speed. Here the weather doesn't allows such tweaks.
void. kernel-module (optional)
Based on the source released by drellisdee and AnyKernel Updater by Koush (buy them cookies)
Recompiled it in order to accept intermediate frequencies
Will be clocked at 730Mhz / interactive governor as default (recommended)
void. a2sd/d2sd-module (optional)
Based on DarkTremor's a2sd script
Will not only do a2sd but also move the dalvik-cache to the SDcard through an init script I've written
@sam and @androidfan
Im using the following modules currently
a2sd
gapps
gingerbread
hwacc
tapps
Im using a sandisk class4 8gb microsd card and am having no problems watsoever. no hanging with swype, apps run well, ui is fast.
infact my write speed was only 4.5MB/s acc to sd tools read arnd 39MB/s and I do overclock while playing games.
Which version of dressidles custom recovery u guys using? Im still using v1.1. Ive heard tht the latest version of custom recovery ie 1.2.1 has caused some probs for a few ppl at xda forums. Im not sure...just guessing. Should not actually matter once u have successfully flashed the rom,but it could be that the ext partition is not being created properly by v1.2.1 of custom recovery
PS. use h2testw to test ur card on PC. reliable and also tells if card is genuine
@sam and @androidfan
Im using the following modules currently
a2sd
gapps
gingerbread
hwacc
tapps
Im using a sandisk class4 8gb microsd card and am having no problems watsoever. no hanging with swype, apps run well, ui is fast.
infact my write speed was only 4.5MB/s acc to sd tools read arnd 39MB/s and I do overclock while playing games.
Which version of dressidles custom recovery u guys using? Im still using v1.1. Ive heard tht the latest version of custom recovery ie 1.2.1 has caused some probs for a few ppl at xda forums. Im not sure...just guessing. Should not actually matter once u have successfully flashed the rom,but it could be that the ext partition is not being created properly by v1.2.1 of custom recovery
PS. use h2testw to test ur card on PC. reliable and also tells if card is genuine
Also, originally, my SD card was 2 GB (came with the phone). I created 512 MB ext2 partition, then converted to ext3 and then to ext4.
So, the remaining capacity should be 1.5 GB. But it is showing only 931 MB total capacity... in Windows as well as through Settings >> SD Card & phone storage
Cheers!
without app2sd tweak, is there any use of the ext partitions? cause most apps will get installed in mobile.
Used h2testw (windows based program). My results...
Writing speed: 2.72 MByte/s
Reading speed: 9.96 MByte/s
My custom recovery version is 1.1 -- recovery-RA-GNM-thunderg-1.1.0.img
I have clocked down to 600 MHz. Lets see if the problem crops up again... Then I will really panic...
Also, originally, my SD card was 2 GB (came with the phone). I created 512 MB ext2 partition, then converted to ext3 and then to ext4. So, the remaining capacity should be 1.5 GB. But it is showing only 931 MB total capacity... in Windows as well as through Settings >> SD Card & phone storage
Cheers!
WAIT. did you wiped the ext partition when you 1st tried void? cause i have a feeling that your card is taking space of 2 ext partitions.
the latest version of swype is not working on my phone. firmware version 2.2 v10b
without app2sd tweak, is there any use of the ext partitions? cause most apps will get installed in mobile.
WAIT. did you wiped the ext partition when you 1st tried void? cause i have a feeling that your card is taking space of 2 ext partitions.
Reformat and repartition your card using recovery ... The speeds are ok but not great ... try to keep your core apps on your phone memory ... like Launcher, keyboard, custom dialer etc ..
when you wipe, you are just formatting the contents of the ext partition only ... it does not delete the partition ....
and u cannot create two ext partitions using custom recovery ...
no ...
you can move most apps from Phone Memory to SD Card ... So app2sd is not a must ...
the latest version of swype is not working on my phone. firmware version 2.2 v10b
Most of my apps are installed on SD card... Void handles this automatically...
Sam, you have also used your stock 2GB card for installing Void. How much is your total SD card capacity now?
If I reformat and repartition the SD card, should I convert it to ext3 only? Also, will I lose Nandroid?
Search for SWYPE HVGA
If I reformat and repartition the SD card, should I convert it to ext3 only? Also, will I lose Nandroid? I have kept a copy of my backed-up Nandroid folder on my PC. Can I recover all data if after reformatting, I copy backups back to Nandroid folder and then restore?
Or would I have to reflash Void?
Cheers!
how? i mean manually or using some other script?