CPU Overclock List & Discussion Thread

[d6bmg]

re: CPU Overclock List & Discussion Thread

@mithun_mrg: awesome overclocking with 530. (specially considering your processor)

 

[topgear]

re: CPU Overclock List & Discussion Thread

@ mithun_mrg - 70c is hot enough - if you want to get 300Mhz more speed then the heat generation will be more and it might need additional vcore - so before pushing the cpu speed/vcore any further take care of the cooling part.

 

[S_V]

re: CPU Overclock List & Discussion Thread

Thanks Topgear
@s_v here is the cinebench result crashed twice at 1.376V then i cranked it up to 1.416 memory at 1.6 then is ran max temp was registered at 70C will try to hit 4.8 this weekend with that voltage if i can manage another fan in push pull config

Thanks mate... It's the reason why I asked you to run CineBench 11.5 ..It's very demanding and good choice to see your Processor Speed...

 

[mithun_mrg]

re: CPU Overclock List & Discussion Thread

@mithun_mrg: awesome overclocking with 530. (specially considering your processor)

thanks buddy

@ mithun_mrg - 70c is hot enough - if you want to get 300Mhz more speed then the heat generation will be more and it might need additional vcore - so before pushing the cpu speed/vcore any further take care of the cooling part.

yes thats why i will do that after adding another fan to the cpucooler

Thanks mate... It's the reason why I asked you to run CineBench 11.5 ..It's very demanding and good choice to see your Processor Speed...

ur welcome mate it really is

 

[Reaper_vivek]

re: CPU Overclock List & Discussion Thread

I have a question...I have Hyper 212 plus..and I did buy 2 CM Silent Green LED fans..but when I am using those in Push pull config, the RPM of both fans are 500 apart...The intake one runs at 1800 while the push one is running at 1200-1300...And I think it's not right..as it sort of creates a lot of air around the heatsinks..so is it normal or am I missing something...

Another thing..earlier my temp at idle was used to be 30 to 35C when I OC'ed it to 3.8-4.0 GHz...and now even at 3.2 it idles at 38C...what could be the issue...

 

[asingh]

re: CPU Overclock List & Discussion Thread

^^
That much RPM delta should not make a world of difference. The thermal is a direct function of the vCore being pushed in. Did you increase the vCore.

 

[Reaper_vivek]

re: CPU Overclock List & Discussion Thread

I tried to..and it didn't boot up..I set it to 1.3V...
I was using OC'ed setup for almost a year now, it was all cool and good...and did a reassembly recently, and the temp increased after that...I think I have to check if the cooler is fitted properly..maybe it's too tight..

So u suggest I put the other fan back??

1 more thing with or without the other fan..the temps are the same..no diff at all..

The vcore is set to auto...and I have lowered the clocks to 3.2 now

 

[topgear]

re: CPU Overclock List & Discussion Thread

For the fan RPM just disable the Smart/Automatic fan controll in bios options and let the fans run @ 100% speed.

If mounted properly a push+pull setup should reduce temp rather using a single fan.

Most of the chances the Cooler is not properly mounted on the top of the cpu or it could be the TiM which is making the temp difference - let the Tim some time to settle.

or else you can try some good Tim ( clean the the old Tim from cpu and heatsink ) and see if you can get any temp difference.

 

[mithun_mrg]

re: CPU Overclock List & Discussion Thread

^^exactly @Reaper_vivek get rid of the 3pin to 4 pin adapter supplied with the fans & disable smartfan rpm problem will be solved also dissemble the fan & clean the tim & reapply it & see

 

[Reaper_vivek]

re: CPU Overclock List & Discussion Thread

I did the TiM part carefully..I use an aftermarket one from Cooler master..it cost me 500 bucks..forgot the name :s

Anyways, I'll disable smart fan now and see if there is a diff..
Is the fan speed issue because one is connected to the CPU fan adapter while the other to normal one?
As for the heat prob...I think it's the Cooler setup..maybe I used too much pressure in tightening the screws..as I kept pushing them..maybe I need to loosen them up a bit..

I am planning to go beyond my previous clock of 4.1GHz but am vary of the heat issue...maybe after my exams, I'll spend some time tinkering..

 

[asingh]

re: CPU Overclock List & Discussion Thread

Try not to use auto vCore. It 'may' push in too much. Keep lowering it, till you hit instability.

 

[Reaper_vivek]

re: CPU Overclock List & Discussion Thread

I found this pic of my 4GHz OC on my cooler...it was taken way back in feb...and it was my first OC(yay )...and that too at 1.28V Vcore..pretty sweet..

*valid.canardpc.com/show_oc.php?id=1635374

 

[topgear]

re: CPU Overclock List & Discussion Thread

^^ have a look at here
Overclock3D :: Review :: Intel i5 760 Review :: Test Setup and Overclocking

 

[Reaper_vivek]

re: CPU Overclock List & Discussion Thread

Had read that a while ago..but thanks for bringing it up...

I think I can reach more than 4.2 on my cooler too..Will tinker with it when the exams are over

 

[topgear]

re: CPU Overclock List & Discussion Thread

^^ will be waiting for some extreme cpu clock speed

 

[S_V]

re: CPU Overclock List & Discussion Thread

Comments Please

*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/cpuid.png

*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/cachemem.png


*valid.canardpc.com/show_oc.php?id=2119907

*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/CPUZ.jpg

Temps Testing with Heavy Volts than Necessary

*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/04-Linx645GHZ.jpg

*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/03-OC48_H100_linX.jpg

Some Benchmarks please compare them with yours...

@4.8GHZ
*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/05-Cinebench48.jpg

@ 5 GHZ
*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/06-Cinebench50.jpg


CPUQueen

*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/CPUQueen.jpg

PhotoWorxx

*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/CPUPhotowzz.jpg

CPU Zlib

*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/CPUZlib.jpg

CPU AES

*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/CPUAES.jpg

CPU Hash

*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/CPUHASH.jpg



3Dmark 11 really doesn't like OC Processor... But Winrar Does like it..
*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/12-3Dmark115GHZ.jpg

But 3DMarkVantage Does too
*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/13-3dmarkvantage_CPU5.jpg

 

[mithun_mrg]

re: CPU Overclock List & Discussion Thread

^^ just one word "awesome"

 

[tkin]

re: CPU Overclock List & Discussion Thread

@ S_V, try pushing for higher memory(6144) in LinX, use the latest linpack binaries, else you can't get a proper Gflops comparison, my system at stock(3.5GHz)*

*i.imgur.com/Ld2Of.png

*i.imgur.com/PSh2h.png

* I'm considering Gflops rating depend on available memory amount, if not then your Gflop rating is too low.

 

[S_V]

re: CPU Overclock List & Discussion Thread

@tkin...

I know my Glops is less ... I am not running LinX with AVX instruction sets. So that's one of the reason I am getting low Glops... It's not exactly the amount of RAM you have...

EDIT : Please check the following tests i have done, with your Processor also and let me know the scores... I saw immense performance in all applications as well as games in my PC..

@tkin...

here it is... with LINX with AVX sets... I ran with Stock for now....

*img.photobucket.com/albums/v358/sunil_9/Benchmarks/Benchmarks/LinX_AVX.jpg

 

[tkin]

re: CPU Overclock List & Discussion Thread

Its ok, and you're not running on stock, cause on stock with all 4 cores engaged sandy is supposed to oc to 3.5Ghz NOT 3.8GHz. Here's Sandy Turbo:

Turbo can provide a 400Mhz speed boost in single-threaded workloads, 300Mhz in dual-threaded workloads, 200Mhz in triple-threaded workloads, and 100Mhz in applications that utilize four threads or more.

PS: H100 is nice cooler btw.