tango_cash
In the zone
"Intel recommends the use of a 2x12 power connector or a 2x10 power conector...ERROR
hi my computer gave the following error message when started.
it was too long to note down so i took some pics of the screen and joined them.
se the picture below.
*img515.imageshack.us/img515/9546/problemcx9.th.jpg
my config is
cpu - 2.8gz intel hyperthreading
mobo - 915 gav intel orignal
250gb sata segate harddisk
intex cabinet with colorsit power supply.
now i had 2*256=512mb ram of hynix.
i recently got 1 256mb ram of DYNET company.
so i installed it also with the other two.
i have 4 slots for ram in my mobo and it supports upto 4gb ram.
one slot is empty and remaning 3 are occupied by the 3 256mb rams.
all of these rams are of 400mhz (atleast that's what is written on there labels)
i have bought a transcend jetram of 1 gb ddr400. i want to install it in the 4th slot so that will make my total ram 1768MB. but just when i was thinking of opening my cabinet and installing the new ram this error came.
however my systen started when i "pressed any key" at the message and after that i have restarted my system 2-3 times and the error has not come up.
Now i hear a beep everytime the system starts
what was that message about. pls help me.
Intel recommends the use of a 2x12 or a 2x10 power connector in conjunction with the 1x4 alternate power connector
and if want any more details pls tell me.
hi my computer gave the following error message when started.
it was too long to note down so i took some pics of the screen and joined them.
se the picture below.
*img515.imageshack.us/img515/9546/problemcx9.th.jpg
my config is
cpu - 2.8gz intel hyperthreading
mobo - 915 gav intel orignal
250gb sata segate harddisk
intex cabinet with colorsit power supply.
now i had 2*256=512mb ram of hynix.
i recently got 1 256mb ram of DYNET company.
so i installed it also with the other two.
i have 4 slots for ram in my mobo and it supports upto 4gb ram.
one slot is empty and remaning 3 are occupied by the 3 256mb rams.
all of these rams are of 400mhz (atleast that's what is written on there labels)
i have bought a transcend jetram of 1 gb ddr400. i want to install it in the 4th slot so that will make my total ram 1768MB. but just when i was thinking of opening my cabinet and installing the new ram this error came.
however my systen started when i "pressed any key" at the message and after that i have restarted my system 2-3 times and the error has not come up.
Now i hear a beep everytime the system starts
what was that message about. pls help me.
Intel recommends the use of a 2x12 or a 2x10 power connector in conjunction with the 1x4 alternate power connector
and if want any more details pls tell me.
Last edited: