PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot Itself

[jbohaj]

Hello,

(1) When I Switch ON UPS, then PC Restart (Boot) automatically.

(2) When I put PC to Standby Mode, even then then it Restart (Boot) automatically.

What is the problem

 

[asingh]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

System configuration.

 

[jbohaj]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

dear, following is system config: -

Windows- XP Professional SP3
Processor- Intel Pentium D, 3.40Ghz
RAM- 2.5 GB
Mother Board- Intel 946GZ Express Chipset Family

Today another problem arise i.e. After shutting down, PC start automatically.

Where is fault?, why these problems appearing one by one. Please tell solution.

 

[asingh]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Powersupply..?

 

[jbohaj]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

sorry, are your asking or telling?

 

[asingh]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

^^
Asking.

 

[coderunknown]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

@jbohar, what is the SMPS you having?

@asingh, can't it be cause of some setting in BIOS? some motherboard have option in BIOS that turn PC on as soon as they get power. can't it be same case with OP?

 

[jerrin_ss5]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

check whther ur power supply is delivering proper power !!
if ur mo-bo has on-board LED's use that to gauge it !!!

 

[jbohaj]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Thanks but problem is still arising. while running, sometime PC start automatically. Also PC Starts on Shut Down & if putting on Standby.

@ Sam: Power Supply is Tech-Com, Model - PSP 4500 (450 Watt).
Where in BIOS this setting is situated?

@ Jerrin: Please tell how proper distribution of Power Supply can be checked?
Also, IF mo-bo has on-board LED', then where it situated & on mo-bo & how to gauge it?

Please tell how to create a Image with Norton Ghost at this Post: -
*www.thinkdigit.com/forum/software-...lled-software-onlyto-solve-wndws-problms.html

 

[jerrin_ss5]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

the led placement for mo-bo differ for each brand !!
but in ur case i think ther's no LED on ur mo-bo!!
so now the only option is to check ur mo-bo with someone else's power supply !!!

 

[jbohaj]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Thanks jerrin.. I'll test mo-bo with other Power Supply. But from last 2-3 years, PC is running on 450 Watt power Supply. My friend has Power Supply of 650 watts, if I test mo-bo with that (650 Watt Power Supply). Can it cause harm to mobo or to HDD??

Also please see above Post URL Link regarding Norton Ghost.

Thanks.

 

[asingh]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

At OP. For starters try to reset CMOS. Remove the PSU cable, and press the chassis on/off button for 2-3 seconds. Then remove the CMOS battery for 2 minutes. Plug it back ion and see if you can boot it normally.

 

[jbohaj]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Thanks Asingh.
1st Step: Are you talking about removing PSU cable from mo-bo??. if yes, this step is ok.

2nd Step: But my PSU have not On/Off button. Should I On/off UPS button at this point.

3rd Step: Pluck CMOS for 2 minutes.
4th Step: Fix CMOS in mo-bo.
5th Step: Fix PSU Cable.

Actually I am new to hardware so asking this. are you talking about these steps??.

 

[asingh]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Just do 3,4,5. Keep the power outlet connection remove.

 

[jerrin_ss5]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Thanks jerrin.. I'll test mo-bo with other Power Supply. But from last 2-3 years, PC is running on 450 Watt power Supply. My friend has Power Supply of 650 watts, if I test mo-bo with that (650 Watt Power Supply). Can it cause harm to mobo or to HDD??

Also please see above Post URL Link regarding Norton Ghost.

Thanks.

generally higher watts PSU won't damage ur mo-bo but make sure the PSU ur gonna use is a branded one !!!

 

[jbohaj]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Thanks guys, your suggestions works.
Booting problems were due to faulty power supply, replaced it & all gone.
@ Jerrin: Now Champion named Power supply is running. Is it fine??.

 

[coderunknown]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

^^ please stay away from PSU that reads: extreme, champion or super, etc. these names are used to fool the user to buy. drop that PSU & get a good one like Corsair (if your pocket deep) or FSP (for 2k & below). if you'll upgrade your PC to a better one, get Corsair or at least buy FSP Saga II 350W. its low cost & will keep your PC safe.

 

[jerrin_ss5]

Re: PC Boot automaticaly, after Put on Standby AND After Switching On UPS, PC Boot It

Thanks guys, your suggestions works.
Booting problems were due to faulty power supply, replaced it & all gone.
@ Jerrin: Now Champion named Power supply is running. Is it fine??.

well never heard of such a PSU go for a branded one such as cooler master or corsair !!