Time to upgrade my pc but its very confusing nowadays....

OP
heartripple

heartripple

In the zone
^why an H67 board? get Z68 if you are getting k processor.
Gigabyte GA-Z68MA-D2H-B3 @ 9.5k
Gigabyte GA-Z68X-UD3H-B3 @ 11.5k


What is the difference between them?:idea:
There would be any noticeable performance boost ?????:-( then I will go for these motherboard...:!:

What is the difference between them?:idea:
There would be any noticeable performance boost ?????:-( then I will go for these motherboard...:!:



And 1 more thing these motherboards are not available ......came to know I will have to wait at least 15 days....
 

vickybat

I am the night...I am...
^^ You cannot overclock your 'k' processor using an h67 motherboard. Get a p67 or z68 motherboard as bare minimum.

Board suggested by jaskanwar are pretty good. Go for the gigabyte z68 D2H-B3 board.
 
OP
heartripple

heartripple

In the zone
^^ You cannot overclock your 'k' processor using an h67 motherboard. Get a p67 or z68 motherboard as bare minimum.

Board suggested by jaskanwar are pretty good. Go for the gigabyte z68 D2H-B3 board.


Are you sure ?? Asus website suggest it allows overclocking :idea:
ASUSTeK Computer Inc. - Motherboards- ASUS P8H67-M PRO

plzz tell me about this. I am going to place my order in this evening....:sad:


Off Topic ( Take it very lightly )

See I am right its very confusing now a days....
 

vickybat

I am the night...I am...
^^ Yes i am 100% sure. See h67 does not allow to increase the cpu multiplier and the bclk in sandybridge chips is locked. So it can't be increased therefore restricting overclocking. Increasing multiplier is the only way and for that, you need p67 or z68 motherboards.

Check this.
 
OP
heartripple

heartripple

In the zone
Guys I have ordered hardwares as shown below.

Intel i2500k
Asus P8Z68-V
Cooler Master Storm Scout
Corsair 4GB x 2
Arctic Silver 5 Thermal Compound


All this stuff made the hole of Rs 34725 /- in my pocket.....:razz:
Now I am waiting for all parts to come my place.:!: :hyper::hyper::hyper:


Thank you for be there all the time and supporting :doublethumb::doublethumb::doublethumb:
me.....:smile::smile::smile:. TDF Zindabad :grin::grin:

Stage 1 completed Order Placed to ITWARES

Joined the Z68 club
 
OP
heartripple

heartripple

In the zone
@ Jaskanwar Singh Thanks Bro.... will post pics later...

I got the Thermal Compound but I found it has no bo that suggest that its Arctic Silver 5... what to do ????

Got Arctic Silver 5 Thermal Compound just few minutes ago.:smile:

my courier came to surat checked it two hours ago might come to my place by the evening . But i have two problem. First of all no confirmationthat my ram has been dispatched or not by primeabgb . Second think i am bed having rest food poison had caught me last night may be i would have to get admitted in the evening for further treatment


Post edited
Guys I have another problem plzz tell me what to do..

I had ordered for Corsair CMX4GX3M1A1600C9 4gb x 2 on primeabgb.com but I havent got the confirmation mail of web order by them. I have mailed them about this and they told me that they will take immediate action on this.
Now I am thinking that I should drop the idea of Corsair RAM. and will go for Gskill F3-12800CL9D-8GBXL . So tell me is it compatible with Asus P8Z68- V motherboard or not. If yes then which one is better Corsair or G-Skill ??
 

S_V

In the zone
Performance wise Both are good but When comes to Warranty or service ,Nothing Matchs Corsair People...
Now you decide... ! Both are Compatible to your Mobo..
 

Jaskanwar Singh

Aspiring Novelist
I had ordered for Corsair CMX4GX3M1A1600C9 4gb x 2 on primeabgb.com but I havent got the confirmation mail of web order by them. I have mailed them about this and they told me that they will take immediate action on this.
Now I am thinking that I should drop the idea of Corsair RAM. and will go for Gskill F3-12800CL9D-8GBXL . So tell me is it compatible with Asus P8Z68- V motherboard or not. If yes then which one is better Corsair or G-Skill ??

that corsair is 1.65v. not for sandybridge!

get that g.skill
 
OP
heartripple

heartripple

In the zone
I have ordered for that G-skill RAM but PRIMEABGB says they will dispatch it tomorrow...and I can't wait for another second...its like killing me....

they made mistake though they are not apologized for that and telling me to wait for 1 more day.:flu-evilgrin3::flu-evilgrin3:

My main problem is tomorrow is friday (week end ) so may be late of courier service .....:banghead::banghead:


POST EDITED

Received Motherboard + Processor + Cabinet

But the front panel of cabinet is damaged and found that cabinet is very delicate . I will never recommend COOLERMASTER products.:!::!::!::!:
I mean yaar I have spent Rs. 6100/- for that product and found that the locking system of front panel bezel is very delicate.I can brake very easily.:x



One of my friend has COOLERMASTER Cosmos cabinet. when he installed third party heatsink and fan for CPU he just can not put the side panel on place... heatsink touches that side panel....who can expect such kinda problem with such an expensive cabinet.....coolermaster sucks....
 

arko1983

In the zone
But the front panel of cabinet is damaged and found that cabinet is very delicate . I will never recommend COOLERMASTER products.:!::!::!::!:
I mean yaar I have spent Rs. 6100/- for that product and found that the locking system of front panel bezel is very delicate.I can brake very easily.:x



One of my friend has COOLERMASTER Cosmos cabinet. when he installed third party heatsink and fan for CPU he just can not put the side panel on place... heatsink touches that side panel....who can expect such kinda problem with such an expensive cabinet.....coolermaster sucks....

coolermaster products ie cabinet build quality is good.u r friend should have checked his cabby width bf installing huge heatsink.mid tower cabby always doesnt support huge gfx cards or huge heatsinks.do research bf buying.btw if u r cabby is damaged in shiping get it changed.
 
OP
heartripple

heartripple

In the zone
coolermaster products ie cabinet build quality is good.u r friend should have checked his cabby width bf installing huge heatsink.mid tower cabby always doesnt support huge gfx cards or huge heatsinks.do research bf buying.btw if u r cabby is damaged in shiping get it changed.

I think Cosmos is full tower cabinet yaar.... In my cabinet its plastic notch which holds the bezel....and its also very delicate.....
 

arko1983

In the zone
I think Cosmos is full tower cabinet yaar.... In my cabinet its plastic notch which holds the bezel....and its also very delicate.....

I didnt know which cabby it was but cosmos for 6k :shock:
u bought storm scout which is mid tower.(saw this later)
I thought it was a mid tower cause of price.
my cabby (atcs 840) is good except for the front part (plastic notch) but i dont open very often so its not a prob. rest build quality is good for that price range.
 

Sarath

iDota
G.skill is equally good and also does not come in the way of most CPU coolers Check this

Also I suggest you save up and get the GPU or something similar as suggested by Cilius, later on as an upgrade. But of you are happy with the 9800 then let it be. But the latest games will soon cripple.

I didnt know which cabby it was but cosmos for 6k :shock:
u bought storm scout which is mid tower.(saw this later)
I thought it was a mid tower cause of price.
my cabby (atcs 840) is good except for the front part (plastic notch) but i dont open very often so its not a prob. rest build quality is good for that price range.

His friends Cosmos LOL!

Its really surprising that a full tower is not able to contain a third party cooler/heat sink. Not a nice development.

Get your cabbie replaced. The shipping charges will pinch though. Dont keep a defective product. Or are you complaining about the build quality in general.

I would have recommended a NZXT Tempest Evo, a tank of a case, if I had seen this thread before. But the CM you have should be equally good.
 
Top Bottom