Post your latest Purchase

CyberKID

CyberKID

In search for Tech Gyan!
Thanks Guys!
Got the Cooler Master Hyper TX3 EVO CPU cooler from flipkart today in the afternoon. Must say, superfast shipping. Got it well within 30 hrs. I found the cooler installation mechanism, a bit cumbersome, than the screw ones found in the old coolers.

*i.imgur.com/Z5PC9l.jpg

All this for a P4 machine.
 
sjoardar

sjoardar

Go Ahead, Make My Day!
CyberKID said:
Absolutely not.:razz: I know that that pic was a bit too dull and of poor quality. Thought to change the pic. Will upload a good quality one ASAP.:)
Click to expand...

I appreciate your open mind. By the way, my advice was only for highly reflective subjects, like your monitor in question. More specifically, one needs to shoot only at a small angle off the perpendicular to the monitor. No need to shoot at a large angle off the perpendicular to the monitor.
 
Allu Azad

Allu Azad

Time Ruins Everything
CyberKID said:
Thanks Guys!
Got the Cooler Master Hyper TX3 EVO CPU cooler from flipkart today in the afternoon. Must say, superfast shipping. Got it well within 30 hrs. I found the cooler installation mechanism, a bit cumbersome, than the screw ones found in the old coolers.

*i.imgur.com/Z5PC9l.jpg

All this for a P4 machine.
Click to expand...

Is that a normal mAtx cabinet ?
 
ankit.kumar010203

ankit.kumar010203

Journeyman
MANY MANY CONGRATULATION.....!!! Do You Know Micromax Is Launching FUNBOOK PRo....So Why You Bought This? :-? Micromax to launch 10.1-inch ICS-based Funbook Pro tablet - Tablets

Can You Tell Me Which Internet Dongle Are You Using For This???:|:|
 
CyberKID

CyberKID

In search for Tech Gyan!
Allu Azad said:
Planning to buy this . I have a matx cabby too .

Any temp decrease u noticed ?
Click to expand...

Yup! The CPU temp is well below 50 degrees on load and have noticed it at max 55 degrees, while my stock cooler managed it at around 65-67 at max(without OC). That's way below what I got from my stock cooler (almost 10-12 degrees less at current max temp). Mind you, I'm still using is an EE Pentium 4 processor overclocked to 3.63 Ghz.
If you're considering purchasing one, be aware that the cooler retention clips (the clips to fix it to the motherboard) as I feel, are not good as compared to what the older stock had(screws with spring and a base plate at the back side of the mobo to fix it).
 
Last edited:
elton_1991

elton_1991

Broken In
Got NZXT Phantom @ 7.3k and Corsair H60 @4.4k :-D
*www.dropbox.com/s/i893jtzj9eymhiy/20120727_192317.jpg

*www.dropbox.com/s/k4hme8nuesu6fiz/20120727_193022.jpg

*www.dropbox.com/s/ipdr60fyjmdle0m/20120727_195434.jpg

*www.dropbox.com/s/wgojy9eap1raapl/20120727_195840.jpg
 
N@m@n

N@m@n

Journeyman
elton_1991 said:
Got NZXT Phantom @ 7.3k and Corsair H60 @4.4k :-D
*www.dropbox.com/s/i893jtzj9eymhiy/20120727_192317.jpg

*www.dropbox.com/s/k4hme8nuesu6fiz/20120727_193022.jpg

*www.dropbox.com/s/ipdr60fyjmdle0m/20120727_195434.jpg

*www.dropbox.com/s/wgojy9eap1raapl/20120727_195840.jpg
Click to expand...

congrats..
 
NIGHTMARE

NIGHTMARE

ANGEL OF DEATH
Purchased Karbon Kurve Dual Sim, replaced my intex dual sim phone. Nice phone sleek desgin.

*i.imgur.com/MYPtd.jpg
*i.imgur.com/uswFx.jpg
*i.imgur.com/fzIRR.jpg
*i.imgur.com/dJuiW.jpg
*i.imgur.com/fCV0Q.jpg
 
You must log in or register to reply here.
Top Bottom