Pc for 12k ?

OP
clmlbx

clmlbx

Technomancer
^may be but her it will not be priced less then 4300-4400 If i found it.

that biostar 1 too if I found it will around 3900.. here prices are always 200-300 more then we see on that sites.

---------- Post added at 10:08 AM ---------- Previous post was at 10:02 AM ----------

well but here will be my final config

Athlon 2 x4 635
mother board still looking
transcend / kingston 2 gb DDR3 ram
Western digital 500gb hard-disk
Lg dvd writer
Logitech combo
Zebronics bijli.
Samsung 20 inch lcd (model still to decide)
 
OP
clmlbx

clmlbx

Technomancer
Hey guys I found Gigabyte dealer

GA-MA785GMT-US2H will this fit properly in zebronics bijli .. back panel

and gts 250 and tagan 500w too will have no probelm with bijli and that motherboard
 

Piyush

Lanaya
dont go for asus nowadys
in the end u'll be the sufferer
msi/gigabyte/biostar
anyone above will do
 
OP
clmlbx

clmlbx

Technomancer
will gts250,tagan smps and this mb GA-MA785GMT-US2H or Biostar TA785G3 Hd will fit in zebrinics bijli... specially that MB

and hope no compatibility issues with that mb and gts 250
 
Last edited:

Piyush

Lanaya
yes they will fit with ease
however u can go for CM elite 310 available at 1.4k
and why tagan?
is this the only brand available?
 
OP
clmlbx

clmlbx

Technomancer
I already own Tagan and gts 250 so that is

that cm elite does not come with smps and I need smps

see what I am goint to do

I already got

c2d 1.8ghz
Intel d946gzis MB
2gb transcend ram
160 gb hard-disk
gts 250
tagan smps
samsung 17 inch crt monitor
Microsoft keyboard and Logitech mouse

that is all I am using now

Now what I am going to buy now is

Athlon 2 x4 635
GA-MA785GMT-US2H or Biostar TA785G3 Hd (which ever I am going to find )
kingston 2 gb DDR3 ram (kingston bcoz localy support available)
Western digital 500gb hard-disk
Lg dvd writer
Logitech combo
Zebronics bijli.
Samsung 20 inch lcd

I will add gts 250 and tagan to it ..and that smps which will come with bijli will add that to my old pc..and that will go to my brother which need pc for entertainment... but I need pc for some 3d work.
 

Piyush

Lanaya
I already own Tagan and gts 250 so that is

that cm elite does not come with smps and I need smps

see what I am goint to do

I already got

c2d 1.8ghz
Intel d946gzis MB
2gb transcend ram
160 gb hard-disk
gts 250
tagan smps
samsung 17 inch crt monitor
Microsoft keyboard and Logitech mouse

that is all I am using now

Now what I am going to buy now is

Athlon 2 x4 635
GA-MA785GMT-US2H or Biostar TA785G3 Hd (which ever I am going to find )
kingston 2 gb DDR3 ram (kingston bcoz localy support available)
Western digital 500gb hard-disk
Lg dvd writer
Logitech combo
Zebronics bijli.
Samsung 20 inch lcd

I will add gts 250 and tagan to it ..and that smps which will come with bijli will add that to my old pc..and that will go to my brother which need pc for entertainment... but I need pc for some 3d work.

so make this deal the final one
it looks decent
and CM 310 comes with smps if asked
but that smps is CM extreme series one and should be avoided
 
OP
clmlbx

clmlbx

Technomancer
Finally I bought

Athlon x4 635
kingston 2gb ddr3 1333mhz
Gigabyte ma785gmt-us2h
Logitech combo
sata lg dvd writer
wester digital green 500 gb 32 mb
samsung b2030
Zebronics circle

but now I am facing few problems

first I was using windows 7 x64 so I installed that only but installtion was damn slow

at time of installation
why ?

my hard-disk and writer(I guess) is working in a ahsci mode what is this?

then at time of installation when I tried to make partition (last1) then no option was enabled all were greyed out.. I made 4 100gb and last 65gb well tried too but that 65 gb did'not work.

then I installed win 7 (took lot of time) pls some1 explain to me this (took almost 20-30 mins) then from windows I tried to make that partition.. then I saw my all 4 partitions are primary and last 1 still gave some message here are screen shots

---------- Post added at 08:55 PM ---------- Previous post was at 08:41 PM ----------

*i37.tinypic.com/v7fx4g.png

*i36.tinypic.com/n683sy.png

---------- Post added at 09:01 PM ---------- Previous post was at 08:55 PM ----------

after clicking yes

*i33.tinypic.com/2h2o0sk.png
 

coderunknown

Retired Forum Mod
congrats on the buy. how much did it cost? for each item. about the above issue, i not sure but are you trying install 64bit windows?
 
OP
clmlbx

clmlbx

Technomancer
yes it is 64 bit

Athlon x4 635 @ 5150
kingston 2gb ddr3 1333mhz @ 2475
Gigabyte ma785gmt-us2h @ 5500
Logitech combo @ 675
sata lg dvd writer @ 975
wester digital green 500 gb 32 mb @ 1975
samsung b2030 @ 6500
Zebronics circle @ 1050
logitech R-5 speakers @ 400
 

coderunknown

Retired Forum Mod
price is nice for everything except mobo. anyway 2Gb a bit too less for 64bit. try 32bit. i not seen anyone running 64bit in pc/lappy with less than 3Gb ram. that maybe the culprit. about the HDD thing, will have to look cause my config is exactly same.
 
OP
clmlbx

clmlbx

Technomancer
that(mobo) is lowest I got.. what should be the price of that mobo .. here I got rates upto 5700-5800..

64 bit is good for computing too... I guess it will show difference in Photoshop,max maya, after fx, premiere..

have u also made 100gb partitions ...specially what have us set in Bios. Is it ahsci only..

maybe becoz I made all partitions in win 7 installation time.

I forgot to mention it seemed in installation that it hanged at few steps .. like after loading files and starting windows logo it hanged (well looked like but keyboard and mouse were working) befor that langauge screen comes up..

In ahsci mode it loads files very fast super fast..like in 20-25 seconds but in othere modes it take around 30-40 seconds
 
OP
clmlbx

clmlbx

Technomancer
well Whatever the problem was seem to be solved as now I booted from win dvd and thn all when well as it should be.. may be after Partition got converted to dynamic .. It is all going well .

Thanx to all of u guys who helped ..
 
Top Bottom