Tutorial: Flashing k550i to w610i !!
i have a question, is it possible, that someone could create a layout, so desktop in stanby mode would be completely clean? i mean no anything, like getting rid on OP. logo.. it would be nice to get rid of anything
I have created a tut on how to edit the layout... its in this thread... page 25 post no. 495... do whatever you want with it.... if you like the items to disappear just replace the Y2 value to -10... If you have more questions just tell me...
yes k550i is selling !!
its the best 2mp slim cam phone with good music . also v.good interface and hell of features .. same as in other high end SE phones !
its also selling because of this thread
HAHAHA.... I think so too...
Last edited:
OP
a_k_s_h_a_y
Dreaming
yes operator logo tut is posted by semaj .. check out
rustic0_0174
Right off the assembly line
Is there any patch to support MXE-60 accessory? That is the Xenon flash accessory of SE. Patch for K550@w610 R8ba024. Thanks!!!!!!!!
scream4u
Right off the assembly line
i'm havin a prob here.. i wanted to change the layout in my phone, but when i connect it, as usual, it sends me message below, and after that nothing..
20:14:05| Sending db2020_cid01_prodid_p3j.bin...
EDIT:
i think that the problem is my phone port, where u connect all the cables, coz it doesn't connect the charger.. and earphones play bad too...
so i'm planning on takni' it to the service, mby they can replace it, without the whole motherboard.. and my speaker doesn't work neither, i went to italy this summer, and it fell in sea but that's ok, it works fine, after flashing too..
so i hope they can change my shitty port
20:14:05| Sending db2020_cid01_prodid_p3j.bin...
EDIT:
i think that the problem is my phone port, where u connect all the cables, coz it doesn't connect the charger.. and earphones play bad too...
so i'm planning on takni' it to the service, mby they can replace it, without the whole motherboard.. and my speaker doesn't work neither, i went to italy this summer, and it fell in sea
but that's ok, it works fine, after flashing too.. so i hope they can change my shitty port
Last edited:
tripiatrik
Right off the assembly line
hello to all
Great site lots of good info!!!
I have a k530i /I flashed it to w660i but the fs
dosn't support hebrew language and now
I'm trying but without any seccess to ad hebrew language
to fs file.I extracted hebrew language file from another fs file
(K800_R8BA024_FS_S_ASIA_LEVAN_RED52.fbn) but how can
i mount this file to my FS file???
how can i upload the language files \TPA\PRESET\SYSTEM\LANGUAGE\** here **
Thanks ahead
Andrei
Great site lots of good info!!!
I have a k530i /I flashed it to w660i but the fs
dosn't support hebrew language and now
I'm trying but without any seccess to ad hebrew language
to fs file.I extracted hebrew language file from another fs file
(K800_R8BA024_FS_S_ASIA_LEVAN_RED52.fbn) but how can
i mount this file to my FS file???
how can i upload the language files \TPA\PRESET\SYSTEM\LANGUAGE\** here **
Thanks ahead
Andrei
OP
a_k_s_h_a_y
Dreaming
jmoncyo .. don't worry
scream4u ... nothing really .. don't worry flashing won't damage any hardware
hey Anderi .. wait i will find the firmwares and upload !! 2 days ??
scream4u ... nothing really .. don't worry flashing won't damage any hardware
hey Anderi .. wait i will find the firmwares and upload !! 2 days ??
MaDDoGBG
Right off the assembly line
Hi there.
I've got a problem.I used the layout.xml from page 25 with the operator logo
over the calls button.But ive got another line with it on the ordinary place.
With the original layout there are two lines with the operator logo but whatever layout i use the second line is always on the same place.
Can someone remove it?
I've got a problem.I used the layout.xml from page 25 with the operator logo
over the calls button.But ive got another line with it on the ordinary place.
With the original layout there are two lines with the operator logo but whatever layout i use the second line is always on the same place.
Can someone remove it?
tripiatrik
Right off the assembly line
Cool.
Thanks A k s h a y
a7med_el3ttar
Right off the assembly line
hi there,i have question plz.
i have a SE v630i and i wanna know can i use zoom in normal camera mode.by changing cam driver or somthing.plz help me
thanx in advance.
i have a SE v630i and i wanna know can i use zoom in normal camera mode.by changing cam driver or somthing.plz help me
thanx in advance.
Try this... tell me the result...
@akshay... I have now k550@w610main & k550FS... walkman is working fine but skins won't work... after flashing skins on phone you can see only unknown characters in the skins list of the phone and is not working... does this mean that walkman skins only work in w610FS... flash menus works perfectly....
Last edited:
OP
a_k_s_h_a_y
Dreaming
Skins do work even if k550 FS ! i know one guy who has always been on w610 main and k550 FS.. his name is munish he has used walkman skins.
are all the skins failing ?? then its bad.. because some times in w610i FS it happens. after deleting some skins that's what happened to me quite a few time. may be delete again and try
just ensure that there are no problems with the xml file in the skin
are all the skins failing ?? then its bad.. because some times in w610i FS it happens. after deleting some skins that's what happened to me quite a few time. may be delete again and try
just ensure that there are no problems with the xml file in the skin
MaDDoGBG
Right off the assembly line
OP
a_k_s_h_a_y
Dreaming
best way to delete stuff from phone is Far Manger
Far Manger is much powerful from XS++ .. now its JDFLASHER !!
Download far manager ..! goto far manager tutorial .. the Far Manger Tutorial Link i have sent you via private message ! check out !!
don't worry that far manager tutorial has links for far manager
you can far manager to upload walkman skins
i always use farmanager to upload walkman skins !!
Far Manger is much powerful from XS++ .. now its JDFLASHER !!
Download far manager ..! goto far manager tutorial .. the Far Manger Tutorial Link i have sent you via private message ! check out !!
don't worry that far manager tutorial has links for far manager
you can far manager to upload walkman skins
i always use farmanager to upload walkman skins !!
Last edited:
Help! My K550i@W610i screen just keep flashing after the patch. What's wrong with the procedure?
----------------------------------------
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35665701851592 CERT:RED
FLASH CID:52 COLOR:RED
Model:W610i
Brand:Sony Ericsson
MAPP CXC article: R6BC002 prgCXC1250750_TAIWAN_NA
MAPP CXC version: R6BC002
Language Package:TAIWAN
CDA article: CDA102763/4
CDA version: R2A
Default article: cxc1250755
Default version: R6BC002
Network LOCKED
Operator: 234-33
Elapsed:6 secs.
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3566570185xxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:3566570185xxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDRB2020_PRELOADER_FOR_SETOOL2
LDRB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\mok\Desktop\Sony Ericson\New Folder\qamaker\W610I_TAIWAN_R6BC002_RED52.bin
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\mok\Desktop\Sony Ericson\New Folder\qamaker\quick_access_W610_R6BC002.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45AC0000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:868 secs.
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3566570185xxxx CERT:RED
FLASH CID:52 COLOR:RED
Model:W610i
Brand:Sony Ericsson
MAPP CXC article: R6BC002 prgCXC1250750_TAIWAN_NA
MAPP CXC version: R6BC002
Language Package:TAIWAN
CDA article: CDA102763/4
CDA version: R2A
Default article: cxc1250755
Default version: R6BC002
Network LOCKED
Operator: 234-33
Elapsed:5 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:3566570185xxxx CERT:RED
LDRB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\mok\Desktop\Sony Ericson\New Folder\unlock.vkp
VKP script loaded OK. Lines: 7
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:37 secs.
----------------------------------------
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35665701851592 CERT:RED
FLASH CID:52 COLOR:RED
Model:W610i
Brand:Sony Ericsson
MAPP CXC article: R6BC002 prgCXC1250750_TAIWAN_NA
MAPP CXC version: R6BC002
Language Package:TAIWAN
CDA article: CDA102763/4
CDA version: R2A
Default article: cxc1250755
Default version: R6BC002
Network LOCKED
Operator: 234-33
Elapsed:6 secs.
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3566570185xxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:3566570185xxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR
B2020_PRELOADER_FOR_SETOOL2LDR
B2020 LOADER FOR SETOOL2Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\mok\Desktop\Sony Ericson\New Folder\qamaker\W610I_TAIWAN_R6BC002_RED52.bin
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\mok\Desktop\Sony Ericson\New Folder\qamaker\quick_access_W610_R6BC002.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45AC0000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:868 secs.
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3566570185xxxx CERT:RED
FLASH CID:52 COLOR:RED
Model:W610i
Brand:Sony Ericsson
MAPP CXC article: R6BC002 prgCXC1250750_TAIWAN_NA
MAPP CXC version: R6BC002
Language Package:TAIWAN
CDA article: CDA102763/4
CDA version: R2A
Default article: cxc1250755
Default version: R6BC002
Network LOCKED
Operator: 234-33
Elapsed:5 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:3566570185xxxx CERT:RED
LDR
B2020 LOADER FOR SETOOL2Starting to process VKP patch script: C:\Documents and Settings\mok\Desktop\Sony Ericson\New Folder\unlock.vkp
VKP script loaded OK. Lines: 7
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:37 secs.
OP
a_k_s_h_a_y
Dreaming
^^ well now in that case there is no way out !!!
You must Reflash FS and Main again !!
Or try to remove the patches that you applied !
You must Reflash FS and Main again !!
Or try to remove the patches that you applied !