second photo is the setup.
the speaker is connected to Yamaha av receiver.
my ps3, ps4, and desktop are connected to the receiver.
once i clean the room i will post another photo.
Appears to be an oscillioscope, isn't it? Congratulations! I've got updates on my solar project. Will be updating the LED thread soon with new updates.
Polk Audio TSX 150C
Much needed component for my home theater.
This thing is massive but its got a sweet sound.
*i.imgur.com/m7mQhXQ.jpg?1
*i.imgur.com/xHVhuH1.jpg
Appears to be an oscillioscope, isn't it? Congratulations! I've got updates on my solar project. Will be updating the LED thread soon with new updates.
yup, thanks. i have also purchased a huge lot of 1watt & 0.5 watt leds, will slowly slowly try to put them at different parts of house, just thinking a way to efficiently drive them from 12/6v source !
ripple from a wall wart 12v smps, on ~600mA linear load : its noisy, too many frequencies, so, i guess triggering was a bit difficult with this substandard 10MHz scope. The main is 100KHz, but if looked closely, the rising edge has very low duration high freq MHz level ripples, with amplitude in 10s of volts.
*i.imgur.com/QC6lMcg.png
clean signal, from the 1KHz calibration port is very clear though
*i.imgur.com/wGG9P1E.png
its the most basic as it gets, 10MHz analog, good for basic studies of modulation, basic power supply design and valuation, audio amplifier design, testing & debugging and for probing into not so high frequency stuff. i want to get a DSO of 100-200MHz in future, but before that wanted a CRO for cheaper price.
it was 8k at urjakart, the HTC model. after i bought they not only reduced the price, but also included cheaper MetroQ model - same stuff from same/different chinese factory perhaps, but different indian brand names. geez, i could have saved ~1.5k with metroq model.
this is substandard to the standard 20-30MHz stuff people use at colleges, but it's okay with me for now.
i m also aware of the usb ones, but people suggested to get dedicated ones, they even warned me to get at least 20MHz models, but i didn't listen.
Appears to be an oscillioscope, isn't it? Congratulations! I've got updates on my solar project. Will be updating the LED thread soon with new updates.
Congos, Moy. What's the max bit size it can take? Recently I realized that a Dremel 7000 would have been a much better bet than my Skil drill I bought around 2 years back
I had planned to build a dual axis solar tracker. Work on it is now midway, nearing completion. Apart from that, I've started utilizing the 40watt solar panel I bought some months back.
Damages is when you regret buying something or wont remember the time.
Like you go to a bar and they hand you over the bill in an envelope that says Damages
Hi Guest we just wanted to alert you to a major change in the forum. We will no longer be allowing the posting of outgoing links. Please use the attachment feature to attach media to your posts.