mercury 845gl chipset

Status
Not open for further replies.

monny

Right off the assembly line
Hi friends,
I use intel p4 2.0ghz with 256mb sd@ 133mhz ram. My motherboard is mercury 845gl ndsmx. I have lost my motherboard manual can anyone provide a link for the manual. Or can i update my ram to 1024mb ddr @ 333/400mhz.

thank you
 

wizrulz

GUNNING DOWN TEAMS
monny said:
Hi friends,
I use intel p4 2.0ghz with 256mb sd@ 133mhz ram. My motherboard is mercury 845gl ndsmx. I have lost my motherboard manual can anyone provide a link for the manual. Or can i update my ram to 1024mb ddr @ 333/400mhz.

thank you


MANUAL

See if his helps
 

topgear

Super Moderator
Staff member
monny said:
Hi friends,
I use intel p4 2.0ghz with 256mb sd@ 133mhz ram. My motherboard is mercury 845gl ndsmx. I have lost my motherboard manual can anyone provide a link for the manual. Or can i update my ram to 1024mb ddr @ 333/400mhz.

thank you

If your mobo supports (READ THE MANUAL FIRST) U can coz I have one mercury pi845glm-agp board which supports
2GB of Ram( 1 GB per slot) @266 MHz speed but for the unavailability of 266Mhz I bought one Zion 512MB DDR ram module @333 MHz speed which
is performing very well without any problem
 

tushars

Right off the assembly line
I have the same problem using Mercury 845gl ndsmx but it does not support ram morethan 256 mb either DDR or SD I have even purchased the 1gb 400 ddr1 but it never supported I have os of win2000 earlier were w98 but now speed is dgreaded for the same. the cmedia 97 works fine for sound drivers. Is there any solution for speed.
 

topgear

Super Moderator
Staff member
^^ Your mobo has 2 DDR & 2 SD Ram Slots.
Use either DDR or SD ram slot only. Don't use DDR & SD Ram slot together.

Now follow these procedures :

1. Update your mobo bios.
2. Remove all Rams.
3. Install only the DDR 1 GB 400Mhz Ram module on DDR1 Slot.
4. See if your system starts.

5. If not then :

1. Check the Ram
2. A DDR 512MB ram will work for sure as I've seen people running 512MB DDR Ram with that board.
 

aytus

The Boss
hey topgear. got any links for the bios upgrades?? ive got a mercury 845gl mobo.. KOB845gx. know of any upgraded bios...? i m willing to try out. i2m runnin ram,s that support 200mhz at 133 due to mobo constrains.
 

topgear

Super Moderator
Staff member
Try mercury's official website:
www.mercury-pc.com

As regarding ram speed issue your DDR 200Mhz ram will run @ 133Mhz speed coz it's the limitation of the chipset not the mobo. So if your sys is running fine than there is no need to update the bios.
 

tushars

Right off the assembly line
^^ Your mobo has 2 DDR & 2 SD Ram Slots.
Use either DDR or SD ram slot only. Don't use DDR & SD Ram slot together.

Now follow these procedures :

1. Update your mobo bios.
2. Remove all Rams.
3. Install only the DDR 1 GB 400Mhz Ram module on DDR1 Slot.
4. See if your system starts.

5. If not then :

1. Check the Ram
2. A DDR 512MB ram will work for sure as I've seen people running 512MB DDR Ram with that board.

Hello thanks for suggestion,

I tried other combinations also a 1gb 400MHz is not working, so tried with 2.5 processor still do not support, Now trying to locate 333MHz or 133 1gb ram.
 
Status
Not open for further replies.
Top Bottom