re: CPU Overclock List & Discussion Thread
DRAM Voltage is set to AUTO (1.600V) in BIOS.
DRAM Voltage is set to AUTO (1.600V) in BIOS.
Last edited:
CPU Overclock List & Discussion Thread
OP
re: CPU Overclock List & Discussion Thread
^^ you've corsair 4GB Dual Channel DDR3 Memory Kit (CMX4GX3M2A1600C9 ) - many have faced issue with the particluar ram kit like it's running fine at 1333Mhz but can't run at 1600Mhz - try set the DRAM volt to 1.7V under bios setting ( do it at your own risk ) and see if you can run them at ~1760+ Mhz speed
^^ you've corsair 4GB Dual Channel DDR3 Memory Kit (CMX4GX3M2A1600C9 ) - many have faced issue with the particluar ram kit like it's running fine at 1333Mhz but can't run at 1600Mhz - try set the DRAM volt to 1.7V under bios setting ( do it at your own risk ) and see if you can run them at ~1760+ Mhz speed
re: CPU Overclock List & Discussion Thread
I noticed that over-tightening the heatsink resulted in idle temps of 40 deg cel and load temps over 80 deg cel.
I am using Kama Flow 2 fans in push and pull config.
Loosened it up a bit and not idle temps are 33 and load temps are 74 max. PC is damn silent. Kept the Ultra Kaze at rear, keeping it off.
I noticed that over-tightening the heatsink resulted in idle temps of 40 deg cel and load temps over 80 deg cel.
I am using Kama Flow 2 fans in push and pull config.
Loosened it up a bit and not idle temps are 33 and load temps are 74 max. PC is damn silent. Kept the Ultra Kaze at rear, keeping it off.
re: CPU Overclock List & Discussion Thread
No, I wont take any risk.
Thanks topgear.
^^ you've corsair 4GB Dual Channel DDR3 Memory Kit (CMX4GX3M2A1600C9 ) - many have faced issue with the particluar ram kit like it's running fine at 1333Mhz but can't run at 1600Mhz - try set the DRAM volt to 1.7V under bios setting ( do it at your own risk ) and see if you can run them at ~1760+ Mhz speed
No, I wont take any risk.
Thanks topgear.
kapilove77
Padawan
re: CPU Overclock List & Discussion Thread
I wanted to clarify something as i am noob in overclocking.
I got my sig rig and i overclocked it. Not manually just automatically that my mobo utility provided. And i can see when i stress my cpu it went to 4.2 ghz. So i call it stable overclocked or something?
I wanted to clarify something as i am noob in overclocking.
I got my sig rig and i overclocked it. Not manually just automatically that my mobo utility provided. And i can see when i stress my cpu it went to 4.2 ghz. So i call it stable overclocked or something?
mithun_mrg
Cyborg Agent
re: CPU Overclock List & Discussion Thread
i think u have enabled TPU feature in the mb which auto oced it 5ghz the turbo boost freq of ur processor is 3.7 so it is showing 4.2 on full load
oc'ing ur processor manually is also easy since it has an unlocked multiplier & u have an aftermarket cooler but do keep an eye on temps during load use core temp give it small increments & proceed
i think u have enabled TPU feature in the mb which auto oced it 5ghz the turbo boost freq of ur processor is 3.7 so it is showing 4.2 on full load
oc'ing ur processor manually is also easy since it has an unlocked multiplier & u have an aftermarket cooler but do keep an eye on temps during load use core temp give it small increments & proceed
S_V
In the zone
re: CPU Overclock List & Discussion Thread
Run Intel Burn Test , Linx or Prime95 ... While running any of the software make sure you keep an eye on Temps also.. Even OC is stable ,Too high Temps will lead you to BSOD....
But Learn Manual OC from Internet for that processor and the main advantage of Manual OC is that we can maintain LOW volts.. so Temps will be in control...
SandyBride Overclock is very easy compared to Old Generation Processors.....
Run Intel Burn Test , Linx or Prime95 ... While running any of the software make sure you keep an eye on Temps also.. Even OC is stable ,Too high Temps will lead you to BSOD....
But Learn Manual OC from Internet for that processor and the main advantage of Manual OC is that we can maintain LOW volts.. so Temps will be in control...
SandyBride Overclock is very easy compared to Old Generation Processors.....
Last edited:
kapilove77
Padawan
re: CPU Overclock List & Discussion Thread
yes i used tpu so i can say it's overclocked or stable 4.2ghz is called overclocked? i tried that prime software n i got around 60'C temp!
yes i used tpu so i can say it's overclocked or stable 4.2ghz is called overclocked? i tried that prime software n i got around 60'C temp!
kapilove77
Padawan
re: CPU Overclock List & Discussion Thread
ahh maybe later but not for now cuz i m fully satisfied by my pc! but thx for suggestion n info
. ohh forgot its 4.3 when fully stress with 1.3v.
ahh maybe later but not for now cuz i m fully satisfied by my pc! but thx for suggestion n info
. ohh forgot its 4.3 when fully stress with 1.3v.
MegaMind
Human Spambot
re: CPU Overclock List & Discussion Thread
He can still push the proccy a bit with hyper 212+...
He can still push the proccy a bit with hyper 212+...
OP
re: CPU Overclock List & Discussion Thread
great - just make a post with few more details about the OC and your overall system config ( read the first post of this thread ) so that I can include your OC on the list
ahh maybe later but not for now cuz i m fully satisfied by my pc! but thx for suggestion n info
great - just make a post with few more details about the OC and your overall system config ( read the first post of this thread ) so that I can include your OC on the list
mithun_mrg
Cyborg Agent
re: CPU Overclock List & Discussion Thread
Yesterday had some leisure time so i thought of hitting 4.5 @topgear can u please update my oc
*farm7.static.flickr.com/6108/6342042453_05f470f024.jpg
CPU4.5 (Small) by mithun_mrg, on Flickr
*farm7.static.flickr.com/6038/6342042383_67580c740e.jpg
Config (Small) by mithun_mrg, on Flickr
Bigger pics
Yesterday had some leisure time so i thought of hitting 4.5 @topgear can u please update my oc
*farm7.static.flickr.com/6108/6342042453_05f470f024.jpg
CPU4.5 (Small) by mithun_mrg, on Flickr
*farm7.static.flickr.com/6038/6342042383_67580c740e.jpg
Config (Small) by mithun_mrg, on Flickr
Bigger pics
*farm7.static.flickr.com/6236/6342369935_86c704df67.jpg
CPU4.5 by mithun_mrg, on Flickr
CPU4.5 by mithun_mrg, on Flickr
*farm7.static.flickr.com/6096/6342369123_3001db2b28.jpg
Config by mithun_mrg, on Flickr
Config by mithun_mrg, on Flickr
Last edited:
mithun_mrg
Cyborg Agent
re: CPU Overclock List & Discussion Thread
Thanks s_v i am using coolit eco R120(single fan)
will edit the post with bigger picsdone
Thanks s_v i am using coolit eco R120(single fan)
mithun_mrg
Cyborg Agent
re: CPU Overclock List & Discussion Thread
^^ will update tomorrow
^^ will update tomorrow
mithun_mrg
Cyborg Agent
re: CPU Overclock List & Discussion Thread
Thanks Topgear
@s_v here is the cinebench result crashed twice at 1.376V then i cranked it up to 1.416 memory at 1.6 then is ran max temp was registered at 70C will try to hit 4.8 this weekend with that voltage if i can manage another fan in push pull config
*farm7.static.flickr.com/6107/6346297598_0f0ea1b54d.jpg
CPUZ by mithun_mrg, on Flickr
*farm7.static.flickr.com/6110/6345547673_3ae322452c.jpg
TEST RUN by mithun_mrg, on Flickr
Thanks Topgear
@s_v here is the cinebench result crashed twice at 1.376V then i cranked it up to 1.416 memory at 1.6 then is ran max temp was registered at 70C will try to hit 4.8 this weekend with that voltage if i can manage another fan in push pull config
*farm7.static.flickr.com/6107/6346297598_0f0ea1b54d.jpg
CPUZ by mithun_mrg, on Flickr
*farm7.static.flickr.com/6110/6345547673_3ae322452c.jpg
TEST RUN by mithun_mrg, on Flickr