H.A.W.X help

Status
Not open for further replies.

Plasma_Snake

Indidiot
Whenever I try to run HAWX, its res. goes out of screen's range hence gives no signal message. Saw he config file in settings menu and there it shows 1024x768 which my screen does supports but still same error. Tried making it read-only and running it windowed but nothing happens. Below is my config file, tell me what to append?
Code:
[Video]
mode = 15
adapter = 0
zbufferdepth = 75
format = 22
width = 1024
height = 768
windowed = false
multisample = 2
vsync = false
refreshrate = 60
gamma = 0.5
contrast = 0.5
brightness = 0.5
hdr = true
heateffect = true
globallod = true
dof = true
viewDistance = 1.0
viewDistanceScale = 1.0
particlesQuality = 2.0
textureQuality = 1.0
staticsQuality = 1.0
cloudsQuality = 3.0
forestQuality = 1.0
playerAirplaneQuality = 4.0
EnvironmentQuality = 1.0
DX10_shadows = 1.0
DX10_sunshafts = 1.0
DX10_ssao = 0.0
DX10_1 = true


[Sound]
voicevolume = 1.0
musicvolume = 1.0
soundfxvolume = 1.0
recthreshold = 5.0

[General]
HUD = true
Subtitles = true
Measurements = 0
InvertYAxis = 0
InvertMouseYAxis = 0
InvertYaw = 0
InvertThrottle = 0
InvertCamera = 0
CameraMode = 1
amBX = true
EnableExpertControls = 0
InGameChat = 1

[PictureKeys]
frame_texture =  'Textures/Menus_PC/Frame_PC.dds'

[PictureKeys.Normal]
color = 1838392672
dimTexX = 24.0
dimTexY = 24.0

[PictureKeys.Focused]
color = 1838392752
dimTexX = 24.0
dimTexY = 24.0
 

Ethan_Hunt

Aspiring Novelist
What's your native resolution? Did you change the format of .ini file? Take a look at my profile:

Code:
[Video]
dof = true
hdr = true
mode = 52
vsync = false
gamma = 0.500000
width = 1280
heateffect = true
playerAirplaneQuality = 4.000000
adapter = 0
DX10_1 = false
staticsQuality = 1.000000
zbufferdepth = 75
brightness = 0.500000
viewDistanceScale = 1.000000
contrast = 0.500000
forestQuality = 1.000000
cloudsQuality = 3.000000
EnvironmentQuality = 1.000000
particlesQuality = 2.000000
DX10_ssao = 0.000000
viewDistance = 1.000000
textureQuality = 1.000000
DX10_sunshafts = 1.000000
DX10_shadows = 1.000000
globallod = true
refreshrate = 75
format = 22
height = 1024
multisample = 4
windowed = false

How did you get "height" & "Width" setting one below the other?
 
OP
Plasma_Snake

Plasma_Snake

Indidiot
I didn't do anything to the file, its as it is. I'm using Vista maybe that's why.
Offtopic, Bhai sahab kabhi XFire vagerah pe bhi aa jaya karo, wahin hum garibon ka ilaaj kar diya karo! :oops: :lol:
OK, replaced my Video settings with yours and changed the res to 1024x768 but still the same No signal error.:x
 
Last edited:

Ethan_Hunt

Aspiring Novelist
LOL! I'm not a big IM fan. It's been a while since I logged onto any IM client except Yahoo. :D

Anyway are you still using that LCD TV as your monitor? Then shouldn't you be aiming for 1360x768 resolution?
 
OP
Plasma_Snake

Plasma_Snake

Indidiot
Yes, I'm still using my LCD TV as display and I tried 1360x768 too but the case was same to reverted to a lower setting. Any Ideas as how to correct it? :cry:
OK, so googled it a bit more, read few links which I skipped last night and found out that I was changing settings from the game's install folder whilst changes had to be made from its folder created in My Documents section. :oops: Since there was none in ,y case so snooped around a bit and found it under Saved Games folder of Vista :evil: Edited it, ran it and everything is fine and dandy. :-D
 
Last edited:

Ethan_Hunt

Aspiring Novelist
^Dude come on. I thought you already were in the My Documents profile. That's where I got my profile settings from in the first place. :D
 
OP
Plasma_Snake

Plasma_Snake

Indidiot
Haan Bhai, any piece of advice on How to complete that mission in which we have to destroy SAM sites, the one in which we are all by our lonely @$$. :x
 

Ethan_Hunt

Aspiring Novelist
Assuming this is the Stiletto mission (mission 9), you'll need to be very quick in the last part only. Just make sure you don't take much damage to your plane till the last check point. My advice would be to use the Mig-23 Superfulcrum fighter instead of the recommended F-14A Tomcat. Reason being during the last checkpoint, you'll have to take out SAM's as well as those Mirage bogies. Although the recommended F-14A allows you to launch radar guided missiles, the Migs are equipped with Multi-AA missiles. This should allow you to take out those Mirages in one shot. Believe me when I say this, if they break their formation then you're done for chasing them.

When you start off with the checkpoint, take out the batch of Mirage fighters heading your way with the multi-AA shot. Make sure you get them all. Next, target the closest SAM & get close to it, lock on & launch 2 J-strike missiles. Since these missiles don't have long range accuracy of the radar guided missiles, make sure you fire 2 of them, just in case. Pick the ones which are close to the escort bomber we have to protect. The bomber will take serious damage if those SAM's start shooting at it. You won't have to destroy all the SAM(s), just enough for the bomber to enter their drop zone.

Keep at it. This mission can be a pain in the ass at times. Took me around 10 tries on Hard mode to get it right. :sad:
 
Status
Not open for further replies.
Top Bottom