CPU Overclock List & Discussion Thread

[sumonpathak]

re: CPU Overclock List & Discussion Thread

yep...and ss of the voltage menu

 

[vishalg]

re: CPU Overclock List & Discussion Thread

^^
here is the scrshot

 

[mithun_mrg]

re: CPU Overclock List & Discussion Thread

@Vishal try setting the memory frequency @1066 with tighter timings & use 1.6V during OC

 

[vishalg]

re: CPU Overclock List & Discussion Thread

^^
thanks, runnin ram @1140
no problems now

regarding timings, my defaults are 9-9-9-24 at 1T, what do you suggest??

 

[S_V]

re: CPU Overclock List & Discussion Thread

What's the default speed and Voltage?

EDIT: I got it..... I saw you Sig But Still What is the default Volt.?

you can try using lower timings mentioned in your SPD profile.. To see your RAM SPD profile use CPU-Z and check the timings in 1066... and try to use them... Try to use 8-9-8-24 with default volt.. Don't increase Volt unless using above 1333 or Very lower Tight Timings....

 

[mithun_mrg]

re: CPU Overclock List & Discussion Thread

@vishal can u post a CPUZ SS of the SPD

 

[vishalg]

re: CPU Overclock List & Discussion Thread

@S_V

default volt is 1.3

@mithun
here are the screens

 

[S_V]

re: CPU Overclock List & Discussion Thread

@Vishal

Your default is 1.5 according to SPD not 1.3

Anyway... Try those Timings in SPD profile and do memtest to check their stability. Also Those are Corsair Value Select RAMs and OC is not really good Choice...

 

[sumonpathak]

re: CPU Overclock List & Discussion Thread

allright...try 8-8-8-24 on those sticks @ 1333mhz
@S_V
those sticks are pretty robust for value rams

 

[vishalg]

re: CPU Overclock List & Discussion Thread

UPDATE-
RUNNING ON 8-8-8-24 @ 1T STABLE



@S_V
i thought you were asking cpu volts

@sumon
i cant run 1333mhz stable, hence running 1140

will try both 8-9-8-24 & 8-8-8-24 settings

 

[ysmonyog]

re: CPU Overclock List & Discussion Thread

I do not know OCing but have OCed to 3.71GHz with the help of a step by step tutorial using same mobo and proccy as that of mine.
The BIOS setting are as under:
CPU FSB: 265
CPU NB Ratio: x9
CPU NB Freq: 2385
FSB DRAM Ratio: 1:2.66
DRAM Freq: 1413

The Memory Timings are : 8-8-8-20
Turbo is disabled and CnQ is enabled.
Idling Temp: 26ºC,
System remained stable during 30 min of AMD OverDrive stability test with Max Temp 45ºC (CoreTemp readings).
Two intake fans: 120mm at front and 80mm at side panel.

Though I dont need but is it possible to OC further on air cooling? Also, I want to run RAM at 1600mhz.
As said, I dont know basics of OCing, can someone at TDF guide me in simplified way?

 

[Skud]

re: CPU Overclock List & Discussion Thread

Where do you live? Those temps look awesome to me. You can push even further safely I think. And although I don't much about OCing AMD CPUs, I think CnQ need to be disabled for stable clocks.

 

[ysmonyog]

re: CPU Overclock List & Discussion Thread

I live in Ambala (near Chandigarh). Ambient temp these days is 25-32ºC.
But AS5 and Hyper 212+ installed recently by me has lowered the system temps considerably.

 

[Skud]

re: CPU Overclock List & Discussion Thread

OK, got it.

 

[topgear]

re: CPU Overclock List & Discussion Thread

I do not know OCing but have OCed to 3.71GHz with the help of a step by step tutorial using same mobo and proccy as that of mine.
The BIOS setting are as under:
CPU FSB: 265
CPU NB Ratio: x9
CPU NB Freq: 2385
FSB DRAM Ratio: 1:2.66
DRAM Freq: 1413

The Memory Timings are : 8-8-8-20
Turbo is disabled and CnQ is enabled.
Idling Temp: 26ºC,
System remained stable during 30 min of AMD OverDrive stability test with Max Temp 45ºC (CoreTemp readings).
Two intake fans: 120mm at front and 80mm at side panel.

Though I dont need but is it possible to OC further on air cooling? Also, I want to run RAM at 1600mhz.
As said, I dont know basics of OCing, can someone at TDF guide me in simplified way?

post a couple of cpu-z screenshot of cpu, memory and spd tab

you're fine upto 65C under load - so you can OC even further.

To run your memory modules around 1600 Mhz set the FSB-DRAM Ratio to - 1:3

 

[ysmonyog]

re: CPU Overclock List & Discussion Thread

@topgear
The CPUZ images are attached. (Do not know how to insert in this reply itself).
In FSB-DRAM Ratio options "1:3" is not available
The other options 1:3.33 and Auto raise freq to 1767mhz which I think my memory module can not handle.

 

[mithun_mrg]

re: CPU Overclock List & Discussion Thread

@ vishal sorry dude for the late reply u can try to run the memory at 1036/7-7-7-19-27 tighter timings will increase the performance a little bit over the +110 MHZ

 

[topgear]

re: CPU Overclock List & Discussion Thread

@topgear
The CPUZ images are attached. (Do not know how to insert in this reply itself).
In FSB-DRAM Ratio options "1:3" is not available
The other options 1:3.33 and Auto raise freq to 1767mhz which I think my memory module can not handle.

ok - set the ratio to 1:3.33 and your memory modules will run just fine at 1767 Mhz

 

[ysmonyog]

re: CPU Overclock List & Discussion Thread

ok - set the ratio to 1:3.33 and your memory modules will run just fine at 1767 mhz

bsod

 

[topgear]

re: CPU Overclock List & Discussion Thread

^^ what's the Dram/Memory volt set in Bios ??