Hi need a 40k Rig

W

walker916

Broken In
1. What is the purpose of the computer? What all applications and games are you going to run? (Stupid answers like 'gaming' or 'office work' will not work. Be exact. Which games? Which applications? Avoid the word 'et cetera.')
Ans:I'am a 3d modeler/lighting artist so Autodesk 3Ds max,Maya,Adobe editing software's,
Games like Battlefield 3,crysis 3 and yet to come games

2. What is your overall budget? If you can extend a bit for a more balanced configuration, then mention this too.
Ans:40k +2:-?

3. Planning to overclock?
Ans:NO

4. Which Operating System are you planning to use?
Ans:Windows 7

5. How much hard drive space is needed?
Ans:500gb (have a 250gb)

6. Do you want to buy a monitor? If yes, please mention which screen size and resolution do you want. If you already have a monitor and want to reuse it, again mention the size and resolution of monitor you have.
Ans:Yes need 19'' ,Currently using Samsung LCD SyncMaster 740N 17''inch 1280 by 1024

7. Which components you DON'T want to buy or which components you already have and plan on reusing?
Ans:Cabinet,keyboard,mouse

8. When are you planning to buy the system?
Ans:next week

9. Have you ever built a desktop before or will this be done by an assembler?
Ans:Assembler

10. Where do you live? Are you buying locally? Are you open to buying stuff from online shops if you don't get locally?
Ans:Bangalore,yes S.P road,yes

11. Anything else which you would like to say?
Ans:suggest me Intel,this is my 3rd rig and i prefer Intel (no offence)
 
Cilus

Cilus

laborare est orare
Just have a look at this thread: *www.thinkdigit.com/forum/pc-components-configurations/171444-gaming-rig-budget-43k.html
I've suggested a configuration there and if you remove the components you already have, it will come pretty much near to your budget.
 
OP
W

walker916

Broken In
Cilus said:
Just have a look at this thread: *www.thinkdigit.com/forum/pc-components-configurations/171444-gaming-rig-budget-43k.html
I've suggested a configuration there and if you remove the components you already have, it will come pretty much near to your budget.
Click to expand...
Thanks that's the config i had in mind but i don't want gigabyte motherboard so suggest me ASUS motherboard
 
Sainatarajan

Sainatarajan

Wise Old Owl
IF you want an ASUS mobo go with this P8B75M-LX But remember only 2 slots for RAM whereas the Gigabyte has 4 slots and also more VFM....
 
anirbandd

anirbandd

Conversation Architect
in case there are multiple brands of repute, its better to target products which are better VFM rather than trusting a brand blindly..

go with Cilus's suggestion.
 
harshilsharma63

harshilsharma63

DIY FTW!
fx 8350 (11000)
Asus M5A97 (6400)
G.Skill ripjawsx /sniper (whichever is cheaper) 1600 MHz 4 Gb (1700)
MSI HD7770 (8000)
Corsair CX500v2 (3500)
WD blue / seagate barracuda 500 GB (3000)
Dell st220l (8500)

total: 42100
 
OP
W

walker916

Broken In
thanks guys, but keeping the budget in mind did a small edit from what you'll suggested and will msi hd7770 GPU sufficient for all my maya rendering and v-ray.. suggestions plz:)

fx 8350 (11000)
Asus M5A97 (6400)
G.Skill ripjawsx /sniper (whichever is cheaper) 1600 MHz 4 Gb (1700)
MSI HD7770 (8000)
Corsair CX500v2 (3500)
WD blue / seagate barracuda 500 GB (3000)
Dell st220l (8500)

FX 6100
ATI 7850 2gb
 
Cilus

Cilus

laborare est orare
FX 6100 is okay for your other stuffs apart from gaming. In gaming, only the very recent titles like Crysis 3 run well in this Processor but in most of the other games, it trails behind even the older Phenom II X4 Processors.Better stick with FX-8350.
 
OP
W

walker916

Broken In
thanks guys finally decided to go for Intel

Intel i5 3570
Asus p8h77-m (suggest any intel MB which is equal to this board )
G-skill single stick 8gb 1600mhz
Sapphire 2gb hd7850
Seagate 1 TB hdd sata
coolermaster thunder 500w or Corsair cx 500w

Guys any suggestions or should i go ahead... thanks
 
F

FDS

Broken In
Cilus said:
For AMD config, go with FX-8350 @ 11.5K + Asus M5A97 @ 6.4K
Click to expand...

Is there any cheaper motherboard than this ???
Im also planning to buy fx8350 , but im very tight on budget so i have to go with intel i5 3470 + gigabyte b75 :(
i want to buy fx 8350 .. so is there anything which i can do ?? :|
 
Cilus

Cilus

laborare est orare
Well, lucky for you, I just found the motherboard for you:-
ECS A970M-A-Deluxe @ 5.075K : Theitdepot - Buy ECS A970M-A-Deluxe 32GB DDR3 AMD Motherboard online in india

This motherboard does have good reviews too. Check here for review: ECS A970M-A Deluxe Motherboard Review - Overclockers Club
 
F

FDS

Broken In
Cilus said:
Well, lucky for you, I just found the motherboard for you:-
ECS A970M-A-Deluxe @ 5.075K : Theitdepot - Buy ECS A970M-A-Deluxe 32GB DDR3 AMD Motherboard online in india

This motherboard does have good reviews too. Check here for review: ECS A970M-A Deluxe Motherboard Review - Overclockers Club
Click to expand...

Thanks :) I found 1 gigabyte motherboard also .. which is for 4500/- .. i went to nehru place and the dealer told me abt this .. bt he cudnt tell me the model no. :| .. do have any idea abt this ?? :|
 
sumalatha

sumalatha

Banned
walker916 said:
1. What is the purpose of the computer? What all applications and games are you going to run? (Stupid answers like 'gaming' or 'office work' will not work. Be exact. Which games? Which applications? Avoid the word 'et cetera.')
Ans:I'am a 3d modeler/lighting artist so Autodesk 3Ds max,Maya,Adobe editing software's,
Games like Battlefield 3,crysis 3 and yet to come games

2. What is your overall budget? If you can extend a bit for a more balanced configuration, then mention this too.
Ans:40k +2:-?

3. Planning to overclock?
Ans:NO

4. Which Operating System are you planning to use?
Ans:Windows 7

5. How much hard drive space is needed?
Ans:500gb (have a 250gb)

6. Do you want to buy a monitor? If yes, please mention which screen size and resolution do you want. If you already have a monitor and want to reuse it, again mention the size and resolution of monitor you have.
Ans:Yes need 19'' ,Currently using Samsung LCD SyncMaster 740N 17''inch 1280 by 1024

7. Which components you DON'T want to buy or which components you already have and plan on reusing?
Ans:Cabinet,keyboard,mouse

8. When are you planning to buy the system?
Ans:next week

9. Have you ever built a desktop before or will this be done by an assembler?
Ans:Assembler

10. Where do you live? Are you buying locally? Are you open to buying stuff from online shops if you don't get locally?
Ans:Bangalore,yes S.P road,yes

11. Anything else which you would like to say?
Ans:suggest me Intel,this is my 3rd rig and i prefer Intel (no offence)
Click to expand...

You can certainly go for this config:

AMD FX 8350 -11000,
Corsair Vengeance 4GB 1600MHz -1500,
Corsair GS600 -4500,
WD Blue 500GB -3100,
Asus M5A97 R2.0 -6000,
Cooler Master Hyper 212 Evo -2200,
Asus HD7770 1GB -8000,
Dell 19" IN2020M -6400.
TOTAL -42,700.
 
You must log in or register to reply here.
Top Bottom