Installed the N620 yesterday and immediately my crappy cabby gives up. The cooler protrudes out of the cabby so I can't close my side panel. Time to buy a new cabby.
For now, here's the pics:-
GENERAL PICS
*farm6.static.flickr.com/5265/5639337411_fbbaf712bb_b.jpg
The Cooler Mounted. Its pretty "towering".
*farm6.static.flickr.com/5187/5639337571_b1ca1172e9_b.jpg
Cooler Installed. There's very little gap between the cooler and the SMPS and also the rear fan. RAM, Northbridge heatsink and Graphics Card stay clear though.
*farm6.static.flickr.com/5261/5639911704_55ef5520ed_b.jpg
You can see the cooler protruding out of the case.
World in blue and black
*farm6.static.flickr.com/5101/5639911484_ff62985386_b.jpg
*farm6.static.flickr.com/5142/5639337707_ddc72334f5_b.jpg
*farm6.static.flickr.com/5224/5639911612_0d20a9127f_b.jpg
*farm6.static.flickr.com/5190/5639911752_3216f24429_b.jpg
Temperature Readings
*farm6.static.flickr.com/5269/5639337061_97c9c32f66_b.jpg *farm6.static.flickr.com/5261/5639911088_28a7b821b6_b.jpg
*farm6.static.flickr.com/5182/5639337101_bb72d901e3_b.jpg *farm6.static.flickr.com/5146/5639911138_712ec70a5a_b.jpg
In each of the above sets, the first one is on stock cooler and the second one in on N620. You can see an idle temperature drop of 2-3 degress, wehreas under load there's a drop of 6-10 degrees. Once I upgrade my cabby to one with good airflow, these readings should drop further. Overall, satisfactory product.