CPU Overclock List & Discussion Thread

max_snyper

max_snyper

Maximum Effort!!!!!!
CPU : Intel 2500k
Revision : D2
FSB/BCLK :100
Multiplier :42
Vcore set in bios : 1.25
Vcore CPU-Z : 1.256
Cooler : Corsair H100 (performance mode)
Additional notes If any : Offset set on vcore : -0.030

Motherboard : Asus Z68 V-pro
Chipset : z68
Bios Version : 3203
Additional notes if any : Latest bios

Ram Type and Speed : 1600mhz
Timings : 9-9-9-24-2t
Volt : 1.25
Additional notes if any : All settings default except the vcore & Core clock.

*img856.imageshack.us/img856/3016/testzcl.jpg
 
sukesh1090

sukesh1090

Adam young
CPU :AMD Phenom IIX4 955BE
Revision :RB C3
FSB/BCLK :200
Multiplier :21.5
Vcore set in bios :1.5v
Vcore CPU-Z :1.488v
Cooler : CM Hyper 212 Evo
Additional notes If any :4.3 GHz is stable with cinebench but crashes with 3D mark vantage.but 4.2 GHz is completely stable with both of them @ 1.475v.

Motherboard :Gigabyte GA 880GM-USB3
Chipset : 880G-SB700
Bios Version : FE
Additional notes if any :

Ram Type and Speed : Corsair vengeance DDR3 1600MHz
Timings : 9-9-9-24-1t
Volt : 1.5v
Additional notes if any :

pics,
*imageshack.us/a/img542/9760/desktop2013010423260521.jpg

*imageshack.us/a/img845/792/desktop2013010423320475.jpg

guys what do you think,is it safe to go above 1.5v vcore as i still have temp headroom(its 58C at load and don't worry about winter its as hot as summer here and also i am using single fan for cooler so another fan will reduce temp and also my 400R can some more case fans.:wink:)
btw it booted at 4.4GHz @ 1.5v without any problem.may be it will boot even at 4.6GHz without any problem.
 
Last edited:
OP
topgear

topgear

Super Moderator
Staff member
^^ you have got an excellent chip but don't go over 1.55v - thye 4.3Ghz should be stable at 1.5v though.

@ max_snyper - 4.2Ghz and the Corsair H100 ? you can take your cpu for a wonder ride - set it at least 4.8 Ghz and see how the cooler holds up.
 
S_V

S_V

In the zone
@sukesh1090

Nice Bench.... With 4.3 Ghz the Cinebench Score is 5.05? I thought it will be much more than that.

@max_snyper

To know your Overclock stable or not... Just run Cinebench 11.5 once. If it is done successfully then it's almost 95% stable..... :-D

Just kidding...Burn Tests are must but Cinebench will crash your systems if overclock is not stable.
 
Skud

Skud

Super Moderator
Staff member
Re: CPU Overclock List & Discussion Thread

Just a short run:-

CPU-Z Validator 3.1

*valid.canardpc.com/cache/banner/2642507.png

*valid.canardpc.com/cache/screenshot/2642507.png
 
Skud

Skud

Super Moderator
Staff member
Slightly better than last year's results. ;)

Here's the only screenies:-

*i.imgur.com/JLEDI.jpg

*i.imgur.com/euBmV.jpg
Temps are not an issue atm in Lucknow. :razz:
 
OP
topgear

topgear

Super Moderator
Staff member
@ Skud - blistering speed ;-) - tried some game with it and planning to keep this OC throughout this winter ?
 
Skud

Skud

Super Moderator
Staff member
Nah, a bit worried with the volts, just wanted to see if I can push it further than last year. ;)
 
Myth

Myth

Cyborg Agent
lol. The min temp is 27.
The 1.472 vcore seems a bit high. How far can the 2600k go on default vcore ?
 
d6bmg

d6bmg

BMG ftw!!
Skud said:
Nah, a bit worried with the volts, just wanted to see if I can push it further than last year. ;)
Click to expand...

1.45 is a bit on the higher side, but safe for short time gaming.
P.S. haven't you ran P95? If you already have, then you shouldn't worry about gaming.
 
Skud

Skud

Super Moderator
Staff member
topgear said:
cool, why not try 4.5 Ghz as that's the norm ;-)
Click to expand...


Need a slight voltage bump for that, don't want it. 4.3 GHz is the max I can get with stock volts (not Auto) and turning PLL overvoltage off etc. while keeping everything stable.
 
You must log in or register to reply here.
Top Bottom