System Boot Problem

[Zangetsu]

Hi Guys,
from last week I m getting this problem.
I m using NZXT Gamma.

Problem: When I press the button on Cabby to start PC..it doesn't get start...then after pressing the button 2~3 times it starts & boots & then works perfectly...

why it is not ON on 1st click?

 

[asingh]

Something is loose somewhere.

 

[Zangetsu]

Something is loose somewhere.

What is loose?
its difficult to see the wire connected to the front button..how to open that?

 

[Tech_Wiz]

On the motherboard there are Front Panel Connector area remove all the pins. Check of anything is bent. Clean it a bit and replace the Connectors.

Also Check Mobo Main Power Connectors usually 2 nos if they are fitted correctly.

And when the system is not booting does it give BEEP errors?

 

[mithun_mrg]

Also shuffle the power switch with reset switch to eliminate the cause of a loose or faulty switch if the prob persists after shuffling & if u r comfortable shorten the power switch headers in MB for a second with a screwdriver and see

 

[Zangetsu]

And when the system is not booting does it give BEEP errors?

No BEEP errors...

 

[pimpom]

Others have already pointed to the power switch. Other possibilities are a low mains voltage or a weak or failing PSU.

 

[Zangetsu]

Other possibilities are a low mains voltage or a weak or failing PSU.

buddy I bought this PSU in 2009 & its VX450

 

[mithun_mrg]

VX450 is a very good psu but it also may fail