D
Deleted member 26636
Guest
i bought a new PC yesterday(config in my sig)...there are 4 fans in my cabinet- 1 at the front & side each as intake fans & 1 at the rear & top as exhausts.is this arrangement ok?
the card looks like this- *www.iimmgg.com/image/1d220621e551f6afb5f358a458aea14d*i.iimmgg.com/images/th/94e57a1a896caef30ab3cb5a78c9a234.jpg Anyway i configured the fan settings in afterburner.here is a screen- *i.iimmgg.com/images/th/b645a6c71a2b48a364f2e51de94a189c.png
i have configured it so that the fan speed & temps remain same.say for instance the temp is 40deg, the fan speed will be 40%.only from 85deg & above the fan speed is set to 100%.is this config ok?
here are a few GPU Z screenshots- *i.iimmgg.com/images/th/f5481868e366138cc4df926fd3c2d2f9.png *i.iimmgg.com/images/th/222ed570b8bf1305b59f309e0b1b0f62.png
Ran some tests with 3d mark vantage- Results with custom settings-High- *i.iimmgg.com/images/th/61ed09c23664d994b7a93ffc3966501d.png *i.iimmgg.com/images/th/bbf65fb6bb7eb800ac2fcca7361eb0f1.pngPerformance- *i.iimmgg.com/images/th/5dc14173c3265620f36ff56ccf33a06c.png *i.iimmgg.com/images/th/d090d3214be189f26844b570067085e0.png
are these results good? they seem too low.
Unigine Heaven settings & results- *i.iimmgg.com/images/th/7c0eba3fe3dcd6ede3eab7cd21e1d0a6.png
again, not sure if these are ok.
Kombustor settings & results- *i.iimmgg.com/images/th/532c21810963ed51e27ce7ef32cc65a0.png *i.iimmgg.com/images/th/e2326433cec01a870957f470d931e3b6.png
please tell me if my results are ok..3d mark vantage & unigine results seem low.perhaps i should lower my settings. Anyway i've noticed that the card idles at 48- 54degs with 0-5% GPU load.after almost an hour of gaming in Split Second, the temps were around 78deg. i think the temps are normal.what do you guys think?the fan is quiet..no problems in the sound department.
the card looks like this- *www.iimmgg.com/image/1d220621e551f6afb5f358a458aea14d*i.iimmgg.com/images/th/94e57a1a896caef30ab3cb5a78c9a234.jpg Anyway i configured the fan settings in afterburner.here is a screen- *i.iimmgg.com/images/th/b645a6c71a2b48a364f2e51de94a189c.png
i have configured it so that the fan speed & temps remain same.say for instance the temp is 40deg, the fan speed will be 40%.only from 85deg & above the fan speed is set to 100%.is this config ok?
here are a few GPU Z screenshots- *i.iimmgg.com/images/th/f5481868e366138cc4df926fd3c2d2f9.png *i.iimmgg.com/images/th/222ed570b8bf1305b59f309e0b1b0f62.png
Ran some tests with 3d mark vantage- Results with custom settings-High- *i.iimmgg.com/images/th/61ed09c23664d994b7a93ffc3966501d.png *i.iimmgg.com/images/th/bbf65fb6bb7eb800ac2fcca7361eb0f1.pngPerformance- *i.iimmgg.com/images/th/5dc14173c3265620f36ff56ccf33a06c.png *i.iimmgg.com/images/th/d090d3214be189f26844b570067085e0.png
are these results good? they seem too low.
Unigine Heaven settings & results- *i.iimmgg.com/images/th/7c0eba3fe3dcd6ede3eab7cd21e1d0a6.png
again, not sure if these are ok.
Kombustor settings & results- *i.iimmgg.com/images/th/532c21810963ed51e27ce7ef32cc65a0.png *i.iimmgg.com/images/th/e2326433cec01a870957f470d931e3b6.png
please tell me if my results are ok..3d mark vantage & unigine results seem low.perhaps i should lower my settings. Anyway i've noticed that the card idles at 48- 54degs with 0-5% GPU load.after almost an hour of gaming in Split Second, the temps were around 78deg. i think the temps are normal.what do you guys think?the fan is quiet..no problems in the sound department.
Last edited by a moderator: