Please suggest Mother Board.

Status
Not open for further replies.

ECE0105

In the zone
Hi Guys,

I have an old P4 2.8GHz processor (511) whose motherboard died some months ago.

I also have an additional 1 Gb DDR2 (667MHz) RAM and also 2x512Mb DDR1 RAM (Leftover from the old Motherboard), an 80Gb SATA HDD & Cabinet.

Please suggest me a low cost motherboard, so that I can hook up this rig.

This would only be used for running Softwares like QTP, SilkTest, Loderunner and Winrunner with Windows XP as the OS and some regular internet browsing.

This is just to be used as an additional Computer and want to keep the cost as low as possible.

The board can either support DDR2 RAM or DDR1 RAM... I have all other components....

Please help.....
 
OP
ECE0105

ECE0105

In the zone
Please help guys... I've searched through the forum, but do not find any new posts on this setup... All P4 related posts are prior to '07
 

Psychosocial

Violent serenity.
Cant help it. P4 supporting Mobos are out of market.

If you are lucky then get hold of an old 845 chipset. Otherwise, bad-luck :(.
 

comp@ddict

EXIT: DATA Junkyard
Unless you get a 915 or 865, you're outta luck



EDIT:

Got it:- eVGA nForce 610i


Details:

Based on nForce 610i/ GeForce 7050 chipset , Supports Intel Core 2 Extreme, Intel Core 2 Quad, Intel Core 2 Duo, Pentium EE, and Pentium processors , 1066/800 Mhz Front Side Bus . Memory
2 x 240-pin DIMM sockets Single Channel DDR2 , Maximum of 4GB of DDR2 533/667MHz . Expansion Slot
1 x PCIe x16, 1 x PCIe x1, 2 x PCI , 2 x 32-bit PCI, support for PCI 2.1 , Storage I/O
1 x UltraDMA133 , 4 x Serial ATA 300MB/sec with support for RAID 0, RAID 1 , 1 x Floppy disk drive connector . Integrated Peripherals
7.1 RealTek HD , 10/100 , Multi I/O
1 x PS2 Keyboard , 1 x PS2 Mouse , 8 x USB2.0 ports (4 external + 4 internal headers) , Audio connector (Line-in, Line-out, MIC



There you go.
 
OP
ECE0105

ECE0105

In the zone
Thanks a lot bro... But I was going through the Intel website as well and I see that the P4 I have is a 775-LGA, so can I not get a 965 Mobo?

And, eVGA nForce 610i, I heard is a good mobo. May I know its price?
 
OP
ECE0105

ECE0105

In the zone
Yep, it is PIN less.....

And, does d915gav support Dual-channel mode for DDR1 RAM? cos as I have mentioned, I have two sticks of DDR400 RAM..

Thanks a lot for your replies.
 
Status
Not open for further replies.
Top Bottom