need the best possible PC for 60,000/-

[Deleted member 26636]

i need a configuration for rs60,000/-. it should include everything except the mouse & speakers. i.e i want monitor, keyboard, cabinet, PSU, HDD, RAM, M/B, Processor, GFX card & DVD-RW. my main purpose is 3D work(running max & maya, specially for rendering) with some gaming on the side. so i do not want a quadro card.a high end geforce or radeon is preferred.i am not biased towards intel or AMD so i would like to see both options.this PC need not be highly future proof but should have adequate upgrade possibility.i am not going to overclock anything.please provide both intel & AMD configs for comparison. thank you.

 

[Cilus]

Here goes your config:

Phenom II X6 1055T 2.8GHz @ 9.4k
MSI 880GMA-E45 @ 6k
RAM: 2 X 2 GB Kingston 1333 MHz DDR3 @ 5.1k
HDD: Seagate Barracuda 7200.12 1TB @ 3.4k
Monitor: BenQ 22" G2220 FULL HD LCD Monitor @ 7.5k
Cabinet: Zebronics Reaper @ 1.7k or NXT Gama @ 2k
PSU: Cooler Master GX-650W @ 5.5k
Gfx card: Palit HD5850 1GB GDDR5 @ 15.5k
Keyboard & Mouse: At your choice @ 1.2k
Optical Drive: LG 22X SATA DVD Writer @ 1k

Total is around 56.6k. You can go for some good 120mm Cooler master fans at 1k.

 

[furious_gamer]

AMD Phenom II x6 1055T @ 10.2k
MSI 890FXA-GD70 (AMD 890FX) @ 10k
Corsair XMS3 4GB DDR3 1333MHz @ 6.2k
MSI HD5850 @ 15.5k / MSI HD5770 @ 9k
Corsair VX550W @ 4.8k
Cabinet - Ur Choice
WD Cavier Green 640GB @ 2.8k
AOC 20" @ 6.3k / BenQ G2220 @ 7.8k
Any DVD-RW @ 1.3k

 

[Deleted member 26636]

can you please suggest nvidia gfx cards also?i've had problems with ATI when it came to 3d work(personal experience, nvidia geforce somehow seems to fare better).also since it supports 3d vision & my friend may eventually upgrade to a 3d monitor, so nvidia seems like a good choice.how is the monitor Dell ST 2210 compared to benq G2220?also what other options do i have between MSI 890FXA-GD70 & MSI 880GMA-E45?how is the MSI NF980-G65? the 890FXA has a lot of upgrade potential which isn't really necessary.maybe i can save a bit on the m/b?also 3gb RAM would be enough for now.

 

[Cilus]

ya, I know, initially ATI cards were having lots of issues. There were bugs in their drivers and some heating problem too. My 1st two cards were from Nvidia, 6800 ULtra and 8800 GTX. But now the thing has been changed completely. And the price point of 16k, HD 5850 is unbeatable. It performs far better than Nvidia's offering GTX 465 @ 16.5k and comparable to GT 470 available @ 22k. It requires less power, generate less heat and much stable in loaded condition. Most of the competing Nvidia cards are having Heating issues in high load. Do some googling and find it out by yourself.
The only option available from Nvidia is MSI GTX 465 1024MB GDDR5 @ 16.5k, performs almost same (marginally better) as Radeon HD 5830 @ 14.5k.

 

[SlashDK]

Here goes your config:

Phenom II X6 1055T 2.8GHz @ 9.4k
MSI 880GMA-E45 @ 6k
RAM: 2 X 2 GB Kingston 1333 MHz DDR3 @ 5.1k
HDD: Seagate Barracuda 7200.12 1TB @ 3.4k
Monitor: BenQ 22" G2220 FULL HD LCD Monitor @ 7.5k
Cabinet: Zebronics Reaper @ 1.7k or NXT Gama @ 2k
PSU: Cooler Master GX-650W @ 5.5k
Gfx card: Palit HD5850 1GB GDDR5 @ 15.5k
Keyboard & Mouse: At your choice @ 1.2k
Optical Drive: LG 22X SATA DVD Writer @ 1k

Total is around 56.6k. You can go for some good 120mm Cooler master fans at 1k.

Change
the motherboard to MSI 890GXM-G65 at 7.2k
PSU to corsair TX650 at 6.5k
HDD to WD caviar green 1 TB at the same price (Western Digital drives have been found to be more reliable)
Mouse to Logitech MX518 (gaming mouse) at 1.5k
keyboard of your choice for 0.5k

and you're good to go

 

[Deleted member 26636]

i do not want to debate about it but i have personally faced problems with my hd4850 while working with large complex scenes in maya...viewport rendering isn't as smooth as nvidia(i know this as my friend has a gt 240)his viewport rendering is much smoother than mine.i know rendering engines such as mental ray rely more on RAM & CPU power than actual GPU(onlya few rendering engines such as octane GPU renderer actually rely on GPU).also most of the times when i've rendered a scene that used the SSS shader, maya would crash.i am not going for a quadro or a fireGL as these cards pretty much suck for gaming(although performance in 3d work is far better).so to keep a balance between 3d & games, nvidia seems a better choice.this is why i asked about nvidia? how are the gtx 285 or gtx 295 cards in comparison to the gtx 465, 470 or HD 5850?

---------- Post added at 05:07 PM ---------- Previous post was at 05:02 PM ----------

EDIT: didn't see your reply. don't you think the TX650 would be overkill?also i already mentioned that i do not need a mouse.please read my post & tell me what options i have in Nvidia?

 

[SlashDK]

TX 650 is overkill but its better to be safe than sorry. A vx550 might be able to take the load of the system but i'm not sure. As for nvidia i'd recommend you wait for gtx 460.
As per reviews its cooler, smaller and better performing than gtx 465 and should be a bit cheaper than HD 5850. Although it has been found that hd 5850 is better than gtx 460 and this increases with the higher your resolution.

---------- Post added at 06:35 PM ---------- Previous post was at 06:16 PM ----------

didn't find anything about rendering on the net but found a good motherboard for 1k cheaper. only downside is you don't get USB 3 and SATA 3. MSI 790GX-G65

 

[coderunknown]

Here goes your config:

Phenom II X6 1055T 2.8GHz @ 9.4k
MSI 880GMA-E45 @ 6k
RAM: 2 X 2 GB Kingston 1333 MHz DDR3 @ 5.1k
HDD: Seagate Barracuda 7200.12 1TB @ 3.4k
Monitor: BenQ 22" G2220 FULL HD LCD Monitor @ 7.5k
Cabinet: Zebronics Reaper @ 1.7k or NXT Gama @ 2k
PSU: Cooler Master GX-650W @ 5.5k
Gfx card: Palit HD5850 1GB GDDR5 @ 15.5k
Keyboard & Mouse: At your choice @ 1.2k
Optical Drive: LG 22X SATA DVD Writer @ 1k

Total is around 56.6k. You can go for some good 120mm Cooler master fans at 1k.

got a few suggestions:

1. the motherboard is good & cheap. else get the 890GX mobo from MSI.
2. get WD 500Gb green + 500Gb Black. one to render to & one to render from. performance increase is worth the extra cost.
3. get Corsair VX550W.
4. @himadri, better wait a couple of weeks. get GTX460 1Gb based card. suite your work. or you may get the same HD5850 for 13.5k or 14k than.

TX 650 is overkill but its better to be safe than sorry. A vx550 might be able to take the load of the system but i'm not sure. As for nvidia i'd recommend you wait for gtx 460.
As per reviews its cooler, smaller and better performing than gtx 465 and should be a bit cheaper than HD 5850. Although it has been found that hd 5850 is better than gtx 460 and this increases with the higher your resolution.

Dell sells the XPS 7100 with HD5870 & X6 1055T powered by a Delta 460W PSU. remember that.

 

[shravan.kale]

Go for an i7 processor....multi-threading will be of good help....for 3D work

 

[Deleted member 26636]

thanx Sam.Shab....i think i'll go with the 890GX....500Gb HDD will be enough...& i think the corsair vx 550w will also be enough.i think my friend might wait for a better graphics option though.is there any intel based system that you can recommend?

 

[coderunknown]

thanx Sam.Shab....i think i'll go with the 890GX....500Gb HDD will be enough...& i think the corsair vx 550w will also be enough.i think my friend might wait for a better graphics option though.is there any intel based system that you can recommend?

with Intel, you simply have to switch the processor from X6 to i5 (else total cost will overshoot budget) & mobo to either H55/H57/P55. but in rendering, X6 + Nvidia looks good (until AMD slash graphics card pricing by a descent amount). also the card runs cooler (a bonus)

 

[Deleted member 26636]

ok.....so i'll go with the AMD setup...what do you think about 3d Monitors...my friend wants to buy a digital 3d system with the Nvidia 3d Vision Kit & Samsung Sync Master 2233RZ monitor.so now he is willing to wait a while for the GFX card.so now the config is- AMD Phenom II X6 Processor [ Model 1055T ]----------- Rs:10327/-
MSI 890GXM-G65--------------------------------------- Rs:7035/-
Corair PSU-550VX----------------------------------- Rs:4568/-
Corsair 1333 Mhz DDR3 3GB RAM--------------------- Rs:4400/-
WD 500GB Black --- Rs:2678/-
NZXT Gamma------------------------------------------- Rs:2030/-
HP DVD-Writer Model 1260i - ----------- Rs:1300/-
Samsung Sync Master 2233RZ monitor--------------------Rs.23100/-
Nvidia 3d Vision Kit- Rs.8400/-
Keyboard- Rs.500/-

The total setup is now at Rs.63828/-.he is willing to extend his budget but only for the extra digital 3d hardware. is there any alternative 3d display available?
what do you suggest?

 

[coderunknown]

ok.....so i'll go with the AMD setup...what do you think about 3d Monitors...my friend wants to buy a digital 3d system with the Nvidia 3d Vision Kit & Samsung Sync Master 2233RZ monitor.so now he is willing to wait a while for the GFX card.so now the config is- AMD Phenom II X6 Processor [ Model 1055T ]----------- Rs:10327/-
MSI 890GXM-G65--------------------------------------- Rs:7035/-
Corair PSU-550VX----------------------------------- Rs:4568/-
Corsair 1333 Mhz DDR3 3GB RAM--------------------- Rs:4400/-
WD 500GB Black --- Rs:2678/-
NZXT Gamma------------------------------------------- Rs:2030/-
HP DVD-Writer Model 1260i - ----------- Rs:1300/-
Samsung Sync Master 2233RZ monitor--------------------Rs.23100/-
Nvidia 3d Vision Kit- Rs.8400/-
Keyboard- Rs.500/-

The total setup is now at Rs.63828/-.he is willing to extend his budget but only for the extra digital 3d hardware. is there any alternative 3d display available?
what do you suggest?

GTX460 will support 3D but the pricing for now is really high for the monitors. also let the quality will improve ver time. maybe won't require the glasses.

get 4Gb ram. 2X2Gb. dual channel.

about 3D i don't have any good idea

 

[Deleted member 26636]

thanx for the help....i'll let you know when the config is finalised.

 

[rajan1311]

had done a guide for such PCs some time back and recommended the same config as the guys here. Just a little confused on the graphics as none of these graphics cards will help you much with rendering. Anyone here tired softmoding ?

 

[mavihs]

ATI 5000 series are way better (also compared to 4800 series) in rendering wise! lots of my friends are your it for rendering!

 

[Deleted member 26636]

so i've decided upon this config with a budget of Rs.70,000/-

1.Processors- AMD Phenom II X6 Processor [Model 1055T]

2.Graphics card- ZOTAC GeForce GTX 470 1.25GB

3.Motherboards- MSI 890GXM-G65

4.SMPS- Corair 550VX

5.RAM- Corsair VS 1333 Mhz DDR3 8GB

6.Hard Drives- WDC 500GB Black S-ATA 3.5" Hard Drive

7.Cabinet- NZXT Gamma

8.Optical drive- HP DVD-Writer Model 1260i

9.Monitor- Samsung P2350

10.Keyboard- Logitech Multimedia

i've decided on 8gb of RAM because RAM is the most important component for offline rendering. now i know that in the NZXT gamma we can add upto 6 fans...but it comes with only 1 fan at the rear...now what i want to know is if i add the other fans...how should i add them..where should i add the exhaust fans & where should i add the intakes? also does it make a difference if i use any fan or should i only go for brands like coolermaster or any other?

 

[mavihs]

some changes i've suggested!

so i've decided upon this config with a budget of Rs.70,000/-

1.Processors- AMD Phenom II X6 Processor [Model 1055T]

2.Graphics card- GeForce GTX 460 1GB

3.Motherboards- MSI 890GXM-G65

4.SMPS- Corair 550VX

5.RAM- Corsair VS 1333 Mhz DDR3 8GB

6.Hard Drives- WDC 500GB Black S-ATA 3.5" Hard Drive

7.Cabinet- NZXT Gamma (have a look at CM Elite 430)

8.Optical drive- HP DVD-Writer Model 1260i

9.Monitor- Samsung P2350

10.Keyboard- Logitech Multimedia

i've decided on 8gb of RAM because RAM is the most important component for offline rendering. now i know that in the NZXT gamma we can add upto 6 fans...but it comes with only 1 fan at the rear...now what i want to know is if i add the other fans...how should i add them..where should i add the exhaust fans & where should i add the intakes? also does it make a difference if i use any fan or should i only go for brands like coolermaster or any other?

get fans with good CFM, that should be your main concern!

 

[Deleted member 26636]

some changes i've suggested!

get fans with good CFM, that should be your main concern!

i'll think about the graphics card at the time of buying...i am not going with the elite 430 as it costs rs.500 more than the nzxt gamma & is actually a bit smaller than the Gamma...could you please tell me how i should place the fans- the gamma's cooling system is- front- 1x 120mm, side- 2x120mm, top- 2x120mm, rear- 1x120mm(this is included, though i do not know if it is intake or exhaust)....i am thinking of adding 1 each at the front, side & top, but i do not know which fans to place where.the included rear fan is 23db/42CFM.so should i look for fans similar to this or does the intake fans need to be of a higher CFM than the exhaust fans?