Upgrade Help

[pulsar_swift]

buddy, front panel wiring must not have been done, check it.
Congrats on owning X6 1055T. First X6 on digit ?
Could you also share the price you paid for the components you listed above ?

 

[Piyush]

Processor : Phenom II X6 1055T
RAM : Transcend 2Gb DDR3-1333Mhz
Motherboard : Gigabyte GA-785GMT-USB3
Monitor : Benq 22Inch HDMI
PSU - Corsair 600 Watts
Cabinet - Zebronics Bizlee

Guys, Trust me.......... this proccy is a Monster. I must say that when tested the System after assembling, It froze up on the welcome Screen.

My IT guy already gave me the Updated BIOS. I only had to flash it from BIOS using QFLASH. Update was smooth and then it detected everything.

I have already started working on SONY VEGAS. Encoding is really fast.

Can't get the Front AUDIO OUT to work... Any suggestions ???

u already bought x6?when dude?
anyways congrats
do post some cool pics of ur pc

 

[asingh]

Could you post your whole system configuration here. Regarding sound, check if it is enabled from BIOS. Re check the header. If you would have told the motherboard, could have told you the PIN set up.

 

[msn]

If you would have told the motherboard

Motherboard - Gigabyte GA-785GMT-USB3

u already bought x6?when dude?
anyways congrats
do post some cool pics of ur pc

Thanks buddy. Yes. Will post pictures !!

 

[msn]

*lh6.ggpht.com/_mEHkzd4sUI0/S-PuVJ8e6jI/AAAAAAAAAGw/JpiY8xTsLCE/s400/IMG_1238.JPG


*lh5.ggpht.com/_mEHkzd4sUI0/S-PxEgLncsI/AAAAAAAAAHk/nVebXzBysok/s400/1.JPG

*lh6.ggpht.com/_mEHkzd4sUI0/S-PxEjlALhI/AAAAAAAAAHo/a6J96uI-2B0/s400/2.JPG


*lh4.ggpht.com/_mEHkzd4sUI0/S-P0XVF_McI/AAAAAAAAAIY/kDsQ3fifA7s/s400/IMG_1245.jpg

*lh6.ggpht.com/_mEHkzd4sUI0/S-P0W9Kn6lI/AAAAAAAAAIQ/sazk8YlZ66E/s400/IMG_1243.jpg
​

 

[Piyush]

*lh4.ggpht.com/_mEHkzd4sUI0/S-P0XVF_McI/AAAAAAAAAIY/kDsQ3fifA7s/s400/IMG_1245.jpg

*lh6.ggpht.com/_mEHkzd4sUI0/S-P0W9Kn6lI/AAAAAAAAAIQ/sazk8YlZ66E/s400/IMG_1243.jpg
​

nice pics dude
wallpaper looking refreshing
anyways which cabby it is?

 

[pulsar_swift]

read the post, its a zebronics bijli

 

[coderunknown]

@msn, nice buy. specially the monitor looks really good. good choice buddy. however the only thing i suspicious about is the CPUz reading. 1.552V for core is a bit too much high. for that voltage, an Intel proccy will burn to a piece of silicon & metal mix. have you turned AMD Cool & Quite on? also try lower the voltage, till your system stable (able pass benchmarks). you can keep it at stock, no problem. AMD done its homework. still lower is better

@piyush, from look most Digitians should be able tell it is Zebronics Bijli. the 120mm Blue LED & the heavily perforated front grill.

 

[Piyush]

no info regarding zebronics nfo , thats why..........
anyways is that cabby a good deal
also compare it to other brands in that price range

---------- Post added at 12:37 PM ---------- Previous post was at 12:36 PM ----------

read the post, its a zebronics bijli

oops missed that

 

[pulsar_swift]

you should look at ZEBRONICS REAPER available @ 2K. It has so much space

 

[Piyush]

but what about the quality and performance of zeb
i'm askin bcoz i dunno anythin about this brand

 

[pulsar_swift]

its a cabinet, it doesn't have any parts that can blow or need to repaired

 

[Piyush]

its a cabinet, it doesn't have any parts that can blow or need to repaired

hey whats that??
ok i'll go check myself

 

[pulsar_swift]

sorry piyush. I didnt get you. ?

 

[Piyush]

sorry piyush. I didnt get you. ?

umm...i was just askin the performance and features of zebronics cabbies as compared to other brands

anyways i was looking at different models
reaper is a good one i guess

 

[coderunknown]

umm...i was just askin the performance and features of zebronics cabbies as compared to other brands

anyways i was looking at different models
reaper is a good one i guess

Zebronics Cabby build quality not as good as the International Reputed cabby makers like NZXT, CM, Antec, etc. however for the price the Zebs are good buys. only things that usually goes bad are the LED fans & the temperature control panel.

 

[msn]

have you turned AMD Cool & Quite on?

No Idea dude ... I did not install any such software or did not configure COOL n QUITE.
Can u share the Idea behind this ?

 

[pulsar_swift]

login to BIOS and enable COOL n QUIET. Windows 7 gets a CnQ driver by default. No need to install it

 

[msn]

I logged in to BIOS, Found AMD K8 Cool n Quiet which shows two options - Auto or Disabled. Mine is selected to AUTO. I m sure its enabled.

 

[pulsar_swift]

Ok. Install core temp and see whats ur Vcore at idle