Zebronics Antibiotic design

Status
Not open for further replies.

geek007

Right off the assembly line
Hi All,

The zebronics antibiotic has three fans, one on side, temperature controlled rear fan and a switch operated roof fan. All three fans seem to be exhaust fans.

Would it improve cooling if you have a fan on front to pull air in , exhaust fan on rear, temperature controlled side panel fan to pull air in and switch operated roof exhaust fan ?

Thanks
 

adithyagenius

I WANT MORE FPS!!
If all are exhaust fans, the air will be forced to come inside from all holes its finds in the cabinet. That means very quick dust accumulation. Its better to have a fan to pull in air from one direction where there is less dust. Also the fan pulling in should not be near the exhaust fans because , the air there is very hot.
 

asheet

Journeyman
hi
The roof fan is temp dependeent
How do I configure the fans in bxt option so that one works as inwards air & two as exhaust all the time
pl advise
 

s18000rpm

ಠ_ಠ
^simple, reverese the fan assembly :p

unscrew the side fan & then fit it reversed:p (screw holes on both sides provided on all fans in this cabinet)
 
Status
Not open for further replies.
Top Bottom