Post Your Overclocks !!

Status
Not open for further replies.
Q

quad master

In the zone
If your computer doesnt post
then u have to increase your Vcore or CPU Voltage
to the next number.

same applies for ram.

But i warn u that keep an eye on the temps.

Also do u have the default cooler or have different cooler like ASUS Starice or Coolermaster Ultra Vortex.

@ Magnet - For mild overclocks like 400 - 500Mhz extra on 3000/3200 stock
cooler is fine unless temps are kept in control

You should use a cooler like ASUS Starice or Coolermaster Ultra Vortex as they control your temps for overclocks above 600+ Mhz.

Every cooler is fine till the temps are in control.
 
OP
darklord

darklord

Cyborg Agent
@ Magnet
I generally use Stock cooler.the 2.9GHz thing was done with CM Ultra Vortex but it isnt any better than the stock cooler.
 
siriusb

siriusb

Cyborg Agent
I use the default cooler. Tell me, is there a sacred temp for cpu/ram above which you shouldn't subject a 3200+/hynix? Coz I read this somewhere: ""Lets say you were in the desert and it's 108 degrees, you grab onto a power line, you get electrocuted. Now, lets say you were in Antarctica it's -36, you grab a power line, you STILL get electrocuted"
Kinda funny actually.

My cpu idles at 44deg and at 100% it's 56deg. I have QFan at 54. I can't monitor the ram, so I guess I must controll my vdimm?
 
siriusb

siriusb

Cyborg Agent
QwertyManiac said:
p.s. Siriusb - y r u hidin yr online presence ???
Click to expand...

I never hide from online presence. Whatever gave you that idea? And why wud u want to see me online? U can pm me anytime.
 
QwertyManiac

QwertyManiac

Commander in Chief
no i mean , i dont see u on the members currently online...

As for PMing, they sux as i m alyays not allowed to do one but i recieve without permission...

Well, bout my intel problem ....
 
OP
darklord

darklord

Cyborg Agent
I use the default cooler. Tell me, is there a sacred temp for cpu/ram above which you shouldn't subject a 3200+/hynix?
Click to expand...

Well there is no way to check RAM temps.CPU temps are ok if they are in the 50-55c range.
I guess you have A8N-E board,this board doesnt support Vdimm above 3.0V
so RAM heating isnt an issue for you as you have Hynix and not Winbond. :wink:

"Lets say you were in the desert and it's 108 degrees, you grab onto a power line, you get electrocuted. Now, lets say you were in Antarctica it's -36, you grab a power line, you STILL get electrocuted"
Click to expand...

:roll: :roll: :roll:

can u overclock an original Intel ???
Click to expand...
There is no way to overclock Original Intel Motherboards. :cry:
 
Q

quad master

In the zone
Before u try anything , ne sort of damage caused in not my responsibility

Stock Intel overclocking
There is a hidden option on some stock intels
Try and find an option called burn in mode in advanced settings in BIOS.
And here you can overclock your sustem in %
pretty simple.
Dont remember the % values its till a max of 10 or 15%.

Also Try a software called clockgen for ur respective motherboard and overclock ur Intel from windows.

Thats all ur options.

Keep an eye on the CPU Temp with MBM 5 / Speed Fan
You can check ur CPU speed in CPU-Z
 
siriusb

siriusb

Cyborg Agent
Hey quadmaster, post your OC here too. I saw many guys supporting dfi in some poll here. I hope they notice this post too.
I also wanted to know if my fsb and mem are running in sync.
 
OP
darklord

darklord

Cyborg Agent
From the Screenshot that you have posted, yes your RAM and HTT is in Sync,meaning it is running 1:1
 
Q

quad master

In the zone
@Sirus - i still have to get my new rig.
currently i on P3 , i am getting my rig components
slowly.

Some hardware is comming from Outside india so its taking time.

Also it was me who started that DFI Thread
 
QwertyManiac

QwertyManiac

Commander in Chief
But in 865, u can only change the graphics core in burn-in mode...
And when i change that, it shows - not supported.
 
T

thinkAI

Broken In
I want to Overclock my new rig so Plz help me out as i m new to Overclocking. I have AMD 64 Bit 2800 Processor + MSI K8MM Mobo + 256 DDR 400 MHz RAM.
 
OP
darklord

darklord

Cyborg Agent
It would be better if you dont overclock your PC as its based on a chipset with inbuilt grafix and these chipsets dont oc too well.May be you can go 200-300 Mhz up,but nothing more .Still try out.

First check what your BIOS allows in terms of OC options.
 
S

sunmysore

Journeyman
my best is a 2532MHz on a AXP Barton 2500+...

2532MHz, VCore 2.00V, 230x11...suicide shot.

I had to voltmod my mobio to get volts above 1.85..hehe

It was stable at 220x11 = 2442MHz at VCore 2.05V

Stupid Asus mobos, wont allow me to go beyond 2.1V :( have an inbuilt overvoltage protecion....
 
Status
Not open for further replies.
Top Bottom