parasharenator
Broken In
I have a desktop computer,wiz.
MSI P45 Neo-F,2x2GB Transcend(800 Mhz),Sapphire HD 4850 512 MB,WDC 640GB Green power,Corsair VX 450W,NZXT Apollo Chassis and Dell US 2208WFP
bought on 2nd October,2008.Backup-powered by APC 650 VA
I had hell lota viruses and bugs since few days(coz of not updating AVG free for 15-20)on XP SP3 based system.
And some weird things happened 2-3 days back;
1.When I used to insert the ethernet cable.(after booting into Windows) the monitor would go blank(with monitor going into Power Saver mode-coz of no input) almost instantly,,while the CPU would be still running(and not restarting)
2.then, The Next day
I got A BLUE SCREEN error.
saying that "my ati graphics driver(dnt remember the filename and other details exactly)has some problem or there's a problem with HArdware"
And bottom most line was:
"PHYSICAL MEMORY DUMP ERROR"
so,,i thought enuf of this MESS;
and formatted the primary(OS) partition and installed Vista Home Premium succesfully
and the screen showed system specs-4GB RAM,etc..after succesfully booting into Vista!
Didnt install any drivers,after that,switched it off.
was happy,,switched it off!!!
After restarting half an hour ago,,,there was no input to monitor(blank)
and CPU was continously restarting!
I reconected both ends of DVI cable(display)
AND
tried to take out RAM for cleaning(but the lower white Holder for the Ram was being obstructed by the GPU,,so didnt take out the ram succesfully)
and dont know,,,sumhow...
restart loop stopped ..but still system was not booting in(coz I could switch off the CPU by soft press and not 20 seconds long press,,needed when system has logged into Windows)
While the display was still dead allthroughout>>>>
And all this on 31st eve's >>>Got pissed off,,,slept at 11.30pm!!NO NEW YEAR WISHES
and then nxt day,,
sumhow out of magic,,the system booted into Vista succesfuly,,and display to the monitor was there(Only to find that recognised memory was just 2GB
so i called one of my "Hardware FRIEND" to look...
he said that top white notch of 2nd RAM stick is loose...
so he fixed that..
and again the VISCIOUS RESTART LOOP(display sitting DEAD)
and then...
we tried all the permutations,
for single RAM Stick,
and both raM sTICKS also...
BUT THIS RECYCLING LOOPS didnt stop(monitor always sitting with no display)
and then I SAID myself...HAPPY NEW YEAR!!!
P.S.-Iam totally screwed up now,,so would be unscrewing both the GPU,,and the RAMs again and TRY MY LUCK!!!
But,
GUYS PLEASE THINK AND HELP OUT>>>WHAT COULD BE THE POSSIBLE REASON????
MSI P45 Neo-F,2x2GB Transcend(800 Mhz),Sapphire HD 4850 512 MB,WDC 640GB Green power,Corsair VX 450W,NZXT Apollo Chassis and Dell US 2208WFP
bought on 2nd October,2008.Backup-powered by APC 650 VA
I had hell lota viruses and bugs since few days(coz of not updating AVG free for 15-20)on XP SP3 based system.
And some weird things happened 2-3 days back;
1.When I used to insert the ethernet cable.(after booting into Windows) the monitor would go blank(with monitor going into Power Saver mode-coz of no input) almost instantly,,while the CPU would be still running(and not restarting)
2.then, The Next day
I got A BLUE SCREEN error.
saying that "my ati graphics driver(dnt remember the filename and other details exactly)has some problem or there's a problem with HArdware"
And bottom most line was:
"PHYSICAL MEMORY DUMP ERROR"
so,,i thought enuf of this MESS;
and formatted the primary(OS) partition and installed Vista Home Premium succesfully
and the screen showed system specs-4GB RAM,etc..after succesfully booting into Vista!
Didnt install any drivers,after that,switched it off.
was happy,,switched it off!!!
After restarting half an hour ago,,,there was no input to monitor(blank)
and CPU was continously restarting!
I reconected both ends of DVI cable(display)
AND
tried to take out RAM for cleaning(but the lower white Holder for the Ram was being obstructed by the GPU,,so didnt take out the ram succesfully)
and dont know,,,sumhow...
restart loop stopped ..but still system was not booting in(coz I could switch off the CPU by soft press and not 20 seconds long press,,needed when system has logged into Windows)
While the display was still dead allthroughout>>>>
And all this on 31st eve's >>>Got pissed off,,,slept at 11.30pm!!NO NEW YEAR WISHES
and then nxt day,,
sumhow out of magic,,the system booted into Vista succesfuly,,and display to the monitor was there(Only to find that recognised memory was just 2GB
so i called one of my "Hardware FRIEND" to look...
he said that top white notch of 2nd RAM stick is loose...
so he fixed that..
and again the VISCIOUS RESTART LOOP(display sitting DEAD)
and then...
we tried all the permutations,
for single RAM Stick,
and both raM sTICKS also...
BUT THIS RECYCLING LOOPS didnt stop(monitor always sitting with no display)
and then I SAID myself...HAPPY NEW YEAR!!!
P.S.-Iam totally screwed up now,,so would be unscrewing both the GPU,,and the RAMs again and TRY MY LUCK!!!
But,
GUYS PLEASE THINK AND HELP OUT>>>WHAT COULD BE THE POSSIBLE REASON????
Last edited: