Making of Snow Lion

grafreak

Broken In
Hi, to start with this is all about a new build... and am starting this right from the scratch how things really took shape..

The basic idea started with the ASUS Sabertooth Mark S, the arctic camo themed motherboard that they released a few months back. I had a few Sabertooth motherboards before (P67/Z77) and this one looked like the ‘one’. Then luckily I got my hands on a Corsair 780T white edition and thought to myself ‘Hey, why not a white themed build?

When I reached out to Asus India with my plan, they responded by agreeing to be the sponsor for this build. Apart from the centerpiece Z97 Sabertooth Mark S, they will also be sending me the GPU for this build - the GTX 980 Matrix platinum

But first thing that came to my mind was that an all-white build may not look that attractive after all. Being from a design background myself, I started to think in a different way. I thought that to make it more beautiful I should have contrasting colors around it. Black was an obvious choice, and I also chose grey since it went well with the entire arctic-camo theme.

So to make the build I choose three colors-

· The base platform to be White
· Black
· And Grey or silver to break and neutralize everything.

Why snow Lion:

Snow Lions are elusive, powerful creatures. The rarity of them seen in the wild has made them somewhat mythical. I wanted that aura associated with this build – a sense of power, a sense of rarity, and a sense of beauty – all mixed into one.

Logo:

For the logo, however, I wanted the lion, not the snow lion. The lion’s manes always gave an impression of its power, so I initially drew three logos.

LOGO LION.jpg

After a bit of thinking and positioning, I chose this one to be the final logo for the build.

lion 1.jpg

- - - Updated - - -

The basic plan:

The Corsair 780T can house one 360mm radiator on top, one 360mm radiator at the front and a 240mm Radiator at the bottom.
For this build I will be using a single Black Ice GTX 360 Gen 2.0 Extreme radiator. It is 54mm thick and can be easily held on top of the 780T with push/pull.

The HD bays are placed in the stock position; they can be removed and adjusted. But instead of 2 HDD bays i decided to go with one as a single bay can host around 4 HDDs and there is a nice setup on the back to mount 3 SSDs. This will also help in uninterrupted airflow from the front.

To highlight the mobo, the colour inside the cabinet is kept black, with white paint job on some parts.

I am also adding in some covers- PSU cover, a cover for the front replacing the stock black mesh, and a cover for the top replacing the top mesh.

[attachment=0]1012968_10204379723626937_8038219489784020850_n copy.jpg[/attachment]

*farm9.staticflickr.com/8727/16877885726_8d4e3c7d97.jpg

*farm8.staticflickr.com/7608/16902768541_5d3e12c7ae.jpg

*farm8.staticflickr.com/7595/16283762863_316f521354.jpg

*farm8.staticflickr.com/7587/16696439397_dc038dcfb4.jpg

*farm9.staticflickr.com/8692/16281396594_22b95047f0_c.jpg

There is markings for the 120 mm and 140 mm fans on top to help in mounting the fans,

---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------

And now some pictures of the stuffs that I am using

The Black ICE GTX Gen two xtreme 360 radiator

*farm8.staticflickr.com/7613/16281412284_a9587e5870_c.jpg

*farm8.staticflickr.com/7284/16716363980_e2bc3f29d8_c.jpg

*farm8.staticflickr.com/7617/16281414454_dfb3c036e8_c.jpg



Fans

Fans in my collection:
3 pcs SP120 High Performance edition fans of 2350 rpm
4 pcs Noise blocker Ultra silent xlp- 120mm fans of 2000 rpm
3 pcs Swiftec Helix [the stock fans that comes with the H320]
3 pcs Corsair SP120L of 2700 rpm


*farm9.staticflickr.com/8700/16902779791_c178686cea_c.jpg

*farm8.staticflickr.com/7605/16281407504_26f2676c91_c.jpg

*farm8.staticflickr.com/7649/16903789415_e546f80161_c.jpg

*farm9.staticflickr.com/8699/16283766823_2c30d1d285_c.jpg

Airflow:

Three 120mm fans will be pushing cold air into the cabinet, preferably- SP120 High Performance edition fans of 2350 rpm
A single 140 mm white LED stock corsair fan at the back as an exhaust.

Lastly, three 120 mm fans below the radiator mounted on top of the cabinet to push the air through the radiator- preferably- Helix 120mm or corsair SP120 high performance edition fans or Noise blocker 120mm fans will be used for this purpose.

If needed i can also get 3 pcs Silverstone SST AP121 white air penetrator 120mm.

Looking forward for suggestions on the airflow and placement of the fans.

---------- Post added at 05:44 PM ---------- Previous post was at 05:42 PM ----------

Some camera work with some fittings

*farm9.staticflickr.com/8695/16902777281_b645736e19_c.jpg

*farm8.staticflickr.com/7630/16696454077_12d66938b1_c.jpg

*farm9.staticflickr.com/8710/16877887746_262da83a56_c.jpg

*farm9.staticflickr.com/8727/16902773031_fec889184f_c.jpg

*farm9.staticflickr.com/8739/16902546312_d82de93086_c.jpg

*farm8.staticflickr.com/7588/16696447627_5829845f93_c.jpg


Tube reservoir

*farm8.staticflickr.com/7614/16877899216_54662274ec_c.jpg

*farm9.staticflickr.com/8705/16902782601_3d590379df_c.jpg

- - - Updated - - -

Some try outs with the fans:

Aerocool DS Dead Silence Fan, the design of the fan is so cool that i couldn't ignore it but I cant get my hands on to those lovely looking fans, so thought of transforming the the cool design in the Sp120s that i have. First i tried out with some reflective vinyles. These vinyle is mainly used for road signages, as with mild lights on them they seem to be glowing. and they have a fine octagonal mesh kind of look on them.

here are some pictures.

*farm8.staticflickr.com/7606/16913368015_e4b2d5efef_c.jpg

*farm8.staticflickr.com/7584/16912358151_373f084d41_c.jpg

*farm8.staticflickr.com/7632/16290989184_081d54577a_c.jpg

*farm8.staticflickr.com/7618/16912114752_94cf5270e5_c.jpg

*farm8.staticflickr.com/7618/16293355623_59d49e3fbb_c.jpg


With black marker pen tried to draw the curved lines that is going to give the Ring effect when the fan will be running.

*farm8.staticflickr.com/7612/16725698698_9807b4a43f_c.jpg

*farm9.staticflickr.com/8700/16913370205_d98e7e0abf_c.jpg

*farm9.staticflickr.com/8751/16727186899_2de3de0242_c.jpg

*farm8.staticflickr.com/7624/16727187269_f66a884149_c.jpg

The fans looking fine, spinning perfectly without any noise and RPM drops. now to check them on the radiator how well the sticker stays on the blades. As i have found some of the corners of the vinyl is peeling off as the the vinyl is thick and a bit hard. If this thing doesn't stays on the blade then will have to look for some other alternatives.

The vinyl stickers started falling from the blades, so replaced it with simple sticker paper, they r thin and quite sticky.

from the vinyl stickers i got he proper measurements of the blades and as per that I draw the rounds and took printouts on the sticker and it went quite good so started with the painting of the body and the final fabrication of the blades. The pictures are as follows


First masking the electrical part with tape and the removal of the rubbers from all the four corners

*farm9.staticflickr.com/8725/16758400738_1dac0a127b_c.jpg


and the rings

*farm9.staticflickr.com/8743/16945127301_bf058caf03_c.jpg


Spray cans for the paint job

*farm9.staticflickr.com/8707/16716364890_5360ebe347_z.jpg

After the first coat of white matte paint

*farm8.staticflickr.com/7633/16945256471_236abe2396_c.jpg

*farm8.staticflickr.com/7588/16326035503_8313efd28a_c.jpg

The final body of the fan after 3 coats of paint

*farm8.staticflickr.com/7605/16945123131_704c78c960_c.jpg

*farm9.staticflickr.com/8738/16326028793_109afa082d_c.jpg

*farm8.staticflickr.com/7634/16945117021_351f94a309_c.jpg

*farm9.staticflickr.com/8696/16920136486_04d14d3246_c.jpg

*farm9.staticflickr.com/8747/16920137946_f72218ee2f_c.jpg


The new Stickers are ready

*farm8.staticflickr.com/7603/16333664713_3ac2f3eff4_c.jpg

*farm8.staticflickr.com/7650/16333660843_9ac8e52e85_c.jpg


Now the Blades

*farm8.staticflickr.com/7601/16944765752_c6eda5b122_c.jpg

*farm8.staticflickr.com/7649/16952459462_92cf514bdf_c.jpg

*farm8.staticflickr.com/7655/16326022373_d719845fb8_c.jpg

*farm9.staticflickr.com/8706/16767587959_a4b8c4d1cf_c.jpg

*farm8.staticflickr.com/7647/16927766846_9a8960818d_c.jpg

so to check how its gone a look and any noise or friction of the stickers with the body, while spinning

*farm8.staticflickr.com/7595/16953707085_589c094976_c.jpg

As everything went well and the sticker was also staying on the blade, so started mounting the fans

*farm8.staticflickr.com/7654/16746528197_89de2a7969_c.jpg

The all three fans in Line

*farm8.staticflickr.com/7643/16767762559_94e00470e8_c.jpg

- - - Updated - - -

its time for some psu cables sleeving, maintaining the colours of the build... the white, grey and black.. but as Asus India has sent me a Gtx 980 matrix platinum i have to include the red colour also in this list....

for cable sleeving am using Pre-sleeved cables, with black male and female connectors, here is what i have tried to do and this is how it looks

*farm9.staticflickr.com/8708/17132748388_cb19071de1_o.jpg

*farm9.staticflickr.com/8749/17132981840_55bef0d6e9_o.jpg

*farm8.staticflickr.com/7799/17132753578_43fa7a387a_o.jpg

*farm8.staticflickr.com/7777/17320109131_cd6c422fcb_o.jpg

*farm8.staticflickr.com/7752/17320539465_4ae3aec6e1_o.jpg

*farm8.staticflickr.com/7795/17132750858_c6c100b89e_o.jpg

*farm8.staticflickr.com/7659/17113094027_37fbc340ff_o.jpg

*farm8.staticflickr.com/7733/17132978200_b12fb2cc35_o.jpg

*farm8.staticflickr.com/7688/17132749238_c97ba2d3c2_o.jpg

- - - Updated - - -

Now its time for the surprises from Asus India

the much awaited Sabertooth Z97 mark S
*c2.staticflickr.com/6/5347/17592315032_00fa03fdb9_o.jpg

After the usual unboxing, I couldn't resist myself from putting the XSPC cpu block with white painted plate and screw on it, to check how its gone a look.
*c2.staticflickr.com/8/7737/17411225648_88f1477cc2_o.jpg

Now its time to uncover the beast
*c2.staticflickr.com/8/7726/16974334423_fdd4a7242e_h.jpg

*c2.staticflickr.com/8/7701/17568323446_80f8a703cb_h.jpg

In the mean time Paint jobs for some parts and accessories

*c1.staticflickr.com/9/8738/17596719482_c2050cc9fb_h.jpg

*c2.staticflickr.com/8/7699/17411220788_9209154aec_h.jpg

*c2.staticflickr.com/6/5343/16976542014_b2dbd457d8_h.jpg

To check how its gone a look

*c2.staticflickr.com/6/5331/17572726946_dad537976d_h.jpg

*c1.staticflickr.com/9/8898/17572724146_d2350ad996_h.jpg
 

arijitsinha

﴾͡๏̯͡๏﴿ O'RLY?
Hi, to start with this is all about a new build... and am starting this right from the scratch how things really took shape..

The basic idea started with the ASUS Sabertooth Mark S, the arctic camo themed motherboard that they released a few months back. I had a few Sabertooth motherboards before (P67/Z77) and this one looked like the ‘one’. Then luckily I got my hands on a Corsair 780T white edition and thought to myself ‘Hey, why not a white themed build?

Nice, waiting for more, and thank god i opened this thread in my office PC.
 
Last edited:
OP
G

grafreak

Broken In
Thanks Kingston India for the Rams

*c1.staticflickr.com/9/8844/17009962723_e893f058d4_o.jpg

*c2.staticflickr.com/8/7724/17627920162_ed0b6f4084_o.jpg
 

anirbandd

Conversation Architect
Nice, waiting for more, and thank god i opened this thread in my office PC.

please edit and snip the quote.. making thread too long and cumbersome.

- - - Updated - - -
[MENTION=150581]grafreak[/MENTION] : where are you getting these parts in Bengal?? i see bengali newpapers and the tip of a jhadu in a pic.

and please let us know how you got Asus, kingston to sponsor the build?


btw, this is one of the best mods here on the forum. hats off to you for that. :clap2:
 

Sid_gamer

Team Digit
[MENTION=150581]grafreak[/MENTION],

Really good build log and quality of work.
Keep 'em coming.
Subbed for updates :thumbs:
 
OP
G

grafreak

Broken In
thanks a lot every one, sorry for the late reply.

lots of mails to Asus PR and submissions of the project plans, in paper as well as in practical... and 4 months of hardwrk and try outs on different things helped to get the sponsorship..
 
OP
G

grafreak

Broken In
the GTX 980 matrix platinum... it comes with the usual ROG colour combination... red and black... so for this a red coloured sleevings have been added to the usual black and white combination.... but the gpu needed a little bit of white impression also... to make it a part of this build... The ROG logo was white and the red streaks really looked awesome, so following that just tried to add some white streaks and the result is as follows.... some white vinlys on the cover and a honey comb design vinyl with matte lamination for back plate...

*c2.staticflickr.com/6/5457/17747708079_927ee52dff_o.jpg

*c2.staticflickr.com/6/5349/17934585935_5f93f51588_o.jpg
 
OP
G

grafreak

Broken In
Its time for some fun with acrylic sheets. I planned to put the 3 SP120 fans on front and to show the white stickers on it, i need a transparent cover for it, so acrylic sheet comes as the first choice, made a honey comb design and then went for the laser cutting for the perfect finish. This was my first time with the laser cutting workshop so had some issues with the files, so did a basic try out and here is the out come...

the front panel
*c1.staticflickr.com/9/8828/17809754010_c6433957d5_o.jpg

The TUF logo
*c2.staticflickr.com/8/7734/17998124381_5ff1812743_o.jpg

The outcome
*c1.staticflickr.com/9/8756/17809717220_8c26b5c661_o.jpg

a logo for the top mesh of the cabinet and some light effects on the Front acrylic panel
*c2.staticflickr.com/6/5445/17998147821_2ba149b547_o.jpg
 
OP
G

grafreak

Broken In
Now its time for the pics of some tryouts that I have done inside with some acrylic, to start with,

A psu cover- an acrylic sheet of 4 mm with a matte lamination on it. used the Matte lamination to diffuse the visibility of the things under it, but still to get a hint of the light under it.

*c2.staticflickr.com/6/5322/18076227861_aa145e1769_o.jpg

Now its time for the tubing, got some acrylic tubes with G1/4 thread on both ends, so with both side male adapters i started using them with the help of some xspc 45 degree adapters and a bit of flexible white tubes where it was not easy to mount the acrylic tubes.

First I started the loop like from the tube reservoir the pump taking the water and pushing it straight to the CPU block and then from CPU block moving to the Radiator and from Radiator going to the Reservoir.

*c2.staticflickr.com/6/5335/18071944282_90a816d18f_o.jpg

The Tube going to the CPU block was straight, but the tube coming out from the CPU block was at 45 degree. So in the next tryout I changed the direction of the tube carrying water to the CPU block from 90 to 45 degree to match the other tube, and here it how it looked.

*c1.staticflickr.com/9/8795/18075299325_509e0fa61e_o.jpg

To maintain proper air pressure for the radiator I shifted the SP 120s from the front and put them inside the cabinet, pushing air thru the radiator, and have put 2 corsair ap fans on top to pull the air through the radiator. And planned to put to 140 mm LED fans on the front as intake... so this lead to rework on the front panel acrylic design. And this is what I did to the front panel.

*c2.staticflickr.com/6/5469/17889069299_1dbf46c7c3_o.jpg
 
D

Deleted member 118788

Guest
This is ultimate. :goodjob:

- - - Updated - - -

I want to steal this rig. Tell me your address.
 
Top Bottom