[Sponsored] [Completed] Havok-Beta 1.0 DeskMod

PramodHambir44841

Right off the assembly line
Hi everyone, I would like to show my first modding project to everyone, I have seen many awesome DeskMod builds on the internet and forums, However I wanted to build something very special for my office. I want people to be able to see it from all sides. Also, wanted proper cable management done specially at the back side of the table as that's what people see when the enter my work-space which is HAVOK NATION - The Gamers Destination.

Specification:

CPU: AMD FX-8350
CPU Cooler: Corsair Hydro Series™ H60 High Performance Liquid CPU Cooler
CPU Cooler FAN: CoolerMaster XtraFlo 120 Red LED
Motherboard: Asus M5A99FX PRO R2.0
GPU: SAPPHIRE HD 7950 3GB GDDR5
RAM: G.SKILL Sniper 8GB (2 x 4GB) DDR3
SSD: Intel® SSD 330 Series (60GB, SATA 6Gb/s)
HDD: WD Green 1TB
Optical Drive: LG 24x DVD RW±
PSU: Corsair VS650W
Keyboard: Logitech Internet Pro Y-SZ4
Mouse: Razer DeathAdder Black
MousePad: Razer Goliathus Small Control
Monitor: Benq 24 inch Full HD Monitor G2412HD and SONY 32 inch Full HD BRAVIA NX520 LCD TV

Modding: Deepcool Rockmaster 3.0 Fan Controller
Modding: NZXT HUE RGB LED Controller
Modding: Deepcool XFan Red LED 120mm

Sponsors:
*i.imgur.com/6fkJSKo.jpg*i.imgur.com/nQT7Q93.jpg
GPU: Asus GTX 980 Strix
Mobo: SABERTOOTH 990FX R2.0 - ASUS

*i.imgur.com/kPwLQSM.jpg
Mouse: Kone Pure
Mouse Pad: Taito 3mm Mini

*i.imgur.com/woGYkCP.jpg
RAM: G.SKILL Sniper 8GB (2 x 4GB) DDR3
SSD: G.SKILL Phoenix Pro Series 120GB

*i.imgur.com/sn894Je.jpg
PSU: DQ750 Quanta
Modding: Deepcool Rockmaster 3.0 Fan Controller
Modding: Deepcool XFan Red LED 120mm [Converted to Green]

It's time for some photos! I regret for the low quality phone photo’s.. they were taken for build log inside my house.

Please check my build and let me know your thoughts on the same.

Looking forward for feedback and suggestions.
 
Last edited:
OP
P

PramodHambir44841

Right off the assembly line
Work Log:

I started with basic sketch on white paper to finalized dimension of Desk
*i.imgur.com/VRQQkm5.jpg
*i.imgur.com/we7WMFQ.jpg

After finalizing dimension on the paper, I started work on ply
*i.imgur.com/2wBunam.jpg
*i.imgur.com/KBYMOrF.jpg
*i.imgur.com/b7BWRlx.jpg
*i.imgur.com/ZvLWEMY.jpg

Back Side area of desk for cable management
*i.imgur.com/iiCQJPo.jpg
*i.imgur.com/F30wyUd.jpg

Base mount for Motherboard, PSU and HDD
*i.imgur.com/wT9jnhv.jpg
*i.imgur.com/ZiOvDYC.jpg

120mm FAN size cutting to ply for best cooling
*i.imgur.com/4fkfz1U.jpg
*i.imgur.com/pyWUU6K.jpg

- - - Updated - - -

Testing cutting ply for fitting with old CPU components
*i.imgur.com/J3LLW1n.jpg
*i.imgur.com/PmY6oXR.jpg
*i.imgur.com/K2l6ICX.jpg
*i.imgur.com/S5xfLW1.jpg
*i.imgur.com/qmJAI1I.jpg

Painting job
*i.imgur.com/0WLd5Wt.jpg
*i.imgur.com/WngEokg.jpg
*i.imgur.com/jKZfvIW.jpg
*i.imgur.com/YgbWPF8.jpg
*i.imgur.com/kI98JIU.jpg
*i.imgur.com/B39AuT6.jpg
*i.imgur.com/OoJBpKq.jpg

Final fitting initiated
*i.imgur.com/LoaCBls.jpg
*i.imgur.com/BpnP7sV.jpg
*i.imgur.com/aoVQOYb.jpg
*i.imgur.com/Vphg4rU.jpg

Pre-sponsored component fitting
*i.imgur.com/x9m9kAl.jpg
*i.imgur.com/veQPVJa.jpg
*i.imgur.com/I5Fm30o.jpg
*i.imgur.com/qqkxIti.jpg
*i.imgur.com/4oV23PH.jpg

Top and Front surface fitting
*i.imgur.com/vtC1c2g.jpg
*i.imgur.com/xUuKGJU.jpg
*i.imgur.com/7F3jOYl.jpg

L/R Side and back side grill and painting
*i.imgur.com/jwf1pfI.jpg
*i.imgur.com/IcurKzh.jpg

Top, Front, drawer flap, Side and Back grill fitting
*i.imgur.com/bIO4F3e.jpg
*i.imgur.com/XTIuxvR.jpg
*i.imgur.com/N14ltku.jpg
*i.imgur.com/pYujNyD.jpg
*i.imgur.com/5Gmw8VO.jpg
*i.imgur.com/7nM1r3F.jpg
*i.imgur.com/bphZdqB.jpg
*i.imgur.com/Wb89IEO.jpg
*i.imgur.com/eIWKIfC.jpg

- - - Updated - - -

Pre-sponsorsed final desk completed in red theme {Legs still under construction]
 

powerhoney

Cyborg Agent
Awesome... Btw, won't the lights be bothering you while you are working on the monitor as I guess they will be in your peripheral vision???
 

Faun

Wahahaha~!
Staff member
I keep my system open. This custom setup looks good. May be after 1 year I will try my hands at DIY.
 
OP
P

PramodHambir44841

Right off the assembly line
Wow! Awesome..Did you put glass over the top?

First, I installed the glass. However, NVIDIA sent me LED acrylic glass. Stay tune for more updates.

- - - Updated - - -

Awesome... Btw, won't the lights be bothering you while you are working on the monitor as I guess they will be in your peripheral vision???

Nope :D

- - - Updated - - -

I keep my system open. This custom setup looks good. May be after 1 year I will try my hands at DIY.

Good Luck and if you need any help... contact me anytime. I would like to help you.

- - - Updated - - -

How long did it take for this mod?

4 Months. Stay tune for more updates.

- - - Updated - - -

is this the inspiration for your mod?
Lian-Li Global | DK-Q2
*www.lian-li.com/en/files/2015/02/dkq2-main-1.jpg

I found this one after completing my Mod :p

- - - Updated - - -

nice mod, work well done..........

thanks.. more photos coming soon

- - - Updated - - -

Pre-sponsorsed final desk completed in red theme {Legs still under construction]
*i.imgur.com/6zNWyJU.jpg
*i.imgur.com/MEyCVnz.jpg
*i.imgur.com/3YhpUUe.jpg
*i.imgur.com/31jChYa.jpg
*i.imgur.com/1YQmVl0.jpg
*i.imgur.com/xeTjDhb.jpg
*i.imgur.com/zOxA47V.jpg
*i.imgur.com/PHjnrJk.jpg
*i.imgur.com/GjF9QeT.jpg
*i.imgur.com/lFBkSJO.jpg
*i.imgur.com/Y79vUrJ.jpg
*i.imgur.com/iAzwmMn.jpg
*i.imgur.com/zcelDId.jpg
*i.imgur.com/0b55h4a.jpg
*i.imgur.com/8aEbNam.jpg
*i.imgur.com/D9HYoX5.jpg
*i.imgur.com/s4oRkbW.jpg
*i.imgur.com/arR9hJc.jpg
*i.imgur.com/fAGbWRW.jpg
*i.imgur.com/uRZ9Qw3.jpg
*i.imgur.com/wUXORCD.jpg
*i.imgur.com/4WFzpCM.jpg
*i.imgur.com/dp7TAan.jpg
*i.imgur.com/a61Cvk3.jpg
*i.imgur.com/iZfbSHl.jpg
*i.imgur.com/xfkimKD.jpg
*i.imgur.com/CrhQ2Ns.jpg
*i.imgur.com/C0IJJcZ.jpg
*i.imgur.com/CTOiKAP.jpg
*i.imgur.com/7FglrwP.jpg
*i.imgur.com/L27QKnT.jpg
*i.imgur.com/UjOEszA.jpg

- - - Updated - - -

Red theme was made for AMD, however, As NVIDIA was sponsoring me so I've changed Red theme to NV Green/Black.

Stay tune for more updates.

- - - Updated - - -

· Started working on Base
*i.imgur.com/9qa42nH.jpg
*i.imgur.com/RLqO0ws.jpg
*i.imgur.com/Q2BWy3Q.jpg

· Changing Red Leds to green
*i.imgur.com/X2LAsW2.jpg
*i.imgur.com/2TrQtYt.jpg
*i.imgur.com/4bfzwBA.jpg
*i.imgur.com/cL4BFPV.jpg
*i.imgur.com/IwnqGQU.jpg
*i.imgur.com/QsBHLF0.jpg

· Sponsors Components Arrived
*i.imgur.com/mQ2yFk6.jpg
*i.imgur.com/W9oXyp9.jpg
*i.imgur.com/TO0SBkM.jpg
 

kARTechnology

Sony " VA" "IO"
Hard time cleaning the case after 3 months.
wish I had enought time...not even having time to be on TDF..
 
Last edited:
Top Bottom