keith_j_snyder2
Rising ApocalypsE
^ Read my last post!
Overheating problems
- Thread starter john_the_ultimate
- Start date
-
- Tags
- admins overheating problems thread topic
linux_ubuntu
iL6>Tushar
If you assebled own then check heat sink sitted properly on CPU, there should be no gap otherwise air bubbles bad conductor reinstall your heat sink use nice heat sink like zalman, thermalright with arctic silver thermal mass. use coretemp for temprature readings installing heat sink require skill me too installed thermalright ultra 120 extreme two times lol
vinaysshenoy
Right off the assembly line
I have an Intel C2D E6320 processor on an intel DG965 Motherboard with a stock intel cooler. I use core temp. to get the temp. readings for the CPU. It is running at 1.325 V and the idle temps for the cores are around 51-53 degree celsius after running for abt 2 hours. Is this normal temperature or is it overheating?
P
paranj
Guest
nope i think its quite normal
OP
john_the_ultimate
No pain....No gain
@bikdel
Try this *extreme.outervision.com/psucalculatorlite.jsp
Try this *extreme.outervision.com/psucalculatorlite.jsp
RexRazr
Broken In
HELP!
my cpu (AMD Athlon X2 6000+) fan isn't speeding up automatically (neither manually) after i upgraded my pc today. the cpu now is in a msi k9agm4 motherboard. i also have an xfx 8800gt alpha dog installed which's temp is around 54 degree C in idle. but gfx card isn't the problem.
my cpu's temp is goin high and high in no time right after i start a game or something. 70, 80 and more even. but my cpu fan is always around just 1050 rpm. tried the option of cpu fan speed overriding in BIOS...but no work. also enabled and disabled cool'n'quiet several times...but nothing
i've also installed a cooler master extreme duo 600 watts psu.
but instead of getting a cool machine...pff
PLEASE HELP ME SOON...anyone
my cpu (AMD Athlon X2 6000+) fan isn't speeding up automatically (neither manually) after i upgraded my pc today. the cpu now is in a msi k9agm4 motherboard. i also have an xfx 8800gt alpha dog installed which's temp is around 54 degree C in idle. but gfx card isn't the problem.
my cpu's temp is goin high and high in no time right after i start a game or something. 70, 80 and more even. but my cpu fan is always around just 1050 rpm. tried the option of cpu fan speed overriding in BIOS...but no work. also enabled and disabled cool'n'quiet several times...but nothing
i've also installed a cooler master extreme duo 600 watts psu.
but instead of getting a cool machine...pff
PLEASE HELP ME SOON...anyone
johnjjx
Ambassador of Buzz
^^hav u disabled cool n quiet frm bios?
@slyfox 1k is very low rpm fr ur cooler. Try disablin speed step frm bios. Even smetimes applyin mre of TIM increase temps.
^^it often happens in x2 coolers with sme boards. Same cooler on older cpu works at higher rpms
@slyfox 1k is very low rpm fr ur cooler. Try disablin speed step frm bios. Even smetimes applyin mre of TIM increase temps.
@slyfox 1k is very low rpm fr ur cooler. Try disablin speed step frm bios. Even smetimes applyin mre of TIM increase temps.
^^it often happens in x2 coolers with sme boards. Same cooler on older cpu works at higher rpms
@slyfox 1k is very low rpm fr ur cooler. Try disablin speed step frm bios. Even smetimes applyin mre of TIM increase temps.
Last edited:
RexRazr
Broken In
yes i disabled cool'n'quiet from bios too...but no improvement (still having around 1000-1050 rpm).
can a custom cpu cooler (instead of the amd's) take away this problem? where does the fan speed controller censor stay...on the motherboard or on the fan itself?
pls answer me soon...thanks
can a custom cpu cooler (instead of the amd's) take away this problem? where does the fan speed controller censor stay...on the motherboard or on the fan itself?
pls answer me soon...thanks
linux_ubuntu
iL6>Tushar
go for NZXT cabinet nice airflow with great looks check www.theitdepot.com, Join www.erodov.com if you can :
)better if you can buy Thermalright Ultra 120 Extreme heat sink and arctic cooler MX-2 it will drop down your temp upto 8 to 10'c
Last edited:
anshulkumar
Right off the assembly line
Hi!!
I have Intel P-D, 3.0 GHz, with 2 Gb Ram. andMotherboard Intel 945. As i switch on my Pc my Pc temperature start from 53º and it keep in increasing. when i work on some 3D software n when i do rendering its show me a message yr temperature exceed. and it go around 71º and above, n after some time pc get off by it self?
Pls Help me out as i m not able to carry on with my work n animation.!!
I have Intel P-D, 3.0 GHz, with 2 Gb Ram. andMotherboard Intel 945. As i switch on my Pc my Pc temperature start from 53º and it keep in increasing. when i work on some 3D software n when i do rendering its show me a message yr temperature exceed. and it go around 71º and above, n after some time pc get off by it self?
Pls Help me out as i m not able to carry on with my work n animation.!!
channabasanna
In the zone
Hi,
I have a notebook,
model: hp530 with:
Intel Core Duo,
T2300@1.66GHz,
980 MHz, 1GB Ram.
Problem is sometimes it heats up considerably and shuts down by itself. This happens mostly when I was playing games (FIFA 2008). How do i overcome this issue? Anyone?
I have a notebook,
model: hp530 with:
Intel Core Duo,
T2300@1.66GHz,
980 MHz, 1GB Ram.
Problem is sometimes it heats up considerably and shuts down by itself. This happens mostly when I was playing games (FIFA 2008). How do i overcome this issue? Anyone?
infra_red_dude
Wire muncher!
MX2 is good. Don't buy the normal Arctic silver or Cooler Master Nano. They are not that effective. BTW, after changing the HSF are you using the same old thermal pad???