spironox
Booting Nicotine!!
Hi there people,
Its being a while since i had been on digit forum .. Yep lot changed here on the forum i see new faces and better efficient solutions being handed out to people ..happy for that
below is the system config of a computer ... kindly go through that
<<< System Summary >>>
> Mainboard : ASUSTeK COMPUTER INC. SABERTOOTH 990FX R2.0
> Chipset : ATI RD9x0
> Processor : AMD FX @ 4114 MHz
> Physical Memory : 8192 MB transcend make JM1333KLN-4G
> Video Card : AMD Radeon HD 6670
> Hard Disk : Seagate ST31000524AS ATA Device (1000GB)
> DVD-Rom Drive : HL-DT-ST DVDRAM GH24NS72
> Monitor Type : Samsung S20B300 - 20 inches
> Network Card : Realtek Semiconductor RTL8168/8111 PCIe Gigabit Ethernet Adapter
> Operating System : Windows 7 Ultimate Professional Media Center 6.01.7601 Service Pack 1 (64-bit)
> DirectX : Version 11.00
> SMPS : 600 W APFC , Make : circle
Now comes to the problem :
> Autodesk 2012 is installed in the computer .. all major updates installed and the windows update is also on and is updated automatically, when the files are rendered in the Autodesk 2012 3dmax the system cpu utilization shoots to 100% and so does the fans of the motherboard and chasis fans and suddenly the computer trips and restarts !!! so we replaced the smps to the 600W from the 500W ..
can any one help me to get the problem solved ?? as the computer is a rendering machine of a upcoming firm and they are depending on the pc for bread and butter.
Any suggestions ??
Its being a while since i had been on digit forum .. Yep lot changed here on the forum i see new faces and better efficient solutions being handed out to people ..happy for that
below is the system config of a computer ... kindly go through that
<<< System Summary >>>
> Mainboard : ASUSTeK COMPUTER INC. SABERTOOTH 990FX R2.0
> Chipset : ATI RD9x0
> Processor : AMD FX @ 4114 MHz
> Physical Memory : 8192 MB transcend make JM1333KLN-4G
> Video Card : AMD Radeon HD 6670
> Hard Disk : Seagate ST31000524AS ATA Device (1000GB)
> DVD-Rom Drive : HL-DT-ST DVDRAM GH24NS72
> Monitor Type : Samsung S20B300 - 20 inches
> Network Card : Realtek Semiconductor RTL8168/8111 PCIe Gigabit Ethernet Adapter
> Operating System : Windows 7 Ultimate Professional Media Center 6.01.7601 Service Pack 1 (64-bit)
> DirectX : Version 11.00
> SMPS : 600 W APFC , Make : circle
Now comes to the problem :
> Autodesk 2012 is installed in the computer .. all major updates installed and the windows update is also on and is updated automatically, when the files are rendered in the Autodesk 2012 3dmax the system cpu utilization shoots to 100% and so does the fans of the motherboard and chasis fans and suddenly the computer trips and restarts !!! so we replaced the smps to the 600W from the 500W ..
can any one help me to get the problem solved ?? as the computer is a rendering machine of a upcoming firm and they are depending on the pc for bread and butter.
Any suggestions ??