Hi all... I'm new here and I already have a problem...
Okay, so i just got back to NY where i left my old PC for over a month now... I re-assembled everything [including HDDs, Optical Drives and GFX card] ... I took them to India for the last month...
Everything worked FINE in India... But here after I assembled everything, I don't get video signal...
First I got the POST beep... but no signal... couldn't tell if it was loading the OS... but now... I get two more beeps after [much quicker] after the POST beep... Don't know what that means...
It's like >> Computer turned on >> Fans whoosshh >> Beep [hopefully POST] >> Pause >> BeepBeep [No Idea
] >> DEAD O_O ...
At this point [the DEAD point], Computer turns off by tapping power button, indicating its still in BIOS... and Ctrl+Alt+Del works... restarts the ****... and same thing again...
I tried switching RAMs, using them independently... no good...
I tried clearing CMOS, resetting BIOS... no good...
I hardly suspect that the video card is faulty, 'cause I used the same thing for a month back in India...
The monitor itself is working, I plugged it in to my laptop, and it works FINE...
My computer knowledge is decent, and i can do some messing around once you guys tell me to... So here's my problem... Hope I get answers... Without my baby, I'm half dead... So please help...
Computer Config:
ASUS M4A77T/USB3 motherboard
AMD Phenom II x4, 965BE, 3.8 GHz [overclocked]...
2 Corsair RAMs [ 2x 2GB = 4GB ]
NVIDIA 9400GT, 1 GB gfx card... connected with analog cable to a 20" LG monitor...
2 optical drives [1 SATA II, 1 IDE connected]
3 HDDs [2 SATA II = 1.25TB, 1 IDE = 40GB]
~650W PSU with active PFC...
ohh and one more thing... HELPPPP!!!

Okay, so i just got back to NY where i left my old PC for over a month now... I re-assembled everything [including HDDs, Optical Drives and GFX card] ... I took them to India for the last month...
Everything worked FINE in India... But here after I assembled everything, I don't get video signal...

It's like >> Computer turned on >> Fans whoosshh >> Beep [hopefully POST] >> Pause >> BeepBeep [No Idea

At this point [the DEAD point], Computer turns off by tapping power button, indicating its still in BIOS... and Ctrl+Alt+Del works... restarts the ****... and same thing again...

I tried switching RAMs, using them independently... no good...
I tried clearing CMOS, resetting BIOS... no good...
I hardly suspect that the video card is faulty, 'cause I used the same thing for a month back in India...
The monitor itself is working, I plugged it in to my laptop, and it works FINE...
My computer knowledge is decent, and i can do some messing around once you guys tell me to... So here's my problem... Hope I get answers... Without my baby, I'm half dead... So please help...

Computer Config:
ASUS M4A77T/USB3 motherboard
AMD Phenom II x4, 965BE, 3.8 GHz [overclocked]...
2 Corsair RAMs [ 2x 2GB = 4GB ]
NVIDIA 9400GT, 1 GB gfx card... connected with analog cable to a 20" LG monitor...
2 optical drives [1 SATA II, 1 IDE connected]
3 HDDs [2 SATA II = 1.25TB, 1 IDE = 40GB]
~650W PSU with active PFC...
ohh and one more thing... HELPPPP!!!



Last edited: