fsb

Hi I have G Skill DDR3 1600 RAM. Earlier it used to show 1333 mghz so I changed it to 1600. When I checked CPUZ It showed me that the FSB:DRAM IS 1:4 . I think that it is faster than FSB. So is it possible to get 4:4 ratio. What will happen if I get that. Thnx

Hi, I'm having a pair of hynix 2 GB ddr3 ram. Now I want to know if I should try to overclock it or not, and if no, then what could probably in wrong? I would tweak just the cas latency and if possible, the fsb. You can check my whole config in my signature. I would also like to tell that there...

I have recently got one RAM of corsair 1600 MHZ(CMV4GX3M1A1600C11) but my mobo(Intel DH61WW) Package shows it supports 1066 or 1333 fsb RAM's..The ram module still seal packed, asked the shop,from where it was purchased and they are saying nothing will happen..(Actually it was purchased through...

Hi friends i have Intel Pentium 4 processor 511 (1M cache, 2.80 GHz, 533 MHz FSB) when i planning to buy a board for this only Gigabyte G41 combo motherboard is available in market my processor FSB is 533 but board indiactes 1333/1066/800 FSB so how ll be the performance of the...

Hi, I would like to know if C2D E6550 is compatible with Dell Optiplex 780 or not ? Dell Optiplex 780 has Q45 chipset. FSB wont be a problem na ? Regards.

Guys i just wanna know whether "Intel® Pentium® 4 Processor supporting HT Technology 3.40 GHz, 1M Cache, 800 MHz FSB" is compatibale with DG31PR mobo ?? Intel® Pentium® 4 Processor supporting HT Technology 3.40 GHz, 1M Cache, 800 MHz FSB

Hello everyone, I have selected these two motherboards which one of them is better Asus P5G41T-M LX3 level DDR3 OR GIGABYTE GA-G41MT-S2PT/2.0 Also I have a C2D proccessor (E6300), what is the maximum speed DDR3 RAM can this processor support. Does processor's FSB has something to...

How to enable FSB overclock? Motherboard: 945GZM-S2;rev-3.x

i am new to overclocking and would really admire your help..... i have C2Q Q8400, Intel dg41rq, 2gb ram, ati 4350 1gb..... i don't have any kind of fsb setting in bios... so i cant understand how to overclock my gpu.... plz help.....

Hi guys i have a M68MT -S2P but the problem it i cant overclock it over 5mhz i want to clock it at least 3.3 0r 3.5Ghz here are some of the BIOS snaps it cant even boot at 210 Mhz (FSB)

Hi guys i was wondering if the below ram would work in my ASUS G41 COMBO FSB upto 1333. I just investing for future. As i would want some boost in performance from the current ddr2 800mhz. My current proccy is e5800 so 2 things 1. will the ram of 1600 mhz work or not at reduced fsb is...

Hi, Before saying anything here's the config: CPU: AMD Phenom II X2 550BE MotherBoard: AsRock M3A-785GXH/128M Memory: 2x2GB DDR3 1333 Kingston PSU: Silverstone 500w Graphics Card: Sapphire HD6850 HDD: Seagate 500GB X 2 in RAID 0 Monitor: Samsung 20" 1600x900 Now here's the problem, I...

I am planning to upgrade the processor to core 2 duo. let me know if any one have one wit max frequency at 1066mhz fsb only as its for my intel d945gcl very old MB. Post your offer.

As the title says, pls solve this dilemma for me Q6600 Specs - 8MB Cache, 2.45ghz, 1066mhz FSB Q8400 Specs - 4MB Cache, 2.66ghz, 1333mhz FSB Whats the deciding factor for processor series? Say, in case of Nvidia GPU's we know that a 8800 series provides better performance than 9500...

P5G41T-M LX @2400k Intel E5800 3.2 Ghz , 2mb Cache, 800 FSB @3300k is that best or not. Please explain about that. Thanks all of you

I recently bought a cheap rig as i found buyer for my Gigabyte-31 based comp. On Mix and matching old + new rig My Current Configuration CPU - Intel 5500 (800 FSB) with default Intel CPU fan M/B - Gigabyte G41MT-ES2L (Ver 1.0) - Updated Bios to latest F5 Ram - 2x 2GB Kingston 1333Mhz Value...

I am using a E4500@2.2GHZ...i am having a serious prob. in overclokin with it.whenever i go over 253mhz to 254mhz...the PC wont boot up..only humming sound of 5 fans irritates my ear..no hard disk bootup!!!. THEN I decrease my latency 5-5-5-15 to 3-3-3-9 or 4-4-4-12or16 and set FSB:RAM TO 1:1 or...

hi my P4 computer motherboard died and it cant be repaired so is there any board available that can fit my P4 along with ddr1 ram how about Gigabyte G31 motherboard ,this board support a minimum of 800 FSB but my Processor is 533 FSB my config 2.8Ghz P4 511 533Mhz FSB (lga 775) intel d101 ggc...

I am planning to buy shortly either a Dell Vostro A840 or Dell Vostro A860. The A840 comes with a Intel Dual Core T2390 1.86 GHz, 1MB L2 Cache and 533 MHz FSB while the A860 comes with a Intel Celeron 560 2.13 GHz, 1MB L2 Cache and 533 MHz FSB. Rest of the configuration is the same with 1 GB...

Hey everyone, pls suggest a mobo that can stand rigorous OC at around the 4k mark.....preferably from gigabyte, else asus ......internal graphics not mandatory Requirements:- Supports min. 1333Mhz FSB Supports 8GB DDR2 800Mhz or above Has solid caps.... Pci-e x16 2.0