Suggest me two fans, please :)

ithehappy

ithehappy

Human Spambot
I will buy two fans for my cabby tomorrow as it's summer and the idle temperature is hitting almost 50°C:-(. One will be for my Cooler, Hyper 212+ and the other will be placed either at the top or side panel of cabby. Please tell me which fan should I buy? I don't need any LED fans but the one's which will have maximum RPM to cool the temp inside the cabby.
Thanks in advance.
 
asingh

asingh

Aspiring Novelist
Just pick up CM 120mm ones. You cannot go wrong with them. They do the job decent.
 
tkin

tkin

Back to school!!
ithehappy said:
Ok, thanks. But can you please specify which one's? Coz there are more than one 120mm fan of CM available. :)
Click to expand...
Buy the cooler master led fan, only one type is made available, it will have 2000rpm written on the cover, the non led version is 1200rpm(the faster non led version is usually not available here).
 
Krow

Krow

Crowman
For the cooler, I wouldn't use the CM 120mm fans. Honestly, they are good for HDD intake or cabby exhaust, but not the cooler.

I recommend this one for the cooler: *www.mediahome.in/index.php?page=sh...ategory_id=17&option=com_virtuemart&Itemid=80

or this one: *www.mediahome.in/index.php?page=sh...ategory_id=17&option=com_virtuemart&Itemid=80

The Delta ones are really good. I am using them on my TRUE and they make a lot of difference as they create a very high air pressure.

---------- Post added at 12:55 PM ---------- Previous post was at 12:54 PM ----------

And yeah, they are a tad bit noisy though. Not annoyingly noisy, but just a little.
 
OP
ithehappy

ithehappy

Human Spambot
@mitraark, Yep, not 50, but 46-47 for sure. Now I understand why a lot of people avoid this freak hot processor. (Though my room temp is darn high at 31.5°C)
@Krow, Thanks a lot fyi. 2900rpm!, wow that gotta be noisy, anyway that doesn't matter to me, hope I'll get that in the Kolkata stores, otherwise have to try online. :)
I thought that I would buy two Delta fans and put them on both side of my cooler and the CM fan which is currently at the cooler I will put that on the top of my cabby. Will there be any problem if I do so?
 
Last edited:
tkin

tkin

Back to school!!
ithehappy said:
@mitraark, Yep, not 50, but 46-47 for sure. Now I understand why a lot of people avoid this freak hot processor. (Though my room temp is darn high at 31.5°C)
@Krow, Thanks a lot fyi. 2900rpm!, wow that gotta be noisy, anyway that doesn't matter to me, hope I'll get that in the Kolkata stores, otherwise have to try online. :)
I thought that I would buy two Delta fans and put them on both side of my cooler and the CM fan which is currently at the cooler I will put that on the top of my cabby. Will there be any problem if I do so?
Click to expand...
Forget idle, what's the load under orthos prime?
 
Krow

Krow

Crowman
ithehappy said:
@Krow, Thanks a lot fyi. 2900rpm!, wow that gotta be noisy, anyway that doesn't matter to me, hope I'll get that in the Kolkata stores, otherwise have to try online. :)
I thought that I would buy two Delta fans and put them on both side of my cooler and the CM fan which is currently at the cooler I will put that on the top of my cabby. Will there be any problem if I do so?
Click to expand...

Not that I know of. I have a TRUE 120 back home. Using two Deltas in push pull. The difference was stark.

Stock cooler: Idle:52, Load:78 deg celsius.
TRUE Passive: Idle 46, Load 75
TRUE + 2xDelta push pull: Idle: 36, Load 55.

---------- Post added at 02:53 PM ---------- Previous post was at 02:49 PM ----------

Oh yeah, my processor is AMD Phenom II X4 940 BE
 
tkin

tkin

Back to school!!
ithehappy said:
Thanks krow. Will order a pair of them today. :)
Is Mediahome a reliable seller?
Click to expand...
Yeah, my friend bought a steelseries mouse from him(in techenclave), received in good condition, so that's one good delivery I can vouch for, I can't guarantee though as I never got anything from him, he lists in ebay as well.
 
papul1993

papul1993

not a newbie.....
Just buying and fixing fans in every possible place in the cabinet won't help. You need to adjust air flow. Make sure cool air going to where it should and not going out thru exhaust fans. :p I think Digit wrote an article about it once.
 
You must log in or register to reply here.
Top Bottom