jokerisdead
Right off the assembly line
Hi my name is Stenly I have just recently upgraded to Zotac Gtx 560 ti Card. My previous card was Sparkle 9500 gt.
My problem is whenever I play games like Bionic commando , Crysis 2 ,Just cause 2 etc at high or low Setting after few minutes or even in few seconds
I get a black screen and the system hangs. I have tried all the possible things I have also updated the drivers.
My Config :
Motherboard - Gigabyte G31M-ES2C
Processor - Core 2 Duo E7500 @ 2.93Ghz
PSU - Iball Stallion 600 watt
Ram - 4 GB
Cabinet - Iball Bullet
Previous Card - Sparkle 9500 gt
Current Card - Zotac 560 ti
I have sent my graphics card back to the zotac frm where i have bought
And got the new replaced Card.
But it is also giving the same problem.
The Zotac Tech suggested me to change the PSU
So I m plannig to get a new Corsair Gs700 or Gs800 Psu.
So can this PSU will solve my problem.
Bcause I m getting the same problem with my new replaced card.560 ti requires 31amp rail.
PLZ help.
I hve Attached my PSU spec.
My problem is whenever I play games like Bionic commando , Crysis 2 ,Just cause 2 etc at high or low Setting after few minutes or even in few seconds
I get a black screen and the system hangs. I have tried all the possible things I have also updated the drivers.
My Config :
Motherboard - Gigabyte G31M-ES2C
Processor - Core 2 Duo E7500 @ 2.93Ghz
PSU - Iball Stallion 600 watt
Ram - 4 GB
Cabinet - Iball Bullet
Previous Card - Sparkle 9500 gt
Current Card - Zotac 560 ti
I have sent my graphics card back to the zotac frm where i have bought
And got the new replaced Card.
But it is also giving the same problem.
The Zotac Tech suggested me to change the PSU
So I m plannig to get a new Corsair Gs700 or Gs800 Psu.
So can this PSU will solve my problem.
Bcause I m getting the same problem with my new replaced card.560 ti requires 31amp rail.
PLZ help.
I hve Attached my PSU spec.
