Overheating problems

ithehappy

ithehappy

Human Spambot
Yes a hole would be much preferable to me instead of popping out the whole Mobo to install the back plate. I don't know if 430 has enough space to install the back plate or not but mine certainly don't.
 
topgear

topgear

Super Moderator
Staff member
^^ Your CPU core temps are though on Higher side still within safe limits but your cputin (cpu case case temp ) is too much high though it may be a wrong reading but 121C ( max your cpu is around 72C ) is not a normal temp anyway - can you reinstall your HSF with a fresh layer of new TiM or get a new cooler. BTW, did you OCed the cpu anyway

quad_core said:
^^ +1.. I know elite 430 has a hole where the processor is mounted.. but is that enough?I have read in reviews that one needs to take the motherboard out for installing n520. Also, , the n520 n n620, have 2 fans, so can these be installed in elite430 without touching the side panel or the top ?
Click to expand...

I've found that hole to be enough though you may need someone while installing - ask your family member or your buddy to hold the cooler while you are going to tighten the screws.

I've installed Hyper 212 ( even with two fans ) and that's not a small cooler by any means - if you are going to install Hyper N520 on a AMD mobo you may not able to install a top case fan ( same happened with hyper 212 ) but if you don't want to experiment too much and still want some good cooler get the Hyper 212+
 
Last edited:
quad_core

quad_core

CyberdyneSystems Model101
topgear said:
I've found that hole to be enough though you may need someone while installing - ask your family member or your buddy to hold the cooler while you are going to tighten the screws.

I've installed Hyper 212 ( even with two fans ) and that's not a small cooler by any means - if you are going to install Hyper N520 on a AMD mobo you may not able to install a top case fan ( same happened with hyper 212 ) but if you don't want to experiment too much and still want some good cooler get the Hyper 212+
Click to expand...


Thanks for the reply . I saw your cabby pics of elite 430 + cm 212, and i saw that the cooler is pretty much big, and to avoid doing and R & D or experiment, i will not go for n620 or n520.

So , i would like to ask you one more query, how much difference did you notice after installing hyper 212?? My Phenom ll 955be reaches to 62degress, and i expect atleast 10-12 degress less when i install this hyper 212+( at full load )
 
MegaMind

MegaMind

Human Spambot
topgear said:
^^ Your CPU core temps are though on Higher side still within safe limits but your cputin (cpu case case temp ) is too much high though it may be a wrong reading but 121C ( max your cpu is around 72C ) is not a normal temp anyway - can you reinstall your HSF with a fresh layer of new TiM or get a new cooler. BTW, did you OCed the cpu anyway
Click to expand...

I havnt OCed...
I cleaned the HSF n applied TIM on 20th march(4 days ago) only
Actually wat is CPUTIN, can u explain?

Any more suggestions??
 
CA50

CA50

Cyborg Agent
@mailme.manju, CPUTIN is the cpu temps, its way to high even your system temps are high, is your system well ventilated?
 
asingh

asingh

Aspiring Novelist
^^
False for sure. What is CPUTIN...? Could not find any thing substantial on it. My version of HW Monitor does not even show it.
 
topgear

topgear

Super Moderator
Staff member
quad_core said:
Thanks for the reply . I saw your cabby pics of elite 430 + cm 212, and i saw that the cooler is pretty much big, and to avoid doing and R & D or experiment, i will not go for n620 or n520.

So , i would like to ask you one more query, how much difference did you notice after installing hyper 212?? My Phenom ll 955be reaches to 62degress, and i expect atleast 10-12 degress less when i install this hyper 212+( at full load )
Click to expand...

I've not used the stock cooler from the very beginning and with stock speed of 2.8 Ghz idle temp is around 28C and temp never crossed 40C ( ambient temp is around 32C ).

mailme.manju said:
I havnt OCed...
I cleaned the HSF n applied TIM on 20th march(4 days ago) only
Actually wat is CPUTIN, can u explain?
Any more suggestions??
Click to expand...

Intel CPUs have two type of temps :

One is Cpu core temp ( also known as Tjmax temp ) and your cpu showing it as 69, 61, 65, 66 ( which has shut off point of 100C ).

Another temp is called cpu case temp ( tcase or some monitoring app may show it as cputin ) - it's the temp of your cpus heat spreader and your cpus highest tcase temp is ~72c.

Now monitoring apps may be wrong while showing temps - so it's best use some another cpu temp monitoring ap like everest and post a screenshot here.

BTw, what cpu TiM you have used ?
 
CA50

CA50

Cyborg Agent
is there any temp monitoring software without and issue and gives the most accurate temps reading ??
 
CA50

CA50

Cyborg Agent
^i am using real temp, it is showing temps as 49C, is it hot? Everest shows it as 42C, why is this difference?
 
asingh

asingh

Aspiring Novelist
^^
What sensor is Everest Lavalys picking..? It has to be set.

Both are fine...the temperatures though.
 
You must log in or register to reply here.
Top Bottom