How to change the Video Card Bus Speed?

Status
Not open for further replies.

zeneyatta

Right off the assembly line
I have a AMD 1.5Ghz athlon pc,with a XFX GForce 5200 256 mb card,my motherboard is Asus 4x.The card has been underperforming since i bought it.Recently i discovered it is down to the fact that it is running at 0x or 1x speed,while its capable of running till 8x.Now how and where do i change these settings so as to enbale it to work at it's optimal settings.
 

Aseem Nasnodkar

In the zone
i dont think it shud work on 1x if ur motherboard supports 4x.It shud and will work max on 4x.

Pls give ur motherboard manufacturer and specifications
 
OP
Z

zeneyatta

Right off the assembly line
help

The problem lay with the fact that i had forgotten 2 install my Chipset,so it was getting detected as a PCI device.Once i installed it changed to AGP 4X,but still the graphics card is underperforming.It still gives a score 1200 on 3dmark03,it still struggles on lot of games.I don't know why it is underperforming.Is it becasue my motherboard 4x and my card is 8x??The fact is that on games like Doom or Fifa2006 it struggles even if i put it on the lowest settings.My friend has a GForce 5200 128,but 8x motherboard and his graphics is lightyears away from mine despite my being a GForce 5200 256 with 4x Motherboard.So i know something else is wrong.Could you sugges any thing on wat it cud be and what i could do
 
I

invisible

Guest
Yours 5200 GPU may be 64-bit and your friends might be 128-bit GPU>
I do know that 256MB 5200 GPUs are mostly 128-bit but still i do feel u may have got 64-bit one.
 

abhijit_reddevil

Manchester United
:!: You can use the inbuilt diagnostic report provided by 3d mark 03 to give analysis for your graphics subsystem, i.e. how much memory, memory interface (64-bit or 128-bit), which version of pixel shaders it supports, etc.

:!: One excellent tool for getting the above report is the application called rivatuner, available from www.guru3d.com. It will give all detailed reports and also unlocks the overclocking capabilities of the graphics card. 8) from both the application itself and also from the forceware control panel.

Try the report from rivatuner and give us the report. As someone else pointed out, it might be 64-bit version.
 
OP
Z

zeneyatta

Right off the assembly line
report

i hope this is the report u were looking for

$ffffffffff ----------------------------------------------------------------
$ffffffffff Northbridge information
$ffffffffff ----------------------------------------------------------------
$0400000000 Description : NVIDIA nForce
$0400000001 Vendor ID : 10de (NVIDIA)
$0400000002 Device ID : 01a4
$0400000003 AGP bus : revision 2.0
$0400000004 AGP status : enabled
$0400000005 AGP rate : 1x 2x 4x supported, 4x selected
$0400000006 AGP SBA : supported, enabled
$0400000007 AGP FW : supported, enabled
$ffffffffff ----------------------------------------------------------------
$ffffffffff Display adapter information
$ffffffffff ----------------------------------------------------------------
$0000000000 Description : NVIDIA GeForce FX 5200
$0000000001 Vendor ID : 10de (NVIDIA)
$0000000002 Device ID : 0322
$0000000003 Location : bus 2, device 0, function 0
$0000000004 Bus type : AGP revision 3.0 (AGP 2.0 mode)
$0000000005 AGP status : enabled
$0000000006 AGP rate : 1x 2x 4x supported, 4x selected
$0000000007 AGP SBA : supported, enabled
$0000000008 AGP FW : supported, enabled
$0000000009 Base address 0 : dc000000 (memory range)
$000000000a Base address 1 : e0000000 (memory range)
$000000000b Base address 2 : none
$000000000c Base address 3 : none
$000000000d Base address 4 : none
$000000000e Base address 5 : none
$ffffffffff ----------------------------------------------------------------
$ffffffffff NVIDIA specific display adapter information
$ffffffffff ----------------------------------------------------------------
$0100000000 Graphics core : NV34 revision B1
$0100000001 Hardwired ID : 0320 (ROM strapped to 0322)
$0100000002 Memory bus : 128-bit
$0100000003 Memory type : DDR (RAM configuration 00)
$0100000004 Memory amount : 262144KB
$0100000005 Core clock : 249.750MHz
$0100000006 Memory clock : 166.500MHz (333.000MHz effective)
$0100000007 Reference clock : 27.000MHz
 
OP
Z

zeneyatta

Right off the assembly line
i got a 3dmark03 score of 1254.Is tat good score for my card?the pixel shader is 2.0.i am not sure wat that means.
 
Status
Not open for further replies.
Top Bottom