Dataone Automation (The Comprehensive Guide)

[gary4gar]

There is one catch.
How do u switch CPE off.
It has to be switched off for it to work

what is CPE????
@yrana2002
nice one
i will add to ur repute

 

[adityaksharma]

the thing is tht you have to connect at 2 am or later for this to work so how do i set up my modem to turn on at two.... i dont use a dialer i use simple plug it in the lan and then assign an ip method..... so if the modem is turned on the billing will continue form the earlier session and i will b billed for it.....
bsnl has clarified that for free time to work u must login b/w 2 am to 8 am..... thus..... unless someone tell me how do i configure a pppoe connection or tell me hw to turn the modem on automatically ....... because this will only be possible then....... and if u figure that out then quite obviously........ happy hours!!!!

 

[yrana2002]

so if the modem is turned on the billing will continue form the earlier session and i will b billed for it.....
bsnl has clarified that for free time to work u must login b/w 2 am to 8 am....

Well, that is not true. If you have ventured properly in the BSNL sticky in the General Forum, then you will realize.

It has never happened to me in the past 7 months of my usage. Your account counter stops as soon as 2:00AM is reached and starts at 8:00AM.
Whatever you do between this period is irrelevant.

However, if you still dont trust anybody , then see this link on how to set up a PPPoE connection:
Setting up a PPoE

An Alternative that i use for my safety is use AutoHotkey to create scripts that automatically enable disable LAN at a specified time.
AutoHotKey was introduced in the Digit CD this time.
Go to Help for options on how to create such a script. If you dont understand it, then request here and i will post the method.

Savvy

 

[jack// ani]

Well, that is not true. If you have ventured properly in the BSNL sticky in the General Forum, then you will realize.

It has never happened to me in the past 7 months of my usage. Your account counter stops as soon as 2:00AM is reached and starts at 8:00AM.
Whatever you do between this period is irrelevant.

Savvy

yes...there is no billing during 2am - 8am, and its also dosen't matter when you did your login, say you logged at 1am and logged out at 9am, then you will only be charge for *2 hours* your *6 hour* is still free......so enjoy!!!

ShaPlus....dataone bandwith usage finder nicely extracts out overlapped period, just because it really free!!!! And nobody....ever faced probelm or complained about it!!!

 

[PinKLip]

Of course, its worked for me, thats the reason i posted this tutorial.

I have already mentioned. Those who dont have this Auto-power on facilitated BIOS, this method may not work for them.
They should try to put the pc on Standby rather than Shut it Down and use a program to wake it up on a scheduled time while the rest of the procedure follows the same pattern.

Savvy

Thanks yarana,
I will try this as soon as i get H500 plan. My BIOS does not have auto power facilities, is there any 3rd party app to do it?

use a program to wake it up on a scheduled time while the rest of the procedure follows the same pattern.

what app can be used ???
Btw what is your dataone plan ??

 

[yrana2002]

If you dont have any Auto-On option in your BIOS, then you cannot shutdown your PC. You will have to omit that step.

Instead, you will have to put your PC on standby.

Now, there are two steps you can do to get the rest of the processes going.

a) Using Task Schedular:

• Go to Start->Programs->Accessories->Task Schedular
  
• Select the task that runs the earliest during our process, for example, Bitcomet in my case.
  
• Right click the task->Select Properties
  
• Go to Settings Tab and check Wake the Computer to Run This Task.

So, from now on, just put your computer on standby, and let everything else work on its own.

b) Using Third-Party Software.

There's nothing much to expain in this method. All you have to do is get a software for waking your pc on a scheduled time such as Auto Power-on and Shut-down 2.
Just configure the settings as required and your PC is ready to enjoy the Happy Hours

Btw what is your dataone plan ??

I have a Home500 Plan and i'm very happy with it

Savvy

 

[PinKLip]

Thanks yarana.
You have given a nice tutorials
Regards
PinKLip

 

[tinku dhar]

hey m8,,,

can u tell me wats the main use of the tutorial ???????????

if possible in short man wats the use of this in dataone

regards

 

[mayhbp]

finally i dont need it now switched to ul plan thank god no more sleepless nights

 

[tinku dhar]

finally i dont need it now switched to ul plan thank god no more sleepless nights

m8 wat is this plan ?????????????

regards

 

[Vyasram]

see a thread "bsnl breaks the silence" in the gen/tech news

 

[troubleshooter]

I have an Intel 845 GEBV2 motherboard with an Intel BIOS how do i automate my MTNL Triband connection. Please help me.

 

[Vyasram]

This is what i did
Installed xp on c
Installed xp64 on d and made it default boot
Made the user accounts for my family in winxp 32
Installed utorrent and fdm on xp64.
Now when my pc automatically switches on by bios it'll boot into xp64
So i dont have to set default accounts in xp32 where all my personal data is stored with COMPLETE PRIVACY.

 

[sre06]

please tell me how to reduce my bills of data one

 

[superuser]

simply not rq for those on unlimited as i am

 

[anantkhaitan]

Probably this thread may help you

*www.thinkdigit.com/forum/showthread.php?t=35347

 

[Manshahia]

wat if one has to dial to connect to the internet??
i think u hav an answer to that too..
i m having the modem provided by the bsnl....

 

[vijubizz]

Thanks yarana,
I will try this as soon as i get H500 plan. My BIOS does not have auto power facilities, is there any 3rd party app to do it?

what app can be used ???
Btw what is your dataone plan ??

Yaa,there is a 3rd party free software for Autopower Facility...You can download from Here

 

[thewisecrab]

Dude, you digged up a two year old thread
You cant expect a reply now
A good tutorial though...