Basic Guide Purchase a New System

Status
Not open for further replies.

keith_j_snyder2

Rising ApocalypsE
thats way too high man..

but why .. dont you think geforce more compatible with nvidia 630a chipset
and 2ndly .. AMD 690G is around for ages .. 630a+7100 is comparatively new chipset

So true, but u know when u are using an additional graphics card then what chipset, hardly matters.
nVidia 630i chipsets doesn't supports Dual Channel operation where as 690G does!
Although Dual Channel gives a mere boost in performance but its an advantage after all.
Some games gives almost 10-15 FPS more in Dual Channel!

if buying 8800 then yeah normal psu may not even start :lol: but bro, cheapest 450 watts of Rs. 350/- can drive Q6600 @ 2.8 ghz :lol: with 4 gb ram and 8600 :lol:

For sure! But those 450W are not true 450W and also not as much efficient as the branded ones.

I used to have a navtech 450W that came with cabinet but i switched to Cooler Master extreme 430W. Also branded PSU has more Amps. which is good for the hardware.

Compare a local 600W PSU and a CM xtreme 600W PSU. U will also find that they have more sockets i.e SATA,molex! SO that they can give true power to the behemoths!
 
Last edited:

j1n M@tt

Cyborg Agent
^^ I think Zebronics 500W Platinum is d better cheapest solution for a normal gud rig than wasting money for CM PSUs
 

Debajyoti

Broken In
after buyin my latest DABBA with asus m2a vm and amd 5200+ with 2 gb ram i face one problem after connection with my monitor - samsung syncMaster 794mg
every time i start my computer i got a worning

H?W monitor have some problem .please run del to go into setup or F1 to continue

when i everr i go for setup in h/w Monitor setting their is a 3.3 voltage error which's parameter is 4.4volte and colored red.
their is only one option useing +/- that is ignore.

if i set it to ignore.that worning not comming but their iare some "FOTT!" sound while start in and shut down and also sometime monitor goese completely black for a few swconds..

please help me to resolve this problem !

urgent help needed!.

thanx in advance.
 

spikygv

Wise Old Owl
my frend has a budget of 20k to buy proccy , hdd , mobo , gfx card and ram

my suggestion :

c2d - e6550 7k
xfx 630i 3.5k
2 gb ddr2 800 - 2k
galaxy 8600 - 5k
160gb hdd - 2k
local psu - 0.5k

that comes to 20k.
any suggestions ?
 
OP
Choto Cheeta

Choto Cheeta

Rebooting
that comes to 20k.
any suggestions ?

Try to push for ABiT IP35-E which is Rs. 5200/- + TAX or even Galaxy 650i Ultra :) when u are buying a grfx cardn then no mean of 630i as it comes with onboard grfx which is a waste and there are no Dual Channel support on it :(
 

s18000rpm

ಠ_ಠ
time has come, to order the stuffs:))

=> CoolerMaster 650W RS-650-ACAA-A1

=>NVIDIA, G92 core 8800GS (~$150)

=>Hitachi 350/500GB HDD.

=>Corsair TWIN2X2048-6400 - PC2-6400 - 2GB Kit 5-5-5-18.

should i buy this 2 GB kit, or go for 2x2GB kit (4GB kit) & what about other brands?

=>now suggest Newbie friendly Overclocking m/b.
 
Last edited:

dOm1naTOr

Wise Old Owl
@s18000rpm
hi dude
8800GS is just waste of money.
Its just haf poerful as 8800GT.
In that case MSI HD 3850 256 for 160$ is much much better than that.
And 2G is enuf to keep an 8800GS or 3850 happy.
get a gud latency 2 GB kit. It wud perform better than 2*2G normal 800 as far as u dont play at extreme high resolutions[but those cards cant handle that]
and 3850 can be put to extreme oc. upto 180Mhz improvement on core and 200 Mhz on memory can be achieven nd it surpases 3870 in performance.
And the 512 MB version wud be better and is for some 190$
 

dOm1naTOr

Wise Old Owl
8800GS has 65mn GPU and 3850 has 55nm GPU. SO the 55nm can be oced much better.
And in stock speeds also, 3850 beats 8800GS hands down.
And with newer catalyst releases, the performance of HD 3xxx cards are increasing like hell. The performance is limited only coz of driver limitations and no game optimaisations done for ATI.
Theoritically HD 3850 has 320 shader units where even 8800GTX has only 128. But it not optimally used by games due to lack of optimisation, and nvidia seems paying every developers to optimise for nvidia. See the "way its meant to be played" logo on most of 2days game launches?

But ATI is trying to retify the lack of optimisations thru gud drivers, nd they are working gr8. eg:
catalyst 7.11 reviews are the one available whole over net. But with 7.12 things changed gr8ly. But with tha last week release of 8.1, the performance has improved very much.

And also with the HD 3850 cards u get an HDMI connector too and its a DX 10.1 card and has PCIE 2.0 interface which is backward compatiblw with 1.1.
nvidia's DX 10.1 card aka 9600GT is just on its way but as of reviews available, 8800GT is better.
 

spikygv

Wise Old Owl
Try to push for ABiT IP35-E which is Rs. 5200/- + TAX or even Galaxy 650i Ultra :) when u are buying a grfx cardn then no mean of 630i as it comes with onboard grfx which is a waste and there are no Dual Channel support on it :(

ok . thanks . i did think of abit ip35 E but i wonder his budget will allow it .
is it better to buy ip35e+8600 now. . or 630i and get a gfx card later . say 3850 or 9600 when it comes to his budget range ?
 
OP
Choto Cheeta

Choto Cheeta

Rebooting
is it better to buy ip35e+8600 now. . or 630i and get a gfx card later . say 3850 or 9600 when it comes to his budget range ?

Try for IP35-E even if that mean u are forced to buy XFX 8400 GS which is Rs. 2100/- + TAX :)...

630i lacks dual channel support :) when thinkling high end system for performance then try to stay out of it :) the board is only good when some one has no plan for gaming how ever its an inter OC solution for Ripping videos or such :)
 

spikygv

Wise Old Owl
thanks choto . supposing he takes ip35e + 8600 . is a local 450W psu enough ?

my p4 + 8600 wasnt satisfied by local 450W . voltage on 12 volt used to fall while gaming and pc wud turn off many times while gaming.
 
OP
Choto Cheeta

Choto Cheeta

Rebooting
P4 are more power hungry than C2D :lol: anyway iBall 450 wattts does fine with 8600 and E6600 :) so would run fine with ur config too :lol: but do keep an option or thought open for Zebronics Platinum 500 watts which is around Rs. 1500 :), with cabinet it costs Rs. 2200 :)
 

spikygv

Wise Old Owl
i know p4's are power hungry . . . no wonder , the high noise of the fan . .i hope that local smps will be enough for him coz he's already extending his budget .

thanks for the quick reply's choto .
choto , cud u test smps's in 2k-3k range. quite a lot of people say to stay away from zebby pure platinum . some say to go4 VIP , others powersafe and then there is colorsit .. so wats the best smps in that price range .
it will be gr8 if u cud do a review on that.
 

vps85

Broken In
Is this price correct?

Hi,

I just bought this config from my local vendor here

Intel core 2 Duo 2.2 Ghz
Intel DG33FB
Kingston 2GB @800Mhz DDR2
Seagate 250GB @7200rpm
Zebronics Cabinet + 450W SMPS
XFX Geforce 8600GT 256MB DDR3
APC 500VA UPS

Total : 25,250 INR

he didnt give me the individual pricing.

and also tell me the performance of this config... will i able to play Doom3/HL2 ? crysis ??
 

Pathik

Google Bot
Pricing is decent. You should have got it in ~23k if you wd have done it yourself. Yep you ll be able to play Crysis @ medium settings no AA/AF.
 

keith_j_snyder2

Rising ApocalypsE
8800GS should be almost same as 3850pro because 3870 performs same as 8800GT. So 3850pro vs 8800GS shall remain same but all that matter is AA & AF in which nVidia takes it all!
That whats only matters to me!
 
Status
Not open for further replies.
Top Bottom