AMD Catalyst Driver Update Thread [ 12.8 ]

rchi84

In the zone
On my 6950 (unlocked), my 3D Mark 11 scores have shot up in the last six months. I used to score around 51xx in Performance preset last year, but now, I am getting scores in 55xx, so it's a decent bump in scores.

Gamewise, not much has changed though. Still can't enable AA in BF3, without dropping FPS..
 

Monk

Journeyman
Downloading now, will surely update the performance. :)

Edit: Downloaded and installed, to my surprise the screen turned completely white, with horizontal black lines. It scared the living .... out of me!!
Perhaps some downloading error? Did a system restore, uninstalled the ATi display drivers and downloaded the 12.7 beta from the website, installed and *boom*, every game runs sweeter now, specially skyrim! It runs really smooth, much better than before. Will check more games!
 
Last edited:

krishnandu.sarkar

Simply a DIGITian
Staff member
I have installed 12.6 and I'm facing a problem. My screen is not fitted into monitor bezel.

So I set Overscan under Scaling Options. (I have also used this setting previously)

So the problem is, whenever I reboot my PC, it goes to same old state. When I open Catalyst Control Center, it shows Overscan settings perfectly fine, still it's not fitted till screen bezel.

I have to manually Detect Display everytime I start my PC, this is really frustrating.

Any idea what's wrong..??

(Sorry for my bad english, if I'm not able to explain the problem perfectly)
 

skeletor

Chosen of the Omnissiah
I have installed 12.6 and I'm facing a problem. My screen is not fitted into monitor bezel.

So I set Overscan under Scaling Options. (I have also used this setting previously)

So the problem is, whenever I reboot my PC, it goes to same old state. When I open Catalyst Control Center, it shows Overscan settings perfectly fine, still it's not fitted till screen bezel.

I have to manually Detect Display everytime I start my PC, this is really frustrating.

Any idea what's wrong..??

(Sorry for my bad english, if I'm not able to explain the problem perfectly)

AMD Catalyst 12.6 Released (+ 12.7 Beta) - Beyond3D Forum

Example of where to create:
*i.imgur.com/w3HlR.png

PS: I haven't faced this problem.
 

krishnandu.sarkar

Simply a DIGITian
Staff member
^^Thanks I created the dword value as it's stated. Let's reboot and check :)

Yeah I got that. I created under ###/0000 with most values / settings.

UPDATE : Not working :(

[Solved] Catalyst 12.6 Overscan setting restart issue. - ATI - Graphic-Displays

They say the problem is fixed. But not for me. :(

Well, the problem is not fixed, instead the font got hazy...

*i.imgur.com/pnF2w.jpg

Will be trying 12.7 Beta and if it doesn't works revert back to 12.4
 

yabbadaaba

Broken In
i am not even able to download from amd site..their download link is dead i think..
tried from their US site also but to no avail..
 
Last edited:

topgear

Super Moderator
Staff member
there's not much performance improvement I can see compared to 11.12 - actually the performance has degraded so far in most of the benchmarks - will complete other benchmark tests today and post the complete result tomorrow.
 

kapilove77

Padawan
I have installed 12.6 and I'm facing a problem. My screen is not fitted into monitor bezel.

So I set Overscan under Scaling Options. (I have also used this setting previously)

So the problem is, whenever I reboot my PC, it goes to same old state. When I open Catalyst Control Center, it shows Overscan settings perfectly fine, still it's not fitted till screen bezel.

I have to manually Detect Display everytime I start my PC, this is really frustrating.

Any idea what's wrong..??

(Sorry for my bad english, if I'm not able to explain the problem perfectly)

Same problem with me Exactly same. :(

Update: It really works I just created without changing any values in it and Restarted my pc n voila it worked!
 
Last edited:

the_conqueror

Ambassador of Buzz
I have installed 12.6 and I'm facing a problem. My screen is not fitted into monitor bezel.

So I set Overscan under Scaling Options. (I have also used this setting previously)

So the problem is, whenever I reboot my PC, it goes to same old state. When I open Catalyst Control Center, it shows Overscan settings perfectly fine, still it's not fitted till screen bezel.

I have to manually Detect Display everytime I start my PC, this is really frustrating.

Any idea what's wrong..??

(Sorry for my bad english, if I'm not able to explain the problem perfectly)

Same happening with me. But 5 minutes after rebooting, the screen automatically fits upto the bezel.
 

coderunknown

Retired Forum Mod
yesterday i updated drivers to 12.6 from 12.4 and while checking some videos, the screen kind of changed colour (32 to 16bit i guess) and after a few minutes back to normal. and also whole system kind of locked up for 10-12sec. This happened for the first time in a long time. Though it is fine after that. no affect on any game i played today.

Looks like with the removed support for legacy GPU some important codes got erased too.
 

krishnandu.sarkar

Simply a DIGITian
Staff member
@kapilove77 Ok trying without changing the value.

@the_conqueror Well, the situation is same for me. So I'm assuming it's not working. It doesn't mean anything if it gets fixed after five mins. So I end up opening Catalyst Control Center everytime.
 

topgear

Super Moderator
Staff member
CPU: AMD Phenom(tm) II X4 955 Processor
Motherboard: Gigabyte GA-MA785GM-US2H x.x
Installed RAM: 4.00 GB
Installed Memory Type and Speed : DDR2 800 Mhz
Operating System: Windows 7 x64 SP1
Video adapter: AMD Radeon HD 6850 ( 800/1100 )
Video driver: Catalyst 11.12 and 12.6
Resolution : 1080P - maximum settings used in every benchmark with all the advanced option like Tessellation, DoF, Physx etc. turned on*

Test Result : ( left is 11.12 and right is 12.6 )
Green = Performance Increase
Blue = Performance decrease

===========================================
AvP 2010 :
Average FPS: 29.9 - 33.4
===========================================
Sniper Elite v2 :
Average FPS: 10.2 - 9.9
============================================
PLA Game BenchMark : ( Unreal Engine 3.0 )
Average FPS: 37 - 37
============================================
3DMark 11 BenchMark ( Xtreme Preset ) :
Graphics Score: 1037 - 1052
Physyx Score : 3773 - 3815
============================================
Street Fighter IV BenchMark :
Graphics Score: 10380 - 8896
Average FPS: 130.04 - 115
============================================
Lost Planet 2 BenchMark :
Average FPS: B - 33.4 ( Test A ) - 31.0
Average FPS: C - 25.0 ( Test B ) - 25.6
=============================================
METRO 2033 BENCHMARK:
Average Framerate: 16.00 - 15.67
Max. Framerate: 33.95 - 30.68
Min. Framerate: 6.58 - 6.37
============================================
3DMark Vantage BenchMark : ( 1080P )
Graphics Score: X7190 - X7141
============================================
Crysis 2 BenchMark :
Average FPS: 23 ( Central Park - Edge Blur - High Res Tex - Ultra ) - 23
Average FPS: 31 ( Times Square - Edge Blur - High Res Tex - Ultra ) - 31
============================================
Unigine Heaven 3.0 :
FPS: 18.7 - 18.8
Scores: 470 - 474
Min FPS: 5.7 - 8.2
============================================
RE5 DX10 :
AVG FPS :76.2 ( Fixed ) - 76.1
AVG FPS :87.9 ( Variable ) - 88
============================================
DiRT ShowDown :
Min FPS :28 - 25.26
AVG FPS :38 - 33.21

So guys post your feedback ;-)
 
OP
S

SunE

Professional Newbie
topgear how can the average fps for Sniper Elite V2 be so low? My PC does over 120 fps maxed out and AFAIK the difference between a HD 6850 and a HD 7850 can't be 110 fps??!!
 

topgear

Super Moderator
Staff member
^^ yep, that's odd - I can run the game at Ultra settings ( with every other settings maxed out too ) smoothly - must be ~30+fps but the benchmark tool of this game is really acting weird - will update to 12.7 beta and test again with only with the benchmark software ( large one ) - this time I won't use the adrenaline bench tool for the benchmark app.
 
Top Bottom