Thanks to this forum , i bought a " CM Real Power Pro 460W" (Corsair , Antec, VIP were unavaible in North Dehi). My comp configuration though will push it a little. Since i was on a tighter budget. I got E5200 CPU (45 nm 2.5 Dual Core), M/B - Gigabyte G31-ES2L , Kingston (2*2GB 800 Mhz Ram) , Leadtek 9600 GT Extreme (factory overclocked to 713 instead of 650). 2 HDD ( wdd 500 & Wdd 250). Samsung Dvd Writer. Navtech 701 LC Cabinet (transparent side view + lcd front supporting 4 front USB) Lots of fans ( 2*120 mm fan for side n rear, 1*80mm fan , 2 small fans on each hard disk). Microtek 800 VA UPS.
I ran quake 4 at ultra setting at 4X AA for 2 hrs straight without any issue. The cabinet temp 33 C at idle and 37 C on full load at non A.C. room. The temp in my room should be about 30 C (44 C on the outside).
My question remains,
1. Am i pushing my PSU a little too far?
2. Can i safely overclock my cpu to 3.2 Ghz without breaking PSU power limit.
I ran quake 4 at ultra setting at 4X AA for 2 hrs straight without any issue. The cabinet temp 33 C at idle and 37 C on full load at non A.C. room. The temp in my room should be about 30 C (44 C on the outside).
My question remains,
1. Am i pushing my PSU a little too far?
2. Can i safely overclock my cpu to 3.2 Ghz without breaking PSU power limit.