Post your latest Purchase

Fahd.Malik

Broken In
Re: Post what you purchased.

Hi
Finally i bought my Rig today :D from SMC international, nehru place

Proccy: E7200, 5700/-
Mobo : Abit IP35P , they did not had IP35E. 5200/-
Ram: 1GB 800 MHz 1050/-
HDD: WD 250GB. 2350/-
GPU: xfx 8600GT ddr3 256mb. 4700/-
Cabinet: CM 330 Elite. 1550/-
PSU: CM 390 Extreme(budget constraint, and SMC ensured me that it will work good for me. 1600/-
DVDWR: Sony 1150/-
Speakers: creative inspire 2.1 . 1500/-


Total cost i paid after VAT : 25600/-

Well i felt that i could have bargained more, but i was fine till these items didn't crossed my budget..

I hope its good config :)
 

keith_j_snyder2

Rising ApocalypsE
Re: Post what you purchased.

^ Congrats man!
Seems like u are the first one on the forum to have E7200!
Great pricing!

Should have gone for 2GB, but u can add 1GB stick later too!
 

gary4gar

GaurishSharma.com
Re: Post what you purchased.

Bought from IndiaTimes Shopping for Rs3,900

Ordered on Monday, got it today!
*farm3.static.flickr.com/2211/2513805038_e1b0154b54_m.jpg

*farm4.static.flickr.com/3241/2513765512_1241f360a1_m.jpg
Any reason for buying online?
 

Fahd.Malik

Broken In
Re: Post what you purchased.

^ Congrats man!
Seems like u are the first one on the forum to have E7200!
Great pricing!

Should have gone for 2GB, but u can add 1GB stick later too!

Thanks :)
Yup i will add 1GB ram next month for sure.
E7200 is a nice proccy and definatly better than E4xxx series which was in the same price range. And wil little over clock , it can surpass E6550 too.
:D
I hope 390W wont be less for me.
 

coolpcguy

Resistance is Futile.
Re: Post what you purchased.

@Gary4gar Couldnt find it in shops. Went to Univercell, Hotspot, MobileStore and Subhiksha. All had only Mono headsets
 

cpyder

CpyderGraphix
Re: Post what you purchased.

Wacom Intuos3 SE .. Something that I've wanted for long (make that..mmm.. four years??). Beautiful stuff. - alongwith Photoshop CS3

Oh Yes.. price : Rs 16k + 14K :)

Already tried my hand at drawing .. here it is :-
 

keith_j_snyder2

Rising ApocalypsE
Re: Post what you purchased.

Thanks :)
Yup i will add 1GB ram next month for sure.
E7200 is a nice proccy and definatly better than E4xxx series which was in the same price range. And wil little over clock , it can surpass E6550 too.
:D
I hope 390W wont be less for me.

E7200 is a penryn family processor and an overclocker friendly, indeed it is better than E6550.

390W is fine unless u have some power hungry stuff. It's fine though u should 've opted for 450W PSU. Not sure, but overclocking might face some trouble.
Check for ur power requirements here
 

Fahd.Malik

Broken In
Re: Post what you purchased.

Thanks a lot, that link was helpfull!
It showed that i need minimum of 290W PSU to run my present config.

I haven't tried ocing yet on this proccy, but i hope i will be able to take it to 3Ghz with this PSU without any probs?
 

keith_j_snyder2

Rising ApocalypsE
Re: Post what you purchased.

^ Dude! U did not realize but the processor u have is a 45nm Wolfdale from Penryn family.
The Penryn family processors are made for super-overclocking.

The 3GHz barrier was achievable from 65nm Conroe E6xxx series.
The Penryn is made to reach 4GHz barrier!
 
Top Bottom